VW Polo 86 1.3 Suspension kit, coil springs / shock absorbers (60 hp Petrol HH)

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific Vehicles fitted with BMW M-Technic, MB-Sportsline, Audi and Sportsuspension etc. will show less lowering as they are technical notes! already factory lowered. dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and technical notes! dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

"The minimum clearance between tires and suspension/body 23.) Send in front strut housings without wheel bearings, 42.) In the case of ordering complete struts, these are Lowering beyond the dimensions given in the type approval Please note additional information and vehicle-specific ABS may result in damage. These damages are not covered by H&R. only for parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! brackets, cartridges etc. Damaged strut housings will be Polo B. However, they can also be used for Polo A. to be restored with wheel spacers or reworking either rejected or repaired for Send in Polo B struts only to get back deposit. thebodywork. This bodywork and/or arising costs are not covered by H&R." extra charge if possible. In case of in advance delivery by H&R a desposit between 244 and 1200,- € per strut will be required.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.