VW Polo 5 Saloon 1.2 TSI Timing chain guides (105 hp Petrol CBZB)
Recommended part replacement interval for your car for the part category Timing chain guides: every 150.000 km
- Fitting Position: Right
- Driven Units: Camshaft
- Base body material: Polyamid 6.6
- Item number: 119 271
- Our price: 20,49 €
- Manufacturer: TOPRAN
- EAN number: 221024924503631245036
- Condition: New
- Consult accessories list for recommended additional repairs
- Production date from: 07.11.2011
- Material: Plastic
- Base body material: Polyamid 6.6, GRP (Glass fibre Reinforced Plastic)
- Item number: 119 261
- Our price: 12,99 €
- Manufacturer: TOPRAN
- EAN number: 221024917896506178965
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KK, 1KT, 1KV
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 25,99 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KK, 1KT, 1KV
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2820.2
- Our price: 37,49 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Brake System: Volkswagen
- for PR number: 1ZG, 1LR, 1ZJ
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,6
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0258 / 0212
- MAPP code available
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7111.2
- Our price: 56,49 €
- Manufacturer: ATE
- EAN number: 4006633339919
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Brake System: ATE
- for PR number: 1LN, 1ZC, 1ZD
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20,6
- Product line: Ceramic
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 66,0
- Height 2 [mm]: 71,3
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0258 / 0195
- Warning Contact Length [mm]: 155
- MAPP code available
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7184.2
- Our price: 65,49 €
- Manufacturer: ATE
- EAN number: 4006633340489
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1LN, 1ZC, 1ZD
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 34,5
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 136,0
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0066
- Bore Diameter [mm]: 15,6
- Item number: 24.0125-0113.1
- Manufacturer: ATE
- EAN number: 4006633295000
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 230,0
- for PR number: 1KK, 1KT, 1KV, 2EJ
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 40,6
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 125,8
- MAPP code available
- Test Mark: E1 90R-02C0859 / 1293
- Bore Diameter [mm]: 15,6
- Item number: 24.0309-0123.1
- Manufacturer: ATE
- EAN number: 4006633204705
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- for PR number: 1LR, 1ZG, 1ZJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 36,7
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- MAPP code available
- Bore Diameter [mm]: 15,6
- Item number: 24.0322-0151.1
- Manufacturer: ATE
- EAN number: 1049633066266
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1LN, 1ZC, 1ZD
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 34,5
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 136,0
- MAPP code available
- Bore Diameter [mm]: 15,6
- Item number: 24.0325-0113.1
- Manufacturer: ATE
- EAN number: 4006633295017
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 310,0
- for PR number: 1ZP, 1ZR
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 34,4
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 133,8
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0858 / 1214
- Bore Diameter [mm]: 15,6
- Item number: 24.0325-0123.1
- Manufacturer: ATE
- EAN number: 4006633040822
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake System: ATE
- Brake Disc Type: internally vented
- Drilled: no
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Item number: A1461V
- Manufacturer: LPR
- EAN number: 8032532068687
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 2EJ
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 27,49 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
- Fitting Position: Front Axle
- Brake System: Volkswagen
- for PR number: 1ZG, 1LR, 1ZJ
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,6
- Quantity Unit: Axle Set
- Height [mm]: 54,7
- Width [mm]: 146,0
- Test Mark: E1 90R-02A0335 / 0211
- MAPP code available
- Item number: 13.0460-7111.2
- Our price: 38,99 €
- Manufacturer: ATE
- EAN number: 4006633302050
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- for PR number: 1LN, 1ZC, 1ZD
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20,6
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height 1 [mm]: 66,0
- Height 2 [mm]: 71,3
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0334 / 0194
- Warning Contact Length [mm]: 155
- MAPP code available
- Item number: 13.0460-7184.2
- Our price: 46,49 €
- Manufacturer: ATE
- EAN number: 4006633118033
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 2EJ
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2894.2
- Our price: 36,99 €
- Manufacturer: ATE
- EAN number: 4006633339629
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Diameter [mm]: 230,0
- for PR number: 1KK, 1KT, 1KV, 2EJ
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 40,6
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 125,8
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0960
- Bore Diameter [mm]: 15,6
- Item number: 24.0109-0123.1
- Manufacturer: ATE
- EAN number: 4006633297707
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- for PR number: 1LR, 1ZG, 1ZJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 36,7
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 133,5
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0141
- Bore Diameter [mm]: 15,6
- Item number: 24.0122-0151.1
- Manufacturer: ATE
- EAN number: 4006633298216
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 310,0
- for PR number: 1ZP, 1ZR
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 34,4
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 133,8
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Diameter [mm]: 15,6
- Item number: 24.0125-0123.1
- Manufacturer: ATE
- EAN number: 4006633069236
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Oiled
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- TecDoc Engine Number: CBZB
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,7
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 19
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,7
- Item number: 0 986 478 988
- Manufacturer: BOSCH
- EAN number: 4047024095861
- Condition: New
price incl. 19% VAT
excl. delivery costs