Ford Mondeo mk3 Saloon 2.2 TDCi Wheel spacers (155 hp Diesel QJBA)

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

30.) Mounting the longer stud bolts may require extensive 8.) If the depth of the spacer is smaller than the length DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific effort. If applicable, the wheel bearings have to be in the wheel flanges or the brake drums, of the existing of technical notes! knurl bolts with the approprirate longer H&R knurl bolts. renewed. the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the The longer H&R knurl bolts are supplied. The wheels should standard studs should be shortened so far that a complete the be fitted using the existing wheel nuts provided with contact of the wheel to the contact-surface is guaranteed. the wheels. All fixing-accessories are included!

30.) Mounting the longer stud bolts may require extensive 8.) If the depth of the spacer is smaller than the length DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific effort. If applicable, the wheel bearings have to be in the wheel flanges or the brake drums, of the existing of technical notes! knurl bolts with the approprirate longer H&R knurl bolts. renewed. the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the The longer H&R knurl bolts are supplied. The wheels should standard studs should be shortened so far that a complete the be fitted using the existing wheel nuts provided with contact of the wheel to the contact-surface is guaranteed. the wheels. All fixing-accessories are included!

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

8.) If the depth of the spacer is smaller than the length DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific in the wheel flanges or the brake drums, of the existing of technical notes! knurl bolts with the approprirate longer H&R knurl bolts. the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the The longer H&R knurl bolts are supplied. The wheels should standard studs should be shortened so far that a complete the be fitted using the existing wheel nuts provided with contact of the wheel to the contact-surface is guaranteed. the wheels. All fixing-accessories are included!

8.) If the depth of the spacer is smaller than the length DRS = The fitting of the DRS-System requires the exchange Please note additional information and vehicle-specific in the wheel flanges or the brake drums, of the existing of technical notes! knurl bolts with the approprirate longer H&R knurl bolts. the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the The longer H&R knurl bolts are supplied. The wheels should standard studs should be shortened so far that a complete the be fitted using the existing wheel nuts provided with contact of the wheel to the contact-surface is guaranteed. the wheels. All fixing-accessories are included!

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub For export use only. Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).