Passat B6 2.0 TDI 16V Suspension kit, coil springs / shock absorbers (140 hp Diesel BKP)

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Not for cars with electronic damper control. Only for cars without self-levelling Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific technical notes!