Vehicle identification number: 8566AWY
Ford Mondeo Mk4 Facelift 1.6 EcoBoost Strut mount and bearing (160 hp Petrol JTBB)
- Fitting Position: Front Axle Left, Front Axle Right
- Item number: V25-1750
- Manufacturer: VAICO
- EAN number: 4062375173723
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Inner Diameter [mm]: 8,4
- Height: 33,5
- only in connection with: 32
- Item number: 410380
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978867301
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle Left, Rear Axle Right
- Quantity per axle: 2
- for OE number: 1437051, 6G91-18A116-AAA
- Supplementary Article / Supplementary Info: Rolling Bearing is not required
- Item number: 802 416
- Manufacturer: SACHS
- EAN number: 4059923049371
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Info: Original VAICO Quality
- Supplementary Article / Supplementary Info Info 2: without rolling bearing, without bearing
- Weight [kg]: 1,063
- Mounting Type: Rubber-Metal Mount
- Packaging width [cm]: 14,9
- Packaging height [cm]: 5
- Packaging Depth [cm]: 15,9
- Item number: V25-1142
- Manufacturer: VAICO
- EAN number: 4046001797798
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Construction Year to: 09 / 2014
- Supplementary Article / Supplementary Info Info 2: without bearing
- Weight [kg]: 1,060
- Packaging length [cm]: 19,1
- Packaging width [cm]: 10
- Packaging height [cm]: 21,6
- Item number: MK400
- Manufacturer: MONROE
- EAN number: 5412096510137
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Weight [kg]: 0,22
- Item number: 63-09490
- Manufacturer: TALOSA
- EAN number: 8435229596201
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Supplementary Info: Original VAICO Quality
- Weight [kg]: 1,177
- for OE number: 1 441 597
- Packaging width [cm]: 13,75
- Packaging height [cm]: 21,25
- Packaging Depth [cm]: 10,5
- Item number: V25-0523
- Manufacturer: VAICO
- EAN number: 4046001540059
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Inner Diameter [mm]: 14
- Internal Thread Size: M8 x 1,25
- Item number: 50 93 8219
- Manufacturer: SWAG
- EAN number: 4044688382191
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Inner Diameter [mm]: 14
- Observe service information
- Internal Thread Size: M8 x 1,25
- Item number: 38219
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816382195
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Front Axle Right
- Supplementary Article / Supplementary Info Info 2: without ball bearing
- Quantity per axle: 2
- for OE number: 1377259, 1381836, 1406414, 1441597, 1734710, 1761001, 30736503, 31200897, 31340241, 31340242, 31340605, 31340606, 5183155, 6G91-3K155-AAA, 6G91-3K155-AAB, 6G91-3K155-AAC, 6G91-3K155-AAD, AG91-3K155-BAA, AG91-3K155-BAB, DG9C-3K155-AXB
- Item number: 37766 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437432734
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right, Front Axle Left
- Supplementary Article / Supplementary Info Info 2: without bearing
- Weight [kg]: 1,05
- Specification: Without Bearing
- Item number: 63-02595
- Manufacturer: TALOSA
- EAN number: 8435457100843
- Condition: New
- Fitting Position: Front Axle
- Supplementary Info: ORIGINAL Quality
- Supplementary Article / Supplementary Info Info 2: without bearing
- Required quantity: 2
- replacement in pairs recommended
- Item number: 714 641 0009
- Manufacturer: MEYLE
- EAN number: 4040074058282
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 164,2
- Height: 48,2
- only in connection with: 67,8
- Item number: 803430
- Manufacturer: SIDEM
- EAN number: 5413978272952
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Material: Elastomer
- Supplementary Article / Supplementary Info Info 2: with ball bearing
- Weight [kg]: 1,310
- Colour Coding: green
- Item number: 38227
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816382270
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 164,2
- Height: 48,2
- only in connection with: 67,8
- Item number: 410353
- Manufacturer: SPIDAN CHASSIS PARTS
- EAN number: 5413978866809
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 12
- Diameter: 68
- Height: 48
- Item number: 1180S0222
- Manufacturer: RIDEX
- EAN number: 4059191675852
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Inner Diameter [mm]: 12,2
- Mounting Type: Rubber-Metal Mount
- Height: 48
- Item number: 814 0204 10
- Manufacturer: FAG
- EAN number: 4014870623173
- Condition: New
- Supplementary Article / Supplementary Info Info 2: with ball bearing
- Weight [kg]: 1,310
- Colour Coding: green
- Item number: 50 93 8227
- Manufacturer: SWAG
- EAN number: 4044688654380
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front axle both sides, Front Axle
- Item number: 518930S
- Manufacturer: GSP
- EAN number: 2237313921707
- Condition: New
- Fitting Position: Front Axle
- Supplementary Info: Original VAICO Quality
- Weight [kg]: 0,997
- for OE number: 1 761 001
- Supplementary Article / Supplementary Info: with integrated ball bearing
- Packaging width [cm]: 14,9
- Packaging height [cm]: 4,8
- Packaging Depth [cm]: 16,4
- Item number: V25-0667
- Manufacturer: VAICO
- EAN number: 4046001598296
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- 1
- 2
- 3
- 4
- 5