Toyota Yaris xp13 1.5 Hybrid Suspension kit, coil springs / shock absorbers (101 hp Petrol/Electric 1NZ-FXE)

- Length [mm]: 377, 622
- Shock Absorber Mounting Type: Bottom eye, Top pin
- Item number: MNE1185N0250
- Our price: 101,49 €
- Manufacturer: MONROE
- EAN number: MNE1185N0250
- Condition: New

- Length [mm]: 392, 546
- Shock Absorber Mounting Type: Top pin, Bottom Clamp
- Item number: MNE1185N0342
- Our price: 188,99 €
- Manufacturer: MONROE
- EAN number: MNE1185N0342
- Condition: New
- Fitting Position: Front Axle
-
- Axle Load [kg] to: 825
- Lowered Suspension ca. [mm]: 20-40
-
- Axle Load [kg] to: 895
- Lowered Suspension ca. [mm]: 20-40
- Product line: - B14 PSS
- Shock Absorber System: Twin-Tube
- Shock Absorber Type: Gas Pressure
- Suspension: Threaded Suspension (height adjustable), for vehicles without electronic suspension control
- Registration Type: Conditions see certificate
- Item number: 47-237834
- Our price: 755,50 €
- Manufacturer: BILSTEIN
- EAN number: 4025258752064
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
-
- Axle Load [kg] to: 895
- for PR number: P13, P9
- Lowered Suspension ca. [mm]: 45-55
-
- Axle Load [kg] to: 825
- Lowered Suspension ca. [mm]: 35-55
-
- Shock Absorber System: Monotube
- Registration Type: Conditions see certificate
- Product line: - B14 PSS
- Shock Absorber Type: Gas Pressure
- Item number: 47-188044
- Our price: 1025,00 €
- Manufacturer: BILSTEIN
- EAN number: 4025258664145
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year from: 03 / 2013
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 17,8
- Quantity Unit: Axle Set
- Height [mm]: 58,3
- Width [mm]: 151,4
- Vehicle Production Country: France
- Item number: 6870
- Our price: 21,99 €
- Manufacturer: MAPCO
- EAN number: 4043605455741
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Thickness [mm]: 15
- Quantity Unit: Axle Set
- Height [mm]: 43,8
- Width [mm]: 123
- Braking / Drive Dynamics: for vehicles with ESP
- Item number: 6871
- Our price: 23,99 €
- Manufacturer: MAPCO
- EAN number: 4043605455758
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 24,7
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Inner Diameter [mm]: 147
- Bore Diameter [mm]: 14,3
- Item number: C42053ABE
- Manufacturer: ABE
- EAN number: 5900427203525
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 14,5
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 43,7
- Width [mm]: 123,1
- Number of pads: 4
- Item number: C22038ABE
- Our price: 18,99 €
- Manufacturer: ABE
- EAN number: 5900427192140
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 9
- Height [mm]: 25
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Inner Diameter [mm]: 147
- Hub Diameter [mm]: 55
- No. of holes 1: 2
- Item number: J3312064
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416254247
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 275
- Construction Year to: 01 / 2013
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 22
- Height [mm]: 46,3
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 19
- Test Mark: E1 90R-02C0074 / 1598
- Item number: BG4054
- Manufacturer: DELPHI
- EAN number: 5012759386330
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 9
- Height [mm]: 25
- Centering Diameter [mm]: 55
- Number of Holes: 4
- Minimum thickness [mm]: 7
- Test Mark: E1 90R-02C0967 / 2519
- Item number: BG4076
- Manufacturer: DELPHI
- EAN number: 5012759416594
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 275
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 22
- Height [mm]: 46,5
- Centering Diameter [mm]: 55
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 19
- Brake Disc Hub Height [mm]: 24,5
- Packaging height [cm]: 10
- Packaging Depth [cm]: 28
- Packaging width [cm]: 28
- Item number: V70-80018
- Manufacturer: VAICO
- EAN number: 4046001552205
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Akebono
- Construction Year to: 02 / 2013
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,5
- Quantity Unit: Axle Set
- Height [mm]: 56,1
- Width [mm]: 139,0
- Test Mark: E1 90R-02A0334 / 0605
- MAPP code available
- Article number of recommended accessories: 13.0460-0532.2
- Item number: 13.0460-5767.2
- Our price: 50,99 €
- Manufacturer: ATE
- EAN number: 4006633336185
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Braking / Drive Dynamics: for vehicles with ESP
- Thickness [mm]: 15
- Quantity Unit: Axle Set
- Height [mm]: 43,8
- Width [mm]: 123,0
- Test Mark: E1 90R-02A0333 / 0416
- MAPP code available
- Item number: 13.0460-7214.2
- Our price: 40,99 €
- Manufacturer: ATE
- EAN number: 4006633274821
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 275,0
- Construction Year to: 02 / 2013
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 46,5
- Centering Diameter [mm]: 55,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 19,0
- Inner Diameter [mm]: 131,0
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0233
- Bore Diameter [mm]: 14,5
- Item number: 24.0122-0254.1
- Manufacturer: ATE
- EAN number: 4006633313391
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Braking / Drive Dynamics: for vehicles with ESP
- Brake Disc Thickness [mm]: 9
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Item number: 25235
- Manufacturer: MAPCO
- EAN number: 4043605455895
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 275
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 46,7
- Centering Diameter [mm]: 54,9
- Number of Holes: 4
- Minimum thickness [mm]: 19
- Item number: T2045V
- Manufacturer: LPR
- EAN number: 8032928085281
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 278
- Brake Disc Type: solid
- Drilled: no
- Braking / Drive Dynamics: for vehicles with ESP
- Brake Disc Thickness [mm]: 9
- Height [mm]: 25
- Number of Holes: 4
- Minimum thickness [mm]: 7
- Item number: T2046P
- Manufacturer: LPR
- EAN number: 8032928085298
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: with acoustic wear warning
- Thickness [mm]: 17,8
- Quantity Unit: Axle Set
- Height 1 [mm]: 58,2
- Height 2 [mm]: 61,0
- Width 2 [mm]: 150,1
- Width 1 [mm]: 151,3
- Test Mark: E1 90R-011033 / 862
- MAPP code available
- Item number: 13.0460-7213.2
- Our price: 44,49 €
- Manufacturer: ATE
- EAN number: 4006633270380
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 278,0
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Braking / Drive Dynamics: for vehicles with ESP
- Brake Disc Thickness [mm]: 9,0
- Height [mm]: 24,7
- Centering Diameter [mm]: 55,0
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 147,0
- MAPP code available
- Test Mark: E1 90R-02C0165 / 0469
- Bore Diameter [mm]: 14,3
- Item number: 24.0109-0142.1
- Manufacturer: ATE
- EAN number: 4006633306652
- Condition: New
price incl. 19% VAT
excl. delivery costs