Vehicle identification number: 0603ANS
Golf Plus 1.4 TSI Suspension kit, coil springs / shock absorbers (160 hp Petrol CNWA)
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Shock Absorber Design: Telescopic Shock Absorber
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Item number: 1185S0012
- Our price: 85,35 €
- Manufacturer: RIDEX
- EAN number: 4064138557078
- Condition: New
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin, Bottom Plate
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Bearing Type: Rolling Bearing
- Quantity Unit: Set
- Item number: 1185S0052
- Our price: 100,24 €
- Manufacturer: RIDEX
- EAN number: 4066016833311
- Condition: New
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Quantity Unit: Set
- Shock Absorber Mounting Type: Top pin
- Item number: 1185S0011
- Our price: 114,29 €
- Manufacturer: RIDEX
- EAN number: 4064138557016
- Condition: New
-
- Suspension: for vehicles without electronic suspension control
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Axle Load front axle to [kg]: 1020
-
- Lowered Suspension [mm]: 35
- Axle Load front axle to [kg]: 1020
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-3
- Our price: 645,05 €
- Manufacturer: H&R
- EAN number: 4048419070432
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Axle Load front axle from [kg]: 1021
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Lowered Suspension [mm]: 35
- Follow installation instructions
- Item number: 40261-4
- Our price: 645,05 €
- Manufacturer: H&R
- EAN number: 4048419070449
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Diameter [mm]: 50
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle from [kg]: 1066
-
- Lowered rear axle [mm]: 40
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-7
- Our price: 655,32 €
- Manufacturer: H&R
- EAN number: 4048419059437
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Diameter [mm]: 50
-
- Registration Type: with TÜV® certificate
-
- Lowered Suspension to [mm]: 50
-
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 40260-2
- Our price: 655,32 €
- Manufacturer: H&R
- EAN number: 4048419070401
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Axle Load front axle from [kg]: 1021
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Lowered Suspension [mm]: 35
- Fitting Position: Front Axle, Rear Axle
- Axle Load front axle from [kg]: 1021
- Suspension Strut Outer Diameter [mm]: 55
- Lowered Suspension ca. [mm]: 35
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P, 5P, 1Z, 1K, 1KP, 1KM
- Quantity Unit: Kit
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-2
- Our price: 657,83 €
- Manufacturer: H&R
- EAN number: 4048419070425
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Lowered rear axle [mm]: 40
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Diameter [mm]: 55
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle to [kg]: 1065
-
- Lowered front axle [mm]: 55
- Fitting Position: Front Axle, Rear Axle
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P+8PA, 5P+5PN, 5P, 1Z, 1F, 1K, 1KP, 1KM, 3C, 3CC, 3c
- Quantity Unit: Set
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-2
- Our price: 659,08 €
- Manufacturer: H&R
- EAN number: 4048419059383
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Diameter [mm]: 55
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle from [kg]: 1066
-
- Lowered rear axle [mm]: 40
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-3
- Our price: 659,08 €
- Manufacturer: H&R
- EAN number: 4048419059390
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Diameter [mm]: 50
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle to [kg]: 1065
-
- Lowered rear axle [mm]: 40
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-6
- Our price: 659,08 €
- Manufacturer: H&R
- EAN number: 4048419059420
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Diameter [mm]: 55
-
- Registration Type: with TÜV® certificate
-
- Lowered Suspension to [mm]: 50
-
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 40260-1
- Our price: 659,08 €
- Manufacturer: H&R
- EAN number: 4048419070395
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Axle Load front axle to [kg]: 1020
-
- Lowered Suspension [mm]: 35
- Axle Load front axle to [kg]: 1020
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-1
- Our price: 659,08 €
- Manufacturer: H&R
- EAN number: 4048419070418
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Construction Year from: 07 / 2009
- Construction Year to: 06 / 2013
- Axle Load front axle to [kg]: 980
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ030
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Item number: 1140-0080
- Our price: 843,02 €
- Manufacturer: KONI
- EAN number: 8712167133010
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Construction Year from: 07 / 2009
- Construction Year to: 06 / 2013
- Axle Load front axle from [kg]: 981
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ031
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Item number: 1140-0081
- Our price: 843,02 €
- Manufacturer: KONI
- EAN number: 8712167133027
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Construction Year from: 07 / 2009
- Construction Year to: 06 / 2013
- Axle Load front axle from [kg]: 1021
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ032
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Item number: 1140-0082
- Our price: 843,02 €
- Manufacturer: KONI
- EAN number: 8712167133034
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Construction Year from: 07 / 2009
- Construction Year to: 06 / 2013
- Axle Load front axle to [kg]: 980
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ035
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 50
- Item number: 1140-0085
- Our price: 843,02 €
- Manufacturer: KONI
- EAN number: 8712167133065
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Construction Year from: 07 / 2009
- Construction Year to: 06 / 2013
- Axle Load front axle from [kg]: 981
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ036
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 50
- Item number: 1140-0086
- Our price: 843,02 €
- Manufacturer: KONI
- EAN number: 8712167133072
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Construction Year from: 07 / 2009
- Construction Year to: 06 / 2013
- Axle Load front axle from [kg]: 1021
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ037
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 50
- Item number: 1140-0087
- Our price: 843,02 €
- Manufacturer: KONI
- EAN number: 8712167133089
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- not for vehicle configuration line / variant: Cross
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ058
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Item number: 1140-2611
- Our price: 857,94 €
- Manufacturer: KONI
- EAN number: 8712167134451
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- 1
- 2
- 3
- 4
- 5