VAUXHALL Astra Mk4 (G) Estate (T98) 1.8 16V Dualfuel Switch, clutch control (125 hp Petrol/Liquified Petroleum Gas (LPG) Z 18 XE)

- Number of pins: 2
- Item number: 48754
- Our price: 13,71 €
- Manufacturer: OSSCA
- EAN number: 6915093487543
- Condition: New
-
- Vehicle Equipment: for vehicles with cruise control
- Vehicle Identification Number (VIN) from: 38000001, 3B000001, 32000466, 4G000001, 35000001, 36000001
- Number of pins: 2
- Connector Shape: angular
- Operating Mode: Mechanical
- Item number: 207 819
- Our price: 10,98 €
- Manufacturer: TOPRAN
- EAN number: 6239120000018
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
-
- Vehicle Equipment: for vehicles with cruise control
- Vehicle Identification Number (VIN) from: 38000001, 32000466, 3B000001, 35000001, 4G000001, 36000001
- Number of pins: 2
- Housing Colour: grey
- Fitting Position: Footwell
- Operating Mode: Mechanical
- Weight [kg]: 0,011
- Packaging height [cm]: 6,7
- Packaging Depth [cm]: 6,8
- Item number: V40-73-0068
- Our price: 12,49 €
- Manufacturer: VEMO
- EAN number: 4046001853920
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Diameter [mm]: 11 x 17, 15 x 17, 16.5 x 17, 17 x 17, 19 x 17, 20 x 17, 20.5 x 17, 25 x 17
- Quantity Unit: Set
- Packaging: Plastic Cassette
- Item number: WT-2097
- Our price: 24,35 €
- Manufacturer: Weber Tools
- EAN number: 8719558502387
- Condition: New
- Number of Parts [parts]: 1
- Suitable for vehicle type: PC (passenger car)
- Net Weight [g]: 200
- Total Length [mm]: 115
- Outer Diameter 2 [mm]: 15
- Drive [mm]: 13
- Diameter [mm]: 26,5
- Item number: KL-0500-15
- Our price: 34,11 €
- Manufacturer: GEDORE
- EAN number: 4046459094623
- Condition: New
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Drilled: no
- Item number: BG3405
- Manufacturer: DELPHI
- EAN number: 5012759086506
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Fitting Position: Front Axle
- Height [mm]: 41
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Drilled: no
- Item number: BDC4813
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604872
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0333 / 0253, E9 90R-02A1163 / 1231
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Item number: 13.0460-2868.2
- Our price: 31,94 €
- Manufacturer: ATE
- EAN number: 4006633104135
- Condition: New
-
- Braking / Drive Dynamics: for vehicles with ABS
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Height 1 [mm]: 71,4
- Height 2 [mm]: 78,5
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 20,2
- Thickness 2 [mm]: 19,6
- Test Mark: E1 90R-01795 / 608
- MAPP code available
- Article number of recommended accessories: 24.8190-0718.2
- Observe dimensions
- Item number: 13.0460-7116.2
- Our price: 34,53 €
- Manufacturer: ATE
- EAN number: 4006633069540
- Condition: New
-
- Braking / Drive Dynamics: for vehicles without ABS
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Product line: Ceramic
- Height 1 [mm]: 63,0
- Height 2 [mm]: 62,0
- Width 2 [mm]: 177,6
- Width 1 [mm]: 160,0
- Thickness 1 [mm]: 17,5
- Thickness 2 [mm]: 18,5
- Test Mark: E1 90R-02A0258 / 0252
- MAPP code available
- Article number of recommended accessories: 24.8190-0718.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7115.2
- Our price: 49,15 €
- Manufacturer: ATE
- EAN number: 4006633130783
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0967 / 2594
- Drilled: no
- Item number: BG3403
- Manufacturer: DELPHI
- EAN number: 5012759086483
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles without ABS
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 24
- Height [mm]: 41
- Surface: Oiled
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 21
- Test Mark: E1 90R-02C0277 / 1786
- Drilled: no
- Item number: BG3404
- Manufacturer: DELPHI
- EAN number: 5012759086490
- Condition: New
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 42
- Surface: Oiled
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E4 90R-02C0747 / 2816
- Drilled: no
- Item number: BG3406
- Manufacturer: DELPHI
- EAN number: 5012759086513
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 24,8
- Fitting Position: Front Axle
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 14,2
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Braking / Drive Dynamics: for vehicles with ABS
- Required quantity: 2
- Drilled: no
- Item number: 615 521 6017
- Manufacturer: MEYLE
- EAN number: 4040074331767
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 110
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC4814
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604889
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 240
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 43
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4815
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604896
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Diameter [mm]: 264
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 43
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Drilled: no
- Item number: BDC4816
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593604902
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Bosch
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 16,5
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,7
- Width [mm]: 104,6
- Test Mark: E1 90R-01326 / 452
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-3976.2
- Our price: 29,89 €
- Manufacturer: ATE
- EAN number: 4006633057660
- Condition: New
-
- Braking / Drive Dynamics: for vehicles without ABS
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: without integrated wear warning contact, with acoustic wear warning
- Height 1 [mm]: 63,0
- Height 2 [mm]: 62,0
- Width 2 [mm]: 177,6
- Width 1 [mm]: 160,0
- Thickness 1 [mm]: 17,5
- Thickness 2 [mm]: 18,5
- Test Mark: E1 90R-02A0325 / 0210
- MAPP code available
- Article number of recommended accessories: 24.8190-0018.2, 24.8190-0718.2
- Observe dimensions
- Item number: 13.0460-7115.2
- Our price: 38,15 €
- Manufacturer: ATE
- EAN number: 4006633069533
- Condition: New
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 15,3
- Product line: Ceramic
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 42,8
- Width [mm]: 95,3
- Test Mark: E1 90R-02A0258 / 0226
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Number of bolts / screws: 4
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2868.2
- Our price: 42,77 €
- Manufacturer: ATE
- EAN number: 4006633346429
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.