Fiat Tempra SW 1.6 Suspension arm (69 hp Petrol 159 A3.048)
- Fitting Position: Front Axle Right, Lower
- Control / Trailing Arm Type: Control Arm
- Paired product: VKDS 322024 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322025 B
- Manufacturer: SKF
- EAN number: 7316577896391
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right
- Control / Trailing Arm Type: Semi-Trailing Arm
- Material: Steel
- Paired product: 301181304200
- Item number: 301181304100
- Manufacturer: MAGNETI MARELLI
- EAN number: 8001063296937
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right, Lower, outer
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Paired product: JTC375
- Item number: JTC376
- Manufacturer: TRW
- EAN number: 3322937904594
- Condition: New
- Fitting Position: Front Axle Left, Lower
- Control / Trailing Arm Type: Control Arm
- Paired product: VKDS 322025 B
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with synthetic grease
- Control / Trailing Arm Design: Triangular Control Arm
- Item number: VKDS 322024 B
- Manufacturer: SKF
- EAN number: 7316577896414
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Left, Lower
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- Paired product: FI-WP-7503
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 46,5
- Packaging width [cm]: 34,4
- Packaging height [cm]: 8
- Item number: FI-WP-7504
- Manufacturer: MOOG
- EAN number: 5010874758476
- Condition: New
- Fitting Position: Front Axle Left, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Length [mm]: 393
- Paired product: TC895
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 325
- Item number: TC894
- Manufacturer: DELPHI
- EAN number: 5012759174272
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 15
- Length [mm]: 390
- Paired product: QSA1083S
- Thread Size: M10x1,25
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Width [mm]: 83, 390
- Item number: QSA1084S
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593628977
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Length [mm]: 393
- Paired product: TC894
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 325
- Item number: TC895
- Manufacturer: DELPHI
- EAN number: 5012759174289
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Lower Front Axle, outer, Left, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: Original VAICO Quality
- Paired product: V24-7109
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Article number of the recommended special tool: V99-1020
- Axle alignment required after fitting
- Packaging width [cm]: 8,3
- Packaging height [cm]: 32,1
- Packaging Depth [cm]: 41,2
- Item number: V24-7108
- Manufacturer: VAICO
- EAN number: 4046001367816
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Paired product: 821 0363 10
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Bolt Head Diameter [mm]: 17,00
- Item number: 821 0362 10
- Manufacturer: FAG
- EAN number: 4014870411510
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Lower Front Axle, outer, Right, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Supplementary Info: Original VAICO Quality
- Paired product: V24-7108
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging width [cm]: 8,3
- Packaging height [cm]: 32,1
- Packaging Depth [cm]: 41,2
- Item number: V24-7109
- Manufacturer: VAICO
- EAN number: 4046001367823
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left, Lower
- Paired product: TC695
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Length [mm]: 405
- Height [mm]: 82
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 321
- Item number: TC694
- Manufacturer: DELPHI
- EAN number: 5012759090268
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right, Lower
- Paired product: TC694
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Length [mm]: 405
- Height [mm]: 82
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 321
- Item number: TC695
- Manufacturer: DELPHI
- EAN number: 5012759090275
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Right, Lower
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- Paired product: FI-WP-7504P
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Packing Type: Bag
- Packaging length [cm]: 39,5
- Packaging width [cm]: 32
- Packaging height [cm]: 7,5
- Item number: FI-WP-7503P
- Manufacturer: MOOG
- EAN number: 4044197317622
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Paired product: 821 0362 10
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Bolt Head Diameter [mm]: 17,00
- Item number: 821 0363 10
- Manufacturer: FAG
- EAN number: 4014870421144
- Condition: New
- Fitting Position: Front Axle Left, Lower
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 17
- Paired product: S060432
- Item number: S060433
- Manufacturer: GSP
- EAN number: 2237313923205
- Condition: New
- Fitting Position: Front Axle Right, Front Axle, outer, Right, Lower
- Control / Trailing Arm Type: Control Arm
- Paired product: ZWD-FT-017
- Fabrication Number: ZWD-FT-016
- Item number: ZWD-FT-016
- Manufacturer: NTY
- EAN number: 5902048914309
- Condition: New
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Grey Cast Iron
- Cone Size [mm]: 17
- Paired product: BR1156
- Weight [g]: 3100
- Item number: BR1157
- Manufacturer: BIRTH
- EAN number: 2248927807830
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle Right, outer, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Cone Size [mm]: 17
- Length [mm]: 309
- Paired product: 210159
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,603
- as standard
- Item number: 210160
- Manufacturer: A.B.S.
- EAN number: 8717109311365
- Condition: New
Important: Observe Fitting Instructions
- Fitting Position: Front Axle Right, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Cast Steel
- Diameter [mm]: 17
- Paired product: 70 92 9505
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Weight [kg]: 3,06
- Supplementary Article / Supplementary Info: with holders, with holder
- Item number: 70 92 9506
- Manufacturer: SWAG
- EAN number: 4044688511812
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- 1
- 2
- 3
- 4
- 5