OPEL Kadett E Saloon (T85) 1.3 N Suspension kit, coil springs / shock absorbers (60 hp Petrol 13 N)

"The minimum clearance between tires and suspension/body 23.) Send in front strut housings without wheel bearings, 41.) In the case of ordering complete struts these are only Height adjustable at the front axle only Lowering beyond the dimensions given in the type approval Please note additional information and vehicle-specific Wheel bearing diameter FA 64/66/72 mm? With or without ABS? ABS for may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! 2.0 L 16 V, with wheel bearings dia. 72 mm and ABS brackets, cartridges etc. Damaged strut housings will be to be restored with wheel spacers or reworking brackets. Vehicles with bigger or either rejected or repaired for thebodywork. This bodywork and/or arising costs are not covered by H&R." extra charge if possible. In case of in advance delivery smaller wheel bearings (i.E. wheel bearing dia. 64 mm, 66 by H&R a desposit between 244 and 1200,- € per strut will mm, 74 mm) struts have to be sent in in advance. be required.

"The minimum clearance between tires and suspension/body 23.) Send in front strut housings without wheel bearings, 41.) In the case of ordering complete struts these are only Lowering beyond the dimensions given in the type approval Please note additional information and vehicle-specific RA hight ajustable ABS for may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! 2.0 L 16 V, with wheel bearings dia. 72 mm and ABS brackets, cartridges etc. Damaged strut housings will be to be restored with wheel spacers or reworking brackets. Vehicles with bigger or either rejected or repaired for thebodywork. This bodywork and/or arising costs are not covered by H&R." extra charge if possible. In case of in advance delivery smaller wheel bearings (i.E. wheel bearing dia. 64 mm, 66 by H&R a desposit between 244 and 1200,- € per strut will mm, 74 mm) struts have to be sent in in advance. be required.

For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.

For maximum performance in wet conditions, Brembo Max is the affordable grooved and painted disc for the enthusiast.