Skoda Fabia 6y Saloon 1.4 TDI Suspension kit, coil springs / shock absorbers (75 hp Diesel AMF)

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and technical notes! dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and technical notes! dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

12.) Vehicles fitted with BMW M-Technic, MB-Sportsline, 22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and Audi technical notes! dust cover if not co-packed. Sportsuspension etc. will show less lowering as they are already factory lowered. Check good condition of these items prior to fitment, exchange if in doubt.

12.) Vehicles fitted with BMW M-Technic, MB-Sportsline, 22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and Audi technical notes! dust cover if not co-packed. Sportsuspension etc. will show less lowering as they are already factory lowered. Check good condition of these items prior to fitment, exchange if in doubt.

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

12.) Vehicles fitted with BMW M-Technic, MB-Sportsline, Please note additional information and vehicle-specific Audi technical notes! Sportsuspension etc. will show less lowering as they are already factory lowered.

"The minimum clearance between tires and suspension/body 66.) Before ordering please check the upper front shock Lowering beyond the dimensions given in the type approval Only for cars with front shocks three bolts fixation, not Please note additional information and vehicle-specific fixation, see attached mounting instruction HR01-X104A01.pdf for fixations with one nut. may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."

"The minimum clearance between tires and suspension/body 33.) Please note before purchase: This suspension is a very 66.) Before ordering please check the upper front shock low Version Lowering beyond the dimensions given in the type approval Only for cars with front shocks three bolts fixation, not Only in combination with new H&R sway-bar link and H&R Please note additional information and vehicle-specific fixation, see attached mounting instruction HR01-X104A01.pdf for fixations with one nut. low may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has stabilizer allowed. (Part-No. 33325-1). Set has to be technical notes! ordered separately. to be restored with wheel spacers or reworking version! Customer and/or workshop is responsible for clearance, necessary work thebodywork. This bodywork and/or arising costs are not and/or additional other modifications/changes. covered by H&R." This rework and/or arising cost is not covered by H&R.