DAEWOO Nubira Hatchback (J100) 1.6 Suspension arm (103 hp Petrol A16DMS)
Sample photo only
- Fitting Position: Front Axle Right, Lower Front Axle, Right
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Length [mm]: 294
- Height [mm]: 316,0
- Packaging height [cm]: 16
- Gross Weight [g]: 4300
- Item number: CQKD-10R
- Manufacturer: CTR
- EAN number: 5901159105323
- Condition: New
- Fitting Position: Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Paired product: A51-9507
- Colour: black
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Packaging height [cm]: 7,5
- Packaging width [cm]: 27,5
- Item number: A51-9509
- Manufacturer: ACKOJA
- EAN number: 4062375037742
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Sample photo only
- Fitting Position: Front Axle Left, Lower Front Axle, Left
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Length [mm]: 294
- Height [mm]: 316,0
- Packaging height [cm]: 16
- Gross Weight [g]: 4300
- Item number: CQKD-10L
- Manufacturer: CTR
- EAN number: 5901159105316
- Condition: New
- Fitting Position: Front Axle Right, Lower Front Axle, Right
- Control / Trailing Arm Type: Control Arm
- Material: Steel, Aluminium
- Length [mm]: 294
- Height [mm]: 316,0
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with bush
- Item number: CQ0092R
- Manufacturer: CTR
- EAN number: 224401179349071793490
- Condition: New
- Fitting Position: Front Axle, Left, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Cone Size [mm]: 16
- Paired product: 36202-PCS-MS
- Quantity per axle: 1
- Net weight [kg]: 3,05
- Gross Weight [kg]: 3,10
- Item number: 36201-PCS-MS
- Manufacturer: MASTER-SPORT
- EAN number: 4250083975030
- Condition: New
- Fitting Position: Front Axle Left, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Paired product: 49291
- Required quantity: 1
- Item number: 49290
- Manufacturer: MAPCO
- EAN number: 4043605063496
- Condition: New
Sample photo only
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Production Number: K4218304
- Item number: 4218304
- Manufacturer: KRAFT
- EAN number: 5901159286633
- Condition: New
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Paired product: 26663
- Supplementary Article / Supplementary Info Info 2: with ball joint, with bearing(s)
- Weight [kg]: 3,510
- Supplementary Article / Supplementary Info: with rubber mounts
- Observe service information
- Item number: 26662
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816266624
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Paired product: 26662
- Weight [kg]: 3,510
- Supplementary Article / Supplementary Info: with rubber mounts, with sleeves
- Observe service information
- Item number: 26663
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816266631
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Left, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Paired product: 36202 01
- Item number: 36201 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437393769
- Condition: New
- Fitting Position: Front Axle Right, outer, Front Axle, Right, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Paired product: JTC2109
- Item number: JTC1497
- Manufacturer: TRW
- EAN number: 3322938115135
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle, Right, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Paired product: 36201 01
- Item number: 36202 01
- Manufacturer: LEMFÖRDER
- EAN number: 4047437393783
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle, Right, Lower
- Control / Trailing Arm Type: Control Arm
- Paired product: OP-WP-0836
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 51
- Packaging width [cm]: 44,5
- Packaging height [cm]: 15
- Item number: OP-WP-0833
- Manufacturer: MOOG
- EAN number: 4044197208838
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Paired product: ADG08621
- Supplementary Article / Supplementary Info Info 2: with ball joint, with bearing(s)
- Weight [kg]: 3,4
- Supplementary Article / Supplementary Info: with rubber mounts
- Item number: ADG08620
- Manufacturer: BLUE PRINT
- EAN number: 5050063086201
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right, outer, Lower
- Control / Trailing Arm Type: Control Arm
- Material: Steel
- Cone Size [mm]: 16
- Length [mm]: 309
- Paired product: 210615
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Weight [kg]: 3,62
- as standard
- Item number: 210616
- Manufacturer: A.B.S.
- EAN number: 8717109336887
- Condition: New
Important: Observe Fitting Instructions
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Paired product: ADG08620
- Weight [kg]: 3,4
- Supplementary Article / Supplementary Info: with rubber mounts, with sleeves
- Item number: ADG08621
- Manufacturer: BLUE PRINT
- EAN number: 5050063086218
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle Left, Lower Front Axle, Left
- Control / Trailing Arm Type: Control Arm
- Material: Steel, Aluminium
- Length [mm]: 294
- Height [mm]: 316,0
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Supplementary Article / Supplementary Info: with bush
- Item number: CQ0092L
- Manufacturer: CTR
- EAN number: 224401179349061793490
- Condition: New
- Fitting Position: Front Axle Right, Lower
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 16
- Item number: 30Z0017-OYO
- Manufacturer: Oyodo
- EAN number: 226984177741591777415
- Condition: New
- Fitting Position: Front Axle Left, Lower
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 16
- Item number: 30Z0016-OYO
- Manufacturer: Oyodo
- EAN number: 226984177741581777415
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front, Lower, Left
- Control / Trailing Arm Type: Control Arm
- TecDoc Engine Number: A16DMS
- Item number: 503-20051
- Manufacturer: IAP QUALITY PARTS
- EAN number: 226359146899781468997
- Condition: New
- 1
- 2
- 3