Seat Cordoba 6L2 1.4 TDI Suspension kit, coil springs / shock absorbers (80 hp Diesel BNV)

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and technical notes! dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and technical notes! dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

12.) Vehicles fitted with BMW M-Technic, MB-Sportsline, Please note additional information and vehicle-specific Audi technical notes! Sportsuspension etc. will show less lowering as they are already factory lowered.

"The minimum clearance between tires and suspension/body 33.) Please note before purchase: This suspension is a very 66.) Before ordering please check the upper front shock low Version Lowering beyond the dimensions given in the type approval Only for cars with front shocks three bolts fixation, not Only in combination with new H&R sway-bar link and H&R Please note additional information and vehicle-specific fixation, see attached mounting instruction HR01-X104A01.pdf for fixations with one nut. low may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has stabilizer allowed. (Part-No. 33325-1). Set has to be technical notes! ordered separately. to be restored with wheel spacers or reworking version! Customer and/or workshop is responsible for clearance, necessary work thebodywork. This bodywork and/or arising costs are not and/or additional other modifications/changes. covered by H&R." This rework and/or arising cost is not covered by H&R.

Set VA Gewindefederbeine, HA Federn mit Höhenverstellung + Shock absorber without hardness adjustment ST Gewindefahrwerke ST X Die ST X Gewindefahrwerke erlauben Dämpfer durch die stufenlose Gewindeverstellung eine moderate bis eXtreme Tieferlegung. Basierend auf dem Knowhow von KW, dem Marktführer für individuelle Fahrwerklösungen, überzeugen die ST X Gewindefahrwerke durch ihre Qualität und Fahrdynamik.- Individuelle Tieferlegung innerhalb des TÜV-geprüften Verstellbereichs- VA und HA (sofern technisch möglich) mit Gewindeverstellung- Verzinkte Gewindefederbeine mit zusätzlicher Versiegelung für einen optimierten Korrosionsschutz Komplette Lösung mit Verstellfederteller, Rennsportfedersystem und Anschlagelementen mit Staubschutzsystem Leistungsfähiger 2-Rohr Dämpfer mit hochwertigen Komponenten für eine lange Lebensdauer