W213 E 220 d 2.0 4-matic Suspension kit, coil springs (163 hp Diesel OM 654.920)

"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Please note additional information and vehicle-specific may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."

Different chamfers on the leading and trailing edges of the MEYLE-PD brake pads have a very short brake-in time, to brake pads support the silent performance of MEYLE-PD. ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the To ensure this silent performance, slotting and chamfer are individually designed for each brake pad. pad or are treated with scorching technology.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.