Skoda Octavia 3 2.0 TDI Suspension kit, coil springs / shock absorbers (150 hp Diesel CKFC)

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not workshop. The signal of the electronic damping adjustment covered by H&R." in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not workshop. The signal of the electronic damping adjustment covered by H&R." in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

disconect DCC

Für Fahrzeuge mit Verbundlenker-Hinterachse und 50mm VA Set VA Gewindefederbeine, HA Federn mit Höhenverstellung + Shock absorber without hardness adjustment ST Gewindefahrwerke ST X Die ST X Gewindefahrwerke erlauben Dämpfer durch die stufenlose Gewindeverstellung eine moderate bis Federbeindurchmesser eXtreme Tieferlegung. Basierend auf dem Knowhow von KW, dem Marktführer für individuelle Fahrwerklösungen, überzeugen die ST X Gewindefahrwerke durch ihre Qualität und Fahrdynamik.- Individuelle Tieferlegung innerhalb des TÜV-geprüften Verstellbereichs- VA und HA (sofern technisch möglich) mit Gewindeverstellung- Verzinkte Gewindefederbeine mit zusätzlicher Versiegelung für einen optimierten Korrosionsschutz Komplette Lösung mit Verstellfederteller, Rennsportfedersystem und Anschlagelementen mit Staubschutzsystem Leistungsfähiger 2-Rohr Dämpfer mit hochwertigen Komponenten für eine lange Lebensdauer