Nissan Sunny Coupe B12 1.6 Ball joint (84 hp Petrol E16S)
- Fitting Position: Lower, Front Axle, Front axle both sides, outer, both sides
- Cone Size [mm]: 18,6
- Cone Pitch: 1:6
- Fitted Diameter [mm]: 15
- Diameter [mm]: 38,2
- Thread Size 1: M14X1,5
- Overall Height [mm]: 85
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with nut
- Thread Length [mm]: 26
- Item number: 2462S0062
- Manufacturer: RIDEX
- EAN number: 4059191417797
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Cone Size [mm]: 14,9
- Thread Length [mm]: 26
- Item number: 59252
- Manufacturer: MAPCO
- EAN number: 4043605071668
- Condition: New
- Fitting Position: Front Axle, Lower
- Fitted Diameter [mm]: 15
- Diameter [mm]: 38,3
- Overall Height [mm]: 85
- External Thread 1 [mm]: 14 x 1,5
- Item number: 53-01-130
- Manufacturer: ASHIKA
- EAN number: 8033001107630
- Condition: New
- Fitting Position: both sides
- Production Number: S4224000
- Item number: 422-10-4000
- Manufacturer: SAKURA
- EAN number: 5900427519367
- Condition: New
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- Thread Size: M14 x 1,5
- Diameter [mm]: 38
- Weight [kg]: 0,177
- Thread Size 1: M14X1,5
- Height [mm]: 50
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Packaging Depth [cm]: 10
- Item number: A38-1134
- Manufacturer: ACKOJA
- EAN number: 4046001931307
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: outer, Front Axle, Left, Right, Lower, Front, both sides
- Cone Size [mm]: 15
- Diameter [mm]: 38
- External Thread Size: М14х1.5
- Item number: 58-PW-04
- Manufacturer: MOTOTECHNIKA
- EAN number: 58-PW-04
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
- Cone Size [mm]: 14,8
- Diameter [mm]: 38,2
- Weight [kg]: 0,307
- Thread Size 1: M14X1.5 RHT
- Paired product: 220175
- Item number: 220175
- Manufacturer: A.B.S.
- EAN number: 8717109317503
- Condition: New
Important: Observe Fitting Instructions
- Fitting Position: Front Axle, Lower
- Cone Size [mm]: 15
- Thread Size: M14x1,5
- Diameter [mm]: 38,3
- Item number: 9040052
- Manufacturer: KAMOKA
- EAN number: 2218515501322
- Condition: New
- Fitting Position: Front Axle Right, Front Axle Left, Lower, Front Axle
- Cone Size [mm]: 15
- External Thread 2 [mm]: M14x1,5
- Item number: 10Z1006-OYO
- Manufacturer: Oyodo
- EAN number: 226984177682371776823
- Condition: New
- Fitting Position: Lower, Front Axle, Lower Front Axle
- Thread Size: M14x1,5
- Supplementary Article / Supplementary Info: with accessories
- External Thread 1 [mm]: 14 x 1,5
- Height [mm]: 50
- Item number: 72-0420
- Manufacturer: MAXGEAR
- EAN number: 5907558519341
- Condition: New
- Fitting Position: Front Axle, Lower
- Item number: D110022
- Manufacturer: DENCKERMANN
- EAN number: 5901225713834
- Condition: New
- Fitting Position: Front Axle, Lower
- Vehicle Equipment: for vehicles with power steering, for vehicles without power steering
- Thread Size: M14x1.5
- Length [mm]: 45
- Thread Size 1: M14x1.5
- Height [mm]: 86
- Width [mm]: 45
- Item number: TC435
- Manufacturer: DELPHI
- EAN number: 5012759858370
- Condition: New
- Fitting Position: Front Axle, Lower
- Net weight [kg]: 0,33
- Item number: 5042228
- Manufacturer: NK
- EAN number: 5703858467302
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right, Lower
- Item number: 4040300100
- Manufacturer: JP GROUP
- EAN number: 5710412571252
- Condition: New
- Fitting Position: Lower, Front Axle, both sides, outer
- Control / Trailing Arm Type: for control arm
- Item number: J11005YMT
- Manufacturer: YAMATO
- EAN number: 5901170598456
- Condition: New
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- Weight [kg]: 0,400
- Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Item number: L14060
- Manufacturer: MONROE
- EAN number: 5412096242861
- Condition: New
- Fitting Position: Front Axle, Lower
- Cone Size [mm]: 14,7
- Thread Size: MM14X1,5R
- Diameter [mm]: 38,2
- Item number: QSJ3610S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438354287
- Condition: New
- Fitting Position: Lower Front Axle
- Cone Size [mm]: 14,8
- Thread Size 1: M14x1.5
- for OE number: 5450070A00, 4016050A00
- Bore Diameter [mm]: 38,2
- Item number: DSS1272
- Manufacturer: DAYCO
- EAN number: 8021787434712
- Condition: New
- Fitting Position: Lower, Front Axle Left, Front Axle Right
- Cone Size [mm]: 14,7
- Required quantity: 2
- External Thread [mm]: M14x1,5
- Supplementary Article / Supplementary Info Info 2: with fastening material
- Item number: 19522
- Manufacturer: MAPCO
- EAN number: 4043605019448
- Condition: New
- Fitting Position: Lower Front Axle
- Cone Size [mm]: 15
- Diameter [mm]: 38,1
- Thread Size 1: MM14x1,5R
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting
- only in connection with: Circlip
- Observe service information
- Article number of the recommended special tool: R10078
- Item number: 41589
- Manufacturer: SIDEM
- EAN number: 5413978118236
- Condition: New
- 1
- 2
- 3
- 4
- 5