Audi A3 Saloon 1.5 TFSI Suspension kit, coil springs / shock absorbers (150 hp Petrol DADA)

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm and with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm and with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).

disconect AMM disconect DCC

disconect AMM

disconect AMM

disconect AMM

disconect AMM

disconect AMM disconect DCC

disconect AMM disconect DCC

disconect AMM disconect DCC

disconect AMM disconect DCC

disconect AMM disconect DCC

disconect AMM disconect DCC

disconect AMM disconect DCC

"The minimum clearance between tires and suspension/body 33.) Please note before purchase: This suspension is a very Lowering beyond the dimensions given in the type approval Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific low may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) to be restored with wheel spacers or reworking version! Customer and/or workshop is responsible for clearance, necessary work thebodywork. This bodywork and/or arising costs are not workshop. The signal of the electronic damping adjustment and/or additional other modifications/changes. covered by H&R." in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are This rework and/or arising cost is not covered by H&R. connected to the valve connectors of the front and rear damping adjustment).

"The minimum clearance between tires and suspension/body 33.) Please note before purchase: This suspension is a very Lowering beyond the dimensions given in the type approval Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific low may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) to be restored with wheel spacers or reworking version! Customer and/or workshop is responsible for clearance, necessary work thebodywork. This bodywork and/or arising costs are not workshop. The signal of the electronic damping adjustment and/or additional other modifications/changes. covered by H&R." in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are This rework and/or arising cost is not covered by H&R. connected to the valve connectors of the front and rear damping adjustment).

"The minimum clearance between tires and suspension/body 33.) Please note before purchase: This suspension is a very Lowering beyond the dimensions given in the type approval Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific low may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! with an electronic damping adjustment (DCC , Magnetic Ride etc.) must be done in an authorized (Audi - , VW-, etc.) to be restored with wheel spacers or reworking version! Customer and/or workshop is responsible for clearance, necessary work thebodywork. This bodywork and/or arising costs are not workshop. The signal of the electronic damping adjustment and/or additional other modifications/changes. covered by H&R." in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are This rework and/or arising cost is not covered by H&R. connected to the valve connectors of the front and rear damping adjustment).