NISSAN Vanette Cargo Van (HC23) 1.6 Ball joint (102 hp Petrol GA16DE)
- Fitting Position: Lower Front Axle
-
- Construction Year from: 09 / 1997
- Transmission Type: Manual Transmission
- for model code: C23
- Bore Diameter [mm]: 38
- Packaging length [cm]: 8,6
- Packaging width [cm]: 4,5
- Packaging height [cm]: 4,5
- Item number: 0220-W11
- Manufacturer: FEBEST
- EAN number: 4056111024219
- Condition: New
- Fitting Position: Front Axle Right, outer, Lower
- Vehicle type: Vanette E
- Cone Size [mm]: 14,9
- Weight [kg]: 0,785
- Thread Size 1: M14X1.5 RHT
- Paired product: 220358
- Item number: 220359
- Manufacturer: A.B.S.
- EAN number: 8717109338706
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Lower, Front Axle Left
- Paired product: V38-9527
- Packaging width [cm]: 13
- Packaging height [cm]: 9,5
- Packaging Depth [cm]: 7
- Item number: A38-9529
- Manufacturer: ACKOJA
- EAN number: 4062375083435
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left, outer, Lower
- Paired product: TC1186
- Thread Size: M14x1.5
- Length [mm]: 120
- Height [mm]: 80
- Width [mm]: 90
- Item number: TC1185
- Manufacturer: DELPHI
- EAN number: 5012759287804
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Lower
- Cone Size [mm]: 14,8
- Supplementary Article / Supplementary Info: with crown nut and split pin
- Weight [kg]: 0,77
- Paired product: 42648
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Mounting points diameter [mm]: 12,5
- Observe service information
- External Thread Size: M14 x 1,5
- Item number: 42649
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816426493
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Right, outer, Lower
- Paired product: TC1185
- Thread Size: M14x1.5
- Length [mm]: 110
- Height [mm]: 95
- Width [mm]: 70
- Item number: TC1186
- Manufacturer: DELPHI
- EAN number: 5012759287811
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Lower
- Cone Size [mm]: 14,8
- Supplementary Article / Supplementary Info: with crown nut and split pin
- Weight [kg]: 0,620
- Paired product: ADN18648
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with bolts / screws, with crown nut
- Mounting points diameter [mm]: 12,5
- External Thread Size: M14 x 1,5
- Item number: ADN18649
- Manufacturer: BLUE PRINT
- EAN number: 5050063186499
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Right
- Paired product: 825 0301 10
- Item number: 825 0302 10
- Manufacturer: FAG
- EAN number: 4014870414535
- Condition: New
- Fitting Position: Front Axle, Front Axle Left, Lower
- Cone Size [mm]: 18,9
- Thread Size: M14X1.5
- Length [mm]: 63,5
- Paired product: NI-BJ-5200
- Height [mm]: 27
- Mounting Type: Bolted
- Packing Type: Box
- Packaging length [cm]: 11,5
- Packaging width [cm]: 11,5
- Packaging height [cm]: 15
- Item number: NI-BJ-5199
- Manufacturer: MOOG
- EAN number: 4044197438129
- Condition: New
- Fitting Position: Front Axle Right, Lower
- Cone Size [mm]: 14,8
- Supplementary Article / Supplementary Info: with crown nut and split pin
- Weight [kg]: 0,580
- for OE number: 40160-9C500
- Paired product: ADN18649
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Mounting points diameter [mm]: 12,5, 13,5
- External Thread Size: M14 x 1,5, M12 x 1,25
- Item number: ADN18648
- Manufacturer: BLUE PRINT
- EAN number: 5050063186482
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Right, Lower
- Cone Size [mm]: 14,8
- Supplementary Article / Supplementary Info: with crown nut and split pin
- Weight [kg]: 0,78
- Paired product: 42649
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Mounting points diameter [mm]: 12,5, 13,5
- Observe service information
- External Thread Size: M14 x 1,5, M12 x 1,25
- Item number: 42648
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816426486
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Lower Left, Lower Right
- Cone Size [mm]: 14,7
- Cone Pitch: 1 / 6
- Thread Size: R-M14×1,5
- Weight [kg]: 0,27
- Item number: SB-4592
- Manufacturer: 555
- EAN number: 4582447001889
- Condition: New
- Fitting Position: Lower, Front Axle Right
- Supplementary Article / Supplementary Info: with accessories
- Paired product: 20228 02
- Item number: 20227 02
- Manufacturer: LEMFÖRDER
- EAN number: 4047437052611
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Front Axle Right, Lower
- Cone Size [mm]: 14,9
- Thread Size: M14X1.5
- Length [mm]: 63,5
- Paired product: NI-BJ-5199
- Height [mm]: 27
- Mounting Type: Bolted
- Packing Type: Box
- Packaging length [cm]: 11,5
- Packaging width [cm]: 11,5
- Packaging height [cm]: 15
- Item number: NI-BJ-5200
- Manufacturer: MOOG
- EAN number: 4044197438136
- Condition: New
- Fitting Position: Front Axle Left
- Cone Size [mm]: 15
- Thread Size 1: MM14x1,5R
- Paired product: 42089
- only in connection with: 3 x M12
- Item number: 42088
- Manufacturer: SIDEM
- EAN number: 5413978195572
- Condition: New
- Fitting Position: Front Axle Right
- Cone Size [mm]: 15
- Thread Size 1: MM14x1,5R
- Paired product: 42088
- only in connection with: 3 x M12
- Item number: 42089
- Manufacturer: SIDEM
- EAN number: 5413978195589
- Condition: New
- Fitting Position: Front Axle Right, Lower
- Cone Size [mm]: 14,8
- Supplementary Article / Supplementary Info: with crown nut and split pin
- Weight [kg]: 0,58
- Paired product: 82 94 2649
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Mounting points diameter [mm]: 12,5, 13,5
- Observe service information
- External Thread Size: M14 x 1,5, M12 x 1,25
- Item number: 82 94 2648
- Manufacturer: SWAG
- EAN number: 4044688426482
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle Left
- Cone Size [mm]: 15
- Thread Size 1: MM14x1,5R
- Paired product: 46595
- only in connection with: 3 x M12
- Item number: 46594
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978818013
- Condition: New
- Fitting Position: Front Axle Right
- Cone Size [mm]: 15
- Thread Size 1: MM14x1,5R
- Paired product: 46594
- only in connection with: 3 x M12
- Item number: 46595
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978818020
- Condition: New
- Fitting Position: Lower, Front Axle Right
- Paired product: V38-9529
- Packaging width [cm]: 13
- Packaging height [cm]: 9,5
- Packaging Depth [cm]: 7
- Item number: A38-9527
- Manufacturer: ACKOJA
- EAN number: 4062375083411
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- 1
- 2
- 3
- 4