PEUGEOT 306 Saloon 1.4 Poly v-belt kit (65 hp Petrol K5A (TU3))
Recommended part replacement interval for your car for the part category Poly v-belt kit: every 70.000 km
- Number of ribs: 5
- Length [mm]: 890
- Number of belts: 1
- Number of track rollers: 1
- Weight [g]: 740
- Item number: 542R1037
- Our price: 40,48 €
- Manufacturer: RIDEX
- EAN number: 4066016844775
- Condition: New
- Number of ribs: 5
- Length [mm]: 890
- Number of belts: 1
- Number of track rollers: 1
- Weight [g]: 740
- Item number: SKRBS-1201035
- Our price: 40,48 €
- Manufacturer: STARK
- EAN number: 4066016844768
- Condition: New
- Number of ribs: 5
- Length [mm]: 890
- Number of track rollers: 1
- Number of belts: 1
- Item number: KA866.13
- Our price: 38,99 €
- Manufacturer: SNR
- EAN number: 3413520551643
- Condition: New
Number of rollers:1
price incl. 19% VAT
excl. delivery costs
- Number of ribs: 5
- Length [mm]: 1253
- Vehicle Equipment: for vehicles with air conditioning
- Number of track rollers: 1
- Number of belts: 1
- Item number: KA866.15
- Our price: 49,99 €
- Manufacturer: SNR
- EAN number: 3413520551667
- Condition: New
Number of rollers:1
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: BOSCH
- Brake Disc Type: solid
- Drilled: no
- Braking / Drive Dynamics: for vehicles without ABS
- Brake Disc Thickness [mm]: 10
- Height [mm]: 34
- Centering Diameter [mm]: 66
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Item number: P1141P
- Manufacturer: LPR
- EAN number: 8032532073988
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: ATE
- Brake Disc Type: internally vented
- Drilled: no
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Thickness [mm]: 20,4
- Height [mm]: 34,3
- Centering Diameter [mm]: 66
- Number of Holes: 4
- Minimum thickness [mm]: 18,5
- Item number: P1171V
- Manufacturer: LPR
- EAN number: 8032532074015
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Quantity Unit: Axle Set
- Length [mm]: 105
- Width [mm]: 55
- Thickness 1 [mm]: 11
- Test Mark: ECE R90 Approved
- Weight [kg]: 0,886
- Observe service information
- Item number: 16189
- Our price: 16,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816161899
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Quantity Unit: Axle Set
- Length [mm]: 130
- Width [mm]: 56
- Thickness 1 [mm]: 19
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,564
- Observe service information
- Item number: 16237
- Our price: 24,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816162377
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Brake Disc Type: internally vented
- Quantity Unit: Axle Set
- Length [mm]: 141, 140
- Width [mm]: 47
- Thickness 1 [mm]: 17
- Test Mark: ECE R90 Approved
- Weight [kg]: 1,234
- Observe service information
- Item number: 16259
- Our price: 24,99 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816162599
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter [mm]: 247
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 8
- Centering Diameter [mm]: 71
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 108
- Thickness [mm]: 25
- Minimum thickness [mm]: 6
- Weight [kg]: 2,6
- Engine Code: TU3
- Number of mounting bores: 2
- Observe service information
- Item number: 17820
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816178200
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 247
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Braking / Drive Dynamics: for vehicles with ABS
- Brake Disc Thickness [mm]: 20,5
- Height [mm]: 34
- Centering Diameter [mm]: 66
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 18,5
- Thread Size: 13,6
- Colour: black
- Test Mark: E1 90R-02 C0176 / 0635
- Item number: DF1221
- Manufacturer: TRW
- EAN number: 3322936122104
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 11
- Supplementary Info: Q+, original equipment manufacturer quality
- Quantity Unit: Axle Set
- Height [mm]: 54,7
- Width [mm]: 105,0
- Weight [kg]: 0,888
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 12,7
- Item number: V22-0001
- Our price: 14,99 €
- Manufacturer: VAICO
- EAN number: 4046001333859
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Brake Disc Type: Vented
- Thickness [mm]: 17
- Product line: Prime
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 47
- Width [mm]: 141
- WVA Number: 21430, 21432
- Warning Contact Length [mm]: 225
- Item number: P 61 054
- Our price: 22,49 €
- Manufacturer: BREMBO
- EAN number: 8020584056301
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 247
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 66
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 108
- Thickness [mm]: 34
- Minimum thickness [mm]: 9
- Weight [kg]: 3,09
- Number of mounting bores: 2
- Observe service information
- Item number: 10314
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816103141
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 247
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 20
- Centering Diameter [mm]: 66
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 108
- Thickness [mm]: 34
- Minimum thickness [mm]: 18,5
- Weight [kg]: 4,13
- Number of mounting bores: 2
- Observe service information
- Item number: 10316
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816103165
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Diameter [mm]: 248
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 13
- Centering Diameter [mm]: 66
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 108
- Thickness [mm]: 34
- Minimum thickness [mm]: 11
- Weight [kg]: 3,9
- Number of mounting bores: 2
- Observe service information
- Item number: 11105
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816111054
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 247
- Brake Disc Type: solid
- Drilled: no
- Surface: Painted
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Braking / Drive Dynamics: for vehicles without ABS
- Brake Disc Thickness [mm]: 10
- Height [mm]: 34,2
- Centering Diameter [mm]: 66
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Thread Size: 13
- Colour: black
- Test Mark: E190R-02C0190 / 0563
- Item number: DF1217
- Manufacturer: TRW
- EAN number: 3322936121701
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Braking / Drive Dynamics: for vehicles without ABS
- Thickness [mm]: 18
- Product line: COTEC
- Quantity Unit: Axle Set
- Height [mm]: 54,3
- Width [mm]: 105
- Test Mark: E1 90R 01024 / 004
- Manufacturer Restriction: BENDIX
- Item number: GDB1033
- Our price: 21,99 €
- Manufacturer: TRW
- EAN number: 3322936410331
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: incl. wear warning contact
- Braking / Drive Dynamics: for vehicles with ABS
- Thickness [mm]: 17
- Product line: COTEC
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 47,5
- Width 2 [mm]: 141,4
- Width 1 [mm]: 140,2
- Test Mark: E1 90R 01024 / 074
- Manufacturer Restriction: ATE
- Warning Contact Length [mm]: 265
- Item number: GDB1104
- Our price: 26,99 €
- Manufacturer: TRW
- EAN number: 3322936411048
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Lucas - Girling
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19
- Supplementary Info: Q+, original equipment manufacturer quality
- Quantity Unit: Axle Set
- Height [mm]: 56,1
- Width [mm]: 129,8
- Weight [kg]: 1,615
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 16
- Item number: V22-0079
- Our price: 23,99 €
- Manufacturer: VAICO
- EAN number: 4046001387418
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.