Chevrolet Corvette C6 Convertible 6.2 Wheel spacers (430 hp Petrol LS3(376CUV8))

18.) These spacers without a double-sided centering are DR = The wheel spacer should be fitted between the wheel Please note additional information and vehicle-specific and the axial hub using longer bolts not supplied - please only useable for cars with a sufficient length of the technical notes! centering to be able to center the wheels enough despite order separately. When ordering the longer bolts please state which cone type you require (i.e. taper, round, the spacer. loose round or flat) and the required extra length. All screws for the DR systems have to be orderded separately.

One packaging unit contains two Pro-Spacers. Pro-Spacer-Systems 4,5,6,7 and 8 include all necessary mounting parts (bolts, nuts).

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.

8.) If the depth of the spacer is smaller than the length DRM = The wheel spacer should be attached to the axial hub Please note additional information and vehicle-specific of technical notes! using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the the standard studs, the employed wheels must show gaps in the contact-surface. If using wheels without gaps the wheels. All fixing-accessories are included! standard studs should be shortened so far that a complete contact of the wheel to the contact-surface is guaranteed.