Audi 80 B3 1.6 Suspension kit, coil springs / shock absorbers (75 hp Petrol RN)

Please note additional information and vehicle-specific technical notes!

22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Please note additional information and vehicle-specific and technical notes! dust cover if not co-packed. Check good condition of these items prior to fitment, exchange if in doubt.

Set (VA+HA)

23.) Send in front strut housings without wheel bearings, 45.) In case of ordering complete struts we need additional Please note additional information and vehicle-specific The OE front strut housings have to be sent in advance. ABS information: technical notes! a) struts "with" or "without" stabilizer holder brackets, cartridges etc. Damaged strut housings will be b) bore diameter at the brackets: 12 mm or 14 mm either rejected or repaired for extra charge if possible. In case of in advance delivery by H&R a desposit between 244 and 1200,- € per strut will be required.

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval M12 screws at the shock absorber. Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval M14 screws at the shock absorber. Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."