Jeep Grand Cherokee wk2 5.7 Wheel spacers (366 hp Petrol EZH)

29.) These wheel spacers are mounted to the car with the DR = The wheel spacer should be fitted between the wheel Please note additional information and vehicle-specific and the axial hub using longer bolts not supplied - please original fastening elements.Additional accessory is not technical notes! needed. Make sure the length of the original stud bolts is order separately. When ordering the longer bolts please adequate. state which cone type you require (i.e. taper, round, loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.