Seat Ibiza 6j Estate 1.4 Suspension kit, coil springs / shock absorbers (85 hp Petrol CGGB)

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

disconect DCC

disconect DCC

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Note: Prior in case of ordering check: Please note additional information and vehicle-specific Front top shock absorber fixation to the body with one may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! nut, not for fixations with three bolts. to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Note: Prior in case of ordering check: Please note additional information and vehicle-specific Front top shock absorber fixation to the body with one may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! nut, not for fixations with three bolts. to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."

Performance Height Adjustable Kit Up-side-down system with forceadjustment for rebound and compression