Polo 6 1.6 TDI Suspension kit, coil springs / shock absorbers (95 hp Diesel DGTD)

"The minimum clearance between tires and suspension/body incl. DCC Lowering beyond the dimensions given in the type approval Note DCC: The installation of this suspension into cars Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not workshop. The signal of the electronic damping adjustment covered by H&R." in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

Note DCC: The installation of this suspension into cars Please note additional information and vehicle-specific With and without adaptive suspension. For dynamic-and/or sport-suspension. Except bad road suspension technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) workshop. The signal of the electronic damping adjustment in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).