Audi A3 8V Sportback RS3 2.5 quattro Suspension kit, coil springs (400 hp Petrol DNWA)
-
- Vehicle configuration line / variant: Heavy duty set
- Registration Type: with TÜV® certificate
- Weight [kg]: 1,95
- Mounting Time [min]: 45
- Item number: HV-199545
- Our price: 162,49 €
- Manufacturer: MAD
- EAN number: 8717947072022
- Condition: New
Auxiliary spring fitting inside the main spring
price incl. 19% VAT
- Fitting Position: Front Axle
-
- Lowered Suspension ca. [mm]: 10
- Axle Load rear axle to [kg]: 1085
-
- Lowered Suspension ca. [mm]: 10
- Axle Load front axle to [kg]: 1100
-
- Observe service information
- Registration Type: with General Operating Permit (ABE)
- Suspension: for vehicles with sports suspension
- Product line: Pro-Kit
- Suspension: for all standard damping systems
- Vehicle Equipment: for vehicles without level control
- Axle: Multi-link Axle
- Item number: E10-15-021-13-22
- Our price: 235,00 €
- Manufacturer: EIBACH
- EAN number: 4050278041911
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
-
- Lowered Suspension ca. [mm]: 15
- Axle Load rear axle to [kg]: 1080
-
- Lowered Suspension ca. [mm]: 25
- Axle Load front axle to [kg]: 1100
-
- Observe service information
- Registration Type: with General Operating Permit (ABE)
- Suspension: for vehicles with sports suspension
- Product line: Sportline
- Suspension: for all standard damping systems
- Vehicle Equipment: for vehicles without level control
- Axle: Multi-link Axle
- Item number: E20-15-021-06-22
- Our price: 252,00 €
- Manufacturer: EIBACH
- EAN number: 4050278043069
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- Vehicle Equipment: for vehicles without drive-select
- Lowered rear axle [mm]: 20, 20 with MRC, 30 without MRC
- Braking / Drive Dynamics: for vehicles without Magnetic Ride
- Lowered front axle [mm]: 30, 30 with MRC, 40 without MRC
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Quantity Unit: Set
- Vehicle type: 8V
- Spring Design: Coil Spring
- Colour: blue
- for components see parts list
- Item number: 28810-3
- Our price: 246,00 €
- Manufacturer: H&R
- EAN number: 4048419271822
- Condition: New
12.) Vehicles fitted with BMW M-Technic, MB-Sportsline, Please note additional information and vehicle-specific With and without adaptive suspension. For dynamic-and/or Audi sport-suspension. Except bad road suspension technical notes! Sportsuspension etc. will show less lowering as they are already factory lowered.
price incl. 19% VAT
-
- Lowered front axle from [mm]: 10
- Lowered front axle to [mm]: 30
- Lowered rear axle from [mm]: 10
- Lowered rear axle to [mm]: 30
- Follow installation instructions
- Registration Type: with TÜV® certificate
- for components see parts list
- Item number: 23018-5
- Our price: 772,50 €
- Manufacturer: H&R
- EAN number: 4048419301376
- Condition: New
"The minimum clearance between tires and suspension/body Lowering beyond the dimensions given in the type approval Please note additional information and vehicle-specific With and without adaptive suspension. For dynamic-and/or may result in damage. These damages are not covered by H&R. parts is 5 mm. If the clearance is less than 5 mm, it has sport-suspension. Except bad road suspension technical notes! to be restored with wheel spacers or reworking thebodywork. This bodywork and/or arising costs are not covered by H&R."
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Thread Size: 15,5
- Item number: C4W014ABE
- Manufacturer: ABE
- EAN number: 5900427206786
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,4
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Item number: BDC5628
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438159059
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 2EE, 1KX
- Brake Disc Type: Externally Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Braking System: not for carbon-ceramic brake discs
- Product line: COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 6,8
- Test Mark: ECE R90 APPROVED
- Item number: 100.3309.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238718208
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KX, 2EE
- Brake Disc Type: Externally Vented, Perforated
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Braking System: for vehicles without ceramic brakes
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 22
- Height [mm]: 49
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Hole Arrangement / Number: 10 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 6,8
- Test Mark: ECE R90 APPROVED
- Item number: 100.3309.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238749301
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Drilled: no
- Surface: Painted
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Thread Size: 15,5
- Colour: black
- Test Mark: E190R-02C0185 / 0588
- Item number: DF4754
- Manufacturer: TRW
- EAN number: 3322937546220
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KX, 2EE
- Brake Disc Type: Vented
- Drilled: no
- Vehicle Equipment: for vehicles with electric parking brake
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Weight [kg]: 7,909
- No. of holes 2: 9
- Brake Disc Hub Height [mm]: 46,2
- Packaging width [cm]: 32
- Packaging height [cm]: 10
- Packaging Depth [cm]: 32
- Item number: V10-80084
- Manufacturer: VAICO
- EAN number: 4046001349461
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 340,0
- for PR number: 1LH, 1LU, 1LN, 1LL
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 30,0
- Height [mm]: 49,6
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 27,0
- Inner Diameter [mm]: 145,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 0407
- Bore Diameter [mm]: 15,3
- Item number: 24.0130-0225.1
- Manufacturer: ATE
- EAN number: 4006633383226
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 288
- for PR number: 1ZE,1ZP
- Brake Disc Type: Vented
- Drilled: no
- Surface: Uncoated
- Machining: Untreated
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Brake Disc Thickness [mm]: 24,9
- Height [mm]: 49,9
- Material: Cast Iron
- Centering Diameter [mm]: 65
- Number of Holes: 5 / 10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- usable for vehicles to construction year: 2016 / 11
- Item number: SKAD-2027
- Manufacturer: STARK
- EAN number: 4059191001064
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Drilled: no
- for combined PR number: 1KX+2EE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169
- Bore Diameter [mm]: 15,3
- Item number: 25842
- Manufacturer: MAPCO
- EAN number: 4043605445797
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 2EE, 1KX
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0289 / 1665
- Item number: BG3975
- Manufacturer: DELPHI
- EAN number: 5012759370155
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- for PR number: 1KX, 2EE
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Vehicle Equipment: for vehicles with electric parking brake
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KX, 2EE
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Bore Diameter up to [mm]: 15,3
- fulfils ECE norm: ECE-R90
- Item number: 0 986 479 303
- Manufacturer: BOSCH
- EAN number: 4047024233768
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 2EE, 1KX
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Tightening Torque [Nm]: 120
- Item number: 09.A200.11
- Manufacturer: BREMBO
- EAN number: 8020584025598
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KX, 2EE
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Vehicle Equipment: for vehicles with electric parking brake
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 5 / 10
- Minimum thickness [mm]: 20
- Item number: BS-8044C
- Manufacturer: OPTIMAL
- EAN number: 4031185488396
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- for PR number: 1KX, 2EE
- Brake Disc Type: Externally Vented
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: without wheel hub, without wheel bearing, without wheel studs
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Centering Diameter [mm]: 65
- Hole Arrangement / Number: 05 / 10
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Inner Diameter [mm]: 169,4
- Weight [kg]: 7
- Packaging length [cm]: 32,8
- Packaging width [cm]: 32,8
- Packaging height [cm]: 12,5
- Item number: 92140700
- Manufacturer: TEXTAR
- EAN number: 4019722274688
- Condition: New
price incl. 19% VAT
excl. delivery costs