Vehicle identification number: 7593ADB
Seat Altea XL 1.8 TFSI Suspension kit, coil springs / shock absorbers (160 hp Petrol CDAA)
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Mounting Type: Top pin, Bottom Plate
- Supplementary Article / Supplementary Info Info 2: with rolling bearing
- Bearing Type: Rolling Bearing
- Quantity Unit: Set
- Item number: 1185S0052
- Our price: 101,90 €
- Manufacturer: RIDEX
- EAN number: 4066016833311
- Condition: New
- Fitting Position: Front Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Quantity Unit: Set
- Shock Absorber Mounting Type: Top pin
- Item number: 1185S0011
- Our price: 116,44 €
- Manufacturer: RIDEX
- EAN number: 4064138557016
- Condition: New
- Lowered rear axle from [mm]: 30
- Fitting Position: Front Axle, Rear Axle
- Lowered rear axle to [mm]: 60
- Lowered front axle to [mm]: 60
- Lowered front axle from [mm]: 20
- Axle Load rear axle to [kg]: 1250
- Axle Load front axle to [kg]: 1105
- Product line: BlueLine
- Shock Absorber System: Height Adjustable
- Shock Absorber Design: Suspension Strut
- Quantity Unit: Set
- Surface: Powder coated
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Item number: 741044
- Our price: 357,75 €
- Manufacturer: JOM
- EAN number: 4048961075428
- Condition: New
- Lowered rear axle from [mm]: 30
- Fitting Position: Front Axle, Rear Axle
- Lowered rear axle to [mm]: 60
- Lowered front axle to [mm]: 60
- Lowered front axle from [mm]: 20
- Axle Load rear axle to [kg]: 1250
- Axle Load front axle to [kg]: 1105
- Product line: NJT eXtrem
- Suspension Strut Outer Diameter [mm]: for 50, 55
- Shock Absorber System: Height Adjustable, Mechanically adjustable shock strength
- Shock Absorber Design: Suspension Strut
- Quantity Unit: Set
- Surface: Galvanically coated
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate
- Follow installation instructions: +
- Item number: 751044
- Our price: 631,25 €
- Manufacturer: JOM
- EAN number: 4048961090445
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Axle Load front axle to [kg]: 1020
-
- Lowered Suspension [mm]: 35
- Axle Load front axle to [kg]: 1020
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-3
- Our price: 661,60 €
- Manufacturer: H&R
- EAN number: 4048419070432
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Axle Load front axle from [kg]: 1021
-
- Lowered Suspension [mm]: 35
- Axle Load front axle from [kg]: 1021
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-4
- Our price: 661,60 €
- Manufacturer: H&R
- EAN number: 4048419070449
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Pipe Diameter [mm]: 50
-
- Registration Type: with TÜV® certificate
-
- Lowered Suspension to [mm]: 50
-
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 40260-2
- Our price: 668,30 €
- Manufacturer: H&R
- EAN number: 4048419070401
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Pipe Diameter [mm]: 55
-
- Registration Type: with TÜV® certificate
-
- Lowered Suspension to [mm]: 50
-
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 40260-1
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419070395
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Construction Year from: 01 / 2007
-
- Axle Load front axle to [kg]: 1020
-
- Lowered Suspension [mm]: 35
- Axle Load front axle to [kg]: 1020
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-1
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419070418
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Axle Load front axle from [kg]: 1021
-
- Lowered Suspension [mm]: 35
- Fitting Position: Front Axle, Rear Axle
- Axle Load front axle from [kg]: 1021
- Suspension Strut Outer Diameter [mm]: 55
- Lowered Suspension ca. [mm]: 35
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P, 5P, 1Z, 1K, 1KP, 1KM
- Quantity Unit: Kit
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Item number: 40261-2
- Our price: 674,73 €
- Manufacturer: H&R
- EAN number: 4048419070425
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- not for vehicle configuration line / variant: Freetrack
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ058
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Item number: 1140-2611
- Our price: 874,93 €
- Manufacturer: KONI
- EAN number: 8712167134451
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- not for vehicle configuration line / variant: Freetrack
- Axle Load front axle from [kg]: 1021
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ059
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Item number: 1140-2612
- Our price: 874,93 €
- Manufacturer: KONI
- EAN number: 8712167134468
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- not for vehicle configuration line / variant: Freetrack
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- Fitting Position: Rear Axle, Front Axle
- for RPO number: DQ061
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 50
- Item number: 1140-2614
- Our price: 874,93 €
- Manufacturer: KONI
- EAN number: 8712167134482
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Vehicle Equipment: for vehicles without level control
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate
- Axle Load rear axle to [kg]: 1050
- Axle Load front axle to [kg]: 1120
- Product line: B12 Pro-Kit
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Item number: E90-81-007-06-22
- Our price: 935,23 €
- Manufacturer: EIBACH
- EAN number: 4050278033398
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20-45
-
- Observe service information
- Axle Load front axle to [kg]: 1035
- Axle Load rear axle to [kg]: 1150
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-014-01-22
- Our price: 967,99 €
- Manufacturer: EIBACH
- EAN number: 4050278018364
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 20-45
-
- Observe service information
- Axle Load front axle to [kg]: 1035
- Axle Load rear axle to [kg]: 1150
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 50
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-014-02-22
- Our price: 967,99 €
- Manufacturer: EIBACH
- EAN number: 4050278018371
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-55
-
- Observe service information
- Axle Load front axle to [kg]: 1105
- Axle Load rear axle to [kg]: 1150
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-014-03-22
- Our price: 967,99 €
- Manufacturer: EIBACH
- EAN number: 4050278018388
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-55
-
- Observe service information
- Axle Load front axle to [kg]: 1105
- Axle Load rear axle to [kg]: 1150
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 50
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-014-04-22
- Our price: 967,99 €
- Manufacturer: EIBACH
- EAN number: 4050278018395
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-55
-
- Observe service information
- Axle Load front axle to [kg]: 1170
- Axle Load rear axle to [kg]: 1150
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-014-05-22
- Our price: 967,99 €
- Manufacturer: EIBACH
- EAN number: 4050278018401
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30-60
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 25-55
-
- Observe service information
- Axle Load front axle to [kg]: 1170
- Axle Load rear axle to [kg]: 1150
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 50
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-014-06-22
- Our price: 967,99 €
- Manufacturer: EIBACH
- EAN number: 4050278018418
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- 1
- 2
- 3
- 4