Vehicle identification number: 1590ACP
Range Rover L494 3.0 TDV6 4x4 Ball joint (258 hp Diesel 306DT(TDV6))
- Fitting Position: Upper, Front Axle Left, Front Axle Right
- Cone Size [mm]: 13,6
- Diameter [mm]: 42,4
- Required quantity: 2
- External Thread [mm]: M12x1,75
- Supplementary Article / Supplementary Info Info 2: with flanged nut, with retaining ring
- Thread Length [mm]: 31
- Item number: 52682
- Manufacturer: MAPCO
- EAN number: 4043605676498
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Upper, Front Axle Right
- Cone Size [mm]: 17
- Supplementary Article / Supplementary Info: with lock nut
- Weight [kg]: 0,37
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Observe service information
- External Thread Size: M12 x 1,75
- Item number: 44687
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816446873
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Upper, Front Axle
- Supplementary Info: EXPERT KITS +
- Cone Size [mm]: 22
- Weight [kg]: 0,599
- Packaging width [cm]: 9,5
- Packaging height [cm]: 7
- Packaging Depth [cm]: 13
- Item number: V48-9531
- Manufacturer: VAICO
- EAN number: 4046001410178
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Upper, Front Axle Right
- Cone Size [mm]: 17
- Supplementary Article / Supplementary Info: with lock nut
- Weight [kg]: 0,37
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Observe service information
- External Thread Size: M12 x 1,75
- Item number: 22 94 4687
- Manufacturer: SWAG
- EAN number: 4044688585752
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Upper, Front Axle Right
- Cone Size [mm]: 17
- Supplementary Article / Supplementary Info: with lock nut
- Weight [kg]: 0,37
- Control / Trailing Arm Type: for control arm
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- External Thread Size: M12 x 1,75
- Item number: ADJ138601
- Manufacturer: BLUE PRINT
- EAN number: 5050063178364
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Upper
- Cone Size [mm]: 13,6
- Diameter [mm]: 42,4
- Required quantity: 2
- External Thread [mm]: M12x1,75
- Supplementary Article / Supplementary Info Info 2: with retaining ring
- Thread Length [mm]: 25
- Item number: 51672
- Manufacturer: MAPCO
- EAN number: 4043605504067
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Cone Size [mm]: 18,4
- Thread Size: M14x1.5
- Number of mounting bores: 2
- Item number: QSJ3392S
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438132373
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Upper, Front Axle Left, Front Axle Right
- Cone Size [mm]: 18,5
- Diameter [mm]: 44,5
- Required quantity: 2
- External Thread [mm]: M14 x 1,5
- Item number: 51688
- Manufacturer: MAPCO
- EAN number: 4043605443700
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle both sides, Lower, inner, Rear Axle
- Diameter [mm]: 52
- Length [mm]: 65
- Weight [kg]: 0,505
- Inner Diameter [mm]: 14,2
- Item number: 93-01668
- Manufacturer: RTS
- EAN number: 8435130372222
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle both sides, Lower, outer
- Diameter [mm]: 52
- Length [mm]: 65
- Weight [kg]: 0,58
- Inner Diameter [mm]: 14,2
- Item number: 93-01667
- Manufacturer: RTS
- EAN number: 8435130372215
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle Right, Rear Axle Left, Lower, outer
- Item number: 39895 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437496231
- Condition: New
- Fitting Position: Rear Axle Left, Rear Axle Right, Lower, inner, Rear Axle
- Item number: 39894 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437495661
- Condition: New
- Fitting Position: Upper, Front Axle Right, Front Axle Left
- Supplementary Article / Supplementary Info: with accessories
- Required quantity: 2
- reinforced version
- only in connection with: 53-16 050 0028 / HD, 53-16 050 0027 / HD
- replacement in pairs recommended
- Item number: 53-16 010 0011/HD
- Manufacturer: MEYLE
- EAN number: 4040074260159
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 'Improved performance and service life: larger ball pin 4-year warranty on all MEYLE-HD parts. With mounting materials, to fit most models. Please check deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. fit accuracy before installation. life: larger ball pin diameter of MEYLE-HD ball joint technically improved with reinforced inner parts, using distributes forces over a larger surface area and minimizes higher quality materials or optimized design solution. part wear.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Upper, Front Axle
- Weight [kg]: 0,64
- Packaging length [cm]: 8,2
- Packaging width [cm]: 5,0
- Packaging height [cm]: 5,0
- Item number: 2920-RRIVUF
- Manufacturer: FEBEST
- EAN number: 4056111165868
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Weight [kg]: 0,134
- Packaging length [cm]: 5,4
- Packaging width [cm]: 5,4
- Packaging height [cm]: 1,8
- Item number: 2998-002
- Our price: 8,59 €
- Manufacturer: FEBEST
- EAN number: 224674181427771814277
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Upper, Front Axle Left, Front Axle Right
- Cone Size [mm]: 17
- Control / Trailing Arm Type: Control Arm
- Item number: 463 388
- Manufacturer: HART
- EAN number: 5902198836063
- Condition: New
- Fitting Position: Upper, Front Axle Left, Front Axle Right
- Cone Size [mm]: 17
- External Thread [mm]: M12 x 1,75
- Supplementary Article / Supplementary Info Info 2: with nut, with retaining ring
- Weight [g]: 450
- Item number: 130018
- Manufacturer: DAKAtec
- EAN number: 4250745532281
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right, Upper
- Required quantity: 2
- for OE number: RBK500170
- Item number: SS6417
- Manufacturer: FAI AutoParts
- EAN number: 2226712115434
- Condition: New
- Fitting Position: Front Axle Left, Front Axle Right, Upper
-
- Alternatively
- Special Purpose Vehicle: for armoured vehicles
- Thread Type: External Thread
- Thread Size 1: M14x1.5
- Bore Diameter [mm]: 44,5
- Control / Trailing Arm Type: for control arm
- Mounting Type: Bolted
- Number of mounting bores: 4
- Thread Type: with external thread
- Version: Fitting Kit
- Bore Diameter 1 [mm]: 18,5
- Number of rivet holes: 2
- Item number: BBJ5571
- Manufacturer: BORG & BECK
- EAN number: 5055188224996
- Condition: New
With M5 solenoid terminal
- Fitting Position: Front axle both sides, Upper
- Cone Size [mm]: 14
- Diameter [mm]: 42, 56
- Length [mm]: 94
- External Thread [mm]: M12 x 1,75
- Weight [kg] 0
- Component Number: BSG 15-310-135
- Item number: BSG 15-310-135
- Manufacturer: BSG
- EAN number: 8719822003633
- Condition: New
- 1
- 2