VW Tiguan Allspace (BW2) 2.0 TSI 4motion Transfer box oil (185 hp Petrol DPJA)
Recommended part replacement interval for your car for the part category Transfer box oil: every 50.000 km
- Drive Type: All-wheel drive (regulated electronically)
- Transmission Type: for transfer case
- Colour: yellow
- Capacity [litre]: 1
- Recommended change interval [years]: 2
- Packing Type: Bottle
- Observe the vehicle manufacturer specifications
- Observe system fill quantity
- Oil: Full Synthetic Oil
- Manufacturer recommendations: BMW DTF-1, MB 239.41, TF 0870 (B)
- Item number: V60-0430
- Our price: 40,49 €
- Manufacturer: VAICO
- EAN number: 4062375252343
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Oil manufacturer recommendation: BMW DTF 1, MB 239.41, TF 0870 (B)
- Transmission Type: for transfer case
- Drive Type: All-wheel drive (regulated electronically)
- Colour: yellow
- Capacity [litre]: 5
- Observe the vehicle manufacturer specifications
- Packing Type: Canister
- Observe system fill quantity
- Recommended change interval [years]: 2
- Oil: Full Synthetic Oil
- Item number: V60-0431
- Our price: 175,99 €
- Manufacturer: VAICO
- EAN number: 4062375252374
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
- Transmission Type: for transfer case
- Drive Type: All-wheel drive (regulated electronically)
- Colour: yellow
- Capacity [litre]: 20
- Packing Type: Canister
- Recommended change interval [years]: 2
- Observe system fill quantity
- Observe the vehicle manufacturer specifications
- Oil: Full Synthetic Oil
- Manufacturer recommendations: BMW DTF-1, MB 239.41, TF 0870 (B)
- Item number: V60-0432
- Our price: 646,50 €
- Manufacturer: VAICO
- EAN number: 4062375252381
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: ATE
- for PR number: 2ER, 2EI, 2EM, 1KZ, 2EV, 1KU
- Construction Year to: 07 / 2021
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 16
- Product line: Prime
- Quantity Unit: Axle Set
- Height 1 [mm]: 56
- Height 2 [mm]: 61
- Width [mm]: 123
- WVA Number: 25009, 25011
- Item number: P 85 124
- Our price: 27,99 €
- Manufacturer: BREMBO
- EAN number: 8020584103975
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- for PR number: 1KU, 2EI, 2EM
- Construction Year to: 07 / 2021
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 16,4
- Quantity Unit: Axle Set
- Height 1 [mm]: 61,2
- Height 2 [mm]: 56,2
- Width [mm]: 123,2
- WVA Number: 25009
- Weight [kg]: 1,05
- Article number of recommended accessories: 82503500
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2500901
- Our price: 38,49 €
- Manufacturer: TEXTAR
- EAN number: 4019722452529
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- for PR number: 1KU, 2EI, 2EM
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Product line: PRO
- Brake Disc Thickness [mm]: 12
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 05 / 10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 10
- Inner Diameter [mm]: 172,7
- Weight [kg]: 5,2
- Packaging length [cm]: 30,8
- Packaging width [cm]: 30,8
- Packaging height [cm]: 12,7
- Item number: 92255403
- Manufacturer: TEXTAR
- EAN number: 4019722456206
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Thickness [mm]: 16,4
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height 1 [mm]: 61,1
- Height [mm]: 56,1
- Width [mm]: 123
- WVA Number: 25010
- Test Mark: R90 Homologated
- Weight [kg]: 1,11
- Quantity per axle: 1, 4
- Packing Type: Box
- Number of springs: 2
- Packaging length [cm]: 16,51
- Packaging width [cm]: 12,7
- Packaging height [cm]: 4,826
- Item number: FDB4434
- Our price: 27,49 €
- Manufacturer: FERODO
- EAN number: 4044197624805
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 13,86
- Tightening Torque [Nm]: 120
- Version: JC
- Packing Type: Box
- Packaging width [cm]: 31,5
- Packaging height [cm]: 12
- Item number: 562432JC
- Manufacturer: JURID
- EAN number: 3306437236263
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height 1 [mm]: 57
- Height [mm]: 57
- Width [mm]: 123
- WVA Number: 25011
- Test Mark: R90 Homologated
- Weight [kg]: 1,128
- Packing Type: Box
- Packaging length [cm]: 16,8
- Packaging width [cm]: 12,7
