BMW E39 Touring 520 i Steering knuckle (136 hp Petrol M52 B20 (206S3))
- paired article number: 59478
- Fitting Position: Front Axle Left
- Item number: 59477
- Our price: 181,35 €
- Manufacturer: AIC
- EAN number: 4046283594771
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
- paired article number: 59477
- Fitting Position: Front Axle Right
- Item number: 59478
- Our price: 181,35 €
- Manufacturer: AIC
- EAN number: 4046283594788
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
- Diameter [mm]: 324
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 29,9
- Fitting Position: Front Axle
- Height [mm]: 73,7
- Surface: Coated
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 28,4
- Inner Diameter [mm]: 149
- Machining: High-carbon
- Special Purpose Vehicle: for government vehicles
- Bore Diameter [mm]: 14,8
- Drilled: no
- Item number: C3B024ABE
- Manufacturer: ABE
- EAN number: 5900427198890
- Condition: New
- Diameter [mm]: 296
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 21,9
- Fitting Position: Front Axle
- Height [mm]: 76,1
- Surface: Oiled
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 20,4
- Test Mark: E1 90R-02C0074 / 0201
- Drilled: no
- Item number: BG3043
- Manufacturer: DELPHI
- EAN number: 5012759062814
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 298
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 61
- Surface: Oiled
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Minimum thickness [mm]: 8,4
- Test Mark: E1 90R-02C0241 / 1563
- Drilled: no
- Item number: BG3044
- Manufacturer: DELPHI
- EAN number: 5012759062821
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year from: 04 / 1999
- Fitting Position: Front Axle
- Braking System: not for vehicles with reinforced brakes
- Diameter [mm]: 296
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 76
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 20,4
- Drilled: no
- Item number: B2441V
- Manufacturer: LPR
- EAN number: 8032532069776
- Condition: New
- Diameter [mm]: 324, 324,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30,0
- Fitting Position: Front Axle
- Height [mm]: 73,8
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Production Number: 6042670
- Drilled: no
- Item number: 6042670
- Manufacturer: KRAFT
- EAN number: 5901159205030
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: for government vehicles
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,5
- Height [mm]: 73,2
- Width [mm]: 156,3
- Test Mark: E1 90R-02A0334 / 0382
- MAPP code available
- Article number of recommended accessories: 24.8190-0208.2, 24.8190-0219.2, 24.8190-0225.2, 24.8190-0254.2
- Observe dimensions
- Item number: 13.0460-7078.2
- Our price: 70,24 €
- Manufacturer: ATE
- EAN number: 4006633281287
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,3
- Fitting Position: Rear Axle
- Height [mm]: 44,9
- Width [mm]: 123,0
- Test Mark: E1 90R-02A0498 / 0352
- MAPP code available
- Article number of recommended accessories: 24.8190-0218.2, 24.8190-0222.2
- Observe dimensions
- Item number: 13.0460-7090.2
- Our price: 43,53 €
- Manufacturer: ATE
- EAN number: 4006633239004
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: for government vehicles
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,5
- Product line: Ceramic
- Height [mm]: 73,2
- Width [mm]: 156,3
- Test Mark: E1 90R-02A0258 / 0292
- MAPP code available
- Article number of recommended accessories: 24.8190-0208.2, 24.8190-0219.2, 24.8190-0225.2, 24.8190-0254.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7078.2
- Our price: 91,84 €
- Manufacturer: ATE
- EAN number: 4006633339810
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: not for government vehicles
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,3
- Product line: Ceramic
- Height 1 [mm]: 63,5
- Height 2 [mm]: 63,5
- Width 2 [mm]: 154,6
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0258 / 0294
- MAPP code available
- Article number of recommended accessories: 24.8190-0219.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7089.2
- Our price: 79,98 €
- Manufacturer: ATE
- EAN number: 4006633107129
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Rear Axle
- Height [mm]: 61
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Thickness [mm]: 20
- Minimum thickness [mm]: 18,4
- Machining: High-carbon
- Wear Warning Contact: incl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: C4B007ABE
- Manufacturer: ABE
- EAN number: 5900427204836
- Condition: New
- Diameter [mm]: 298
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20
- Fitting Position: Rear Axle
- Height [mm]: 61
- Surface: Oiled
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Minimum thickness [mm]: 18,4
- Test Mark: E1 90R-02C0506 / 1830
- Drilled: no
- Item number: BG3042
- Manufacturer: DELPHI
- EAN number: 5012759062807
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Fitting Position: Front Axle
- Height [mm]: 73,6
- Width [mm]: 156,4
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 19,0
- Production Number: 6002710
- Item number: 6002710
- Our price: 43,26 €
- Manufacturer: KRAFT
- EAN number: 5900427187382
- Condition: New
-
- Special Purpose Vehicle: not for government vehicles
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 20,3
- Height 1 [mm]: 63,5
- Height 2 [mm]: 63,5
- Width 2 [mm]: 154,6
- Width 1 [mm]: 155,1
- Test Mark: E1 90R-02A0334 / 0293
- MAPP code available
- Article number of recommended accessories: 24.8190-0219.2
- Observe dimensions
- Item number: 13.0460-7089.2
- Our price: 62,64 €
- Manufacturer: ATE
- EAN number: 4006633238984
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,3
- Product line: Ceramic
- Fitting Position: Rear Axle
- Height [mm]: 44,9
- Width [mm]: 123,0
- Test Mark: E1 90R-02A0258 / 0352
- MAPP code available
- Article number of recommended accessories: 24.8190-0218.2, 24.8190-0222.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7090.2
- Our price: 60,42 €
- Manufacturer: ATE
- EAN number: 4006633339889
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 298,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 20,0
- Fitting Position: Rear Axle
- Height [mm]: 61,3
- Surface: Coated
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 18,4
- Inner Diameter [mm]: 185,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0234 / 1092
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0120-0154.1
- Manufacturer: ATE
- EAN number: 4006633068154
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: not for government vehicles
- Fitting Position: Front Axle
- Diameter [mm]: 296,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 76,3
- Surface: Coated
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 20,4
- Inner Diameter [mm]: 148,8
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0016
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0159.1
- Manufacturer: ATE
- EAN number: 4006633068291
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Special Purpose Vehicle: for government vehicles
- Fitting Position: Front Axle
- Diameter [mm]: 324,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 29,9
- Height [mm]: 73,7
- Surface: Coated
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 28,4
- Inner Diameter [mm]: 149,0
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0247
- Bore Diameter [mm]: 14,8
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0130-0107.1
- Manufacturer: ATE
- EAN number: 4006633084208
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 298,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 20,0
- Fitting Position: Rear Axle
- Height [mm]: 61,3
- Surface: Coated
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 17,6
- Inner Diameter [mm]: 185,0
- Machining: High-carbon
- MAPP code available
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0320-0154.1
- Manufacturer: ATE
- EAN number: 4006633147330
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs