FORD Sierra Mk2 Estate (BNG) 1.6 i Wheel spacers (80 hp Petrol L6B)

18.) These spacers without a double-sided centering are DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be in the wheel flanges or the brake drums, of the existing only useable for cars with a sufficient length of the sealed watertight by mounting the spacers. technical notes! centering to be able to center the wheels enough despite knurl bolts with the approprirate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should the spacer. the be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be in the wheel flanges or the brake drums, of the existing sealed watertight by mounting the spacers. technical notes! knurl bolts with the approprirate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should the be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!

3.) All DR-Systems require longer wheel-bolts. These have DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be in the wheel flanges or the brake drums, of the existing sealed watertight by mounting the spacers. technical notes! to be knurl bolts with the approprirate longer H&R knurl bolts. ordered separately. When ordering wheel-bolts please follow The longer H&R knurl bolts are supplied. The wheels should the be fitted using the existing wheel nuts provided with these guidelines: If possible name the type of the wheel when ordering. the wheels. All fixing-accessories are included! New bolts must be longer than the original ones by half of the total Track-widening. For example: With a 30 mm DR-kit you will require bolts that are 15 mm longer than the original bolts. The bold-head must be identical to the existing bolt: Taper 60° Round-head for M12/d24 mm, for M14/d28 mm Round-head for M12/d26 mm (e.g. OE VAG-wheels) Flat-head with disc for CITROEN/PEUGEOT-vehicles M12x1,25 Flat-head for PORSCHE-original-wheels M14x1,5 Safety Guidelines (No. of turns for wheel screws) M12x1,5 = 6,5 turns = approx. 10 mm of load bearing shaft length M12x1,25 = 8,0 turns = approx. 10 mm of load bearing shaft length M12x1,75 = 6,5 turns = approx. 12 mm of load bearing shaft length M14x1,5 = 7,5 turns = approx. 12 mm of load bearing shaft length 1/2"UNF = 8,0 turns = approx. 11 mm of load bearing shaft length Please ensure that the wheel screws do not damage any part of the brake system (ABS sensors etc.) Turn the wheel first by hand and check clearance on the inside (max. tolerance for some vehicles is only 2 mm (RA Mercedes).

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be of sealed watertight by mounting the spacers. technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific Please note that the wheel hubs on the rear axle have to be sealed watertight by mounting the spacers. technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!