Audi 80 B3 1.4 Suspension kit, coil springs / shock absorbers (65 hp Petrol SE)

Please note additional information and vehicle-specific technical notes!

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and technical notes! dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

23.) Send in front strut housings without wheel bearings, 45.) In case of ordering complete struts we need additional Please note additional information and vehicle-specific The OE front strut housings have to be sent in advance. ABS information: technical notes! a) struts "with" or "without" stabilizer holder brackets, cartridges etc. Damaged strut housings will be b) bore diameter at the brackets: 12 mm or 14 mm either rejected or repaired for extra charge if possible. In case of in advance delivery by H&R a desposit between 244 and 1200,- € per strut will be required.

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval M12 screws at the shock absorber. Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval M14 screws at the shock absorber. Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."