- Packaging height [cm]: 4,7
- Item number: 573415J
- Our price: 23,49 €
- Manufacturer: JURID
- EAN number: 3306437237352
- Condition: New
- Fitting Position: Front Axle
- Brake System: TRW
- for PR number: 1LA, 1LW
- Wear Warning Contact: with integrated wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 20
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height [mm]: 69,5
- Width [mm]: 175,2
- WVA Number: 24738
- Weight [kg]: 2,81
- directional
- Observe mounting information
- Packaging length [cm]: 20,9
- Packaging width [cm]: 13,4
- Packaging height [cm]: 8,8
- Item number: 2473803
- Our price: 56,49 €
- Manufacturer: TEXTAR
- EAN number: 4019722472428
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 16,4
- Quantity Unit: Axle Set
- Height 1 [mm]: 56,1
- Height [mm]: 56,1
- Width [mm]: 123
- WVA Number: 25008, 25010
- Test Mark: R90 Homologated
- Weight [kg]: 1,11
- Packing Type: Box
- Packaging length [cm]: 16,8
- Packaging width [cm]: 12,7
- Packaging height [cm]: 4,7
- Customs tariff number: 87083091
- Item number: 573409J
- Our price: 23,49 €
- Manufacturer: JURID
- EAN number: 3306437237239
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 49
- Minimum thickness [mm]: 20
- Number of mounting bores: 1
- Observe service information
- Item number: 24386
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816243861
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Hub Diameter [mm]: 150
- Replace in pairs only
- Item number: 110 418
- Manufacturer: TOPRAN
- EAN number: 6156450000023
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 314
- for PR number: 1LW, 1LX
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Product line: COAT Z
- Brake Disc Thickness [mm]: 30
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 27
- Weight [kg]: 9,4
- Test Mark: ECE R90 APPROVED
- Item number: 600.3242.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238750635
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- for PR number: 1LA
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 50
- Minimum thickness [mm]: 27
- Number of mounting bores: 1
- Observe service information
- Item number: 39129
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816391296
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- for PR number: 1KU, 2EM, 2EI, 1KZ, 2ER, 2EV
- Wear Warning Contact: not prepared for wear warning indicator
- Thickness [mm]: 16,2
- Supplementary Info: DTEC COTEC
- Quantity Unit: Axle Set
- Height 1 [mm]: 56,2
- Height 2 [mm]: 61,2
- Width [mm]: 123
- Test Mark: E9 90R-02A0118 / 3530
- Manufacturer Restriction: ATE
- Item number: GDB1957
- Our price: 28,49 €
- Manufacturer: TRW
- EAN number: 3322938162245
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ, 2ER, 2EV
- Brake Disc Type: Externally Vented
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 05 / 10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169,4
- Weight [kg]: 7
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 12,5
- Item number: 92140700
- Manufacturer: TEXTAR
- EAN number: 4019722274688
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ, 2ER, 2EV
- Brake Disc Type: Externally Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Product line: PRO
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 05 / 10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169,4
- Weight [kg]: 7
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 12,5
- Item number: 92140703
- Manufacturer: TEXTAR
- EAN number: 4019722302503
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KZ
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 49
- Minimum thickness [mm]: 20
- Number of mounting bores: 1
- Observe service information
- Item number: ADV184310
- Manufacturer: BLUE PRINT
- EAN number: 5050063006353
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 340
- for PR number: 1LA, 1LB
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 30
- Height [mm]: 49,6
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Hub Diameter [mm]: 156
- Replace in pairs only
- Item number: 114 839
- Manufacturer: TOPRAN
- EAN number: 1102960000010
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs