Audi A5 B8 Convertible 2.0 TFSI Suspension arm (220 hp Petrol CAED)
- Fitting Position: Front Axle Left, Rear, Upper
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Length [mm]: 233
- Paired product: 116 050 0165 / HD
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Required quantity: 1
- Replace in pairs only
- Item number: 116 050 0166/HD
- Manufacturer: MEYLE
- EAN number: 4040074002490
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 'Improved performance and service life: larger ball pin 4-year warranty on all MEYLE-HD parts. deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. life: larger ball pin diameter of MEYLE-HD ball joint technically improved with reinforced inner parts, using distributes forces over a larger surface area and minimizes higher quality materials or optimized design solution. part wear.
- Fitting Position: Upper, Front, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16,0
- Length [mm]: 268
- Height [mm]: 40
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 1
- Mounting points diameter [mm]: 10,2
- with environmental seal: Carbon Neutral
- Item number: 273C0100P
- Manufacturer: RIDEX PLUS
- EAN number: 4059191999149
- Condition: New
- Fitting Position: Upper, Rear, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Length [mm]: 233
- Supplementary Article / Supplementary Info Info 2: with rubber mount
- Item number: 273C0318
- Manufacturer: RIDEX
- EAN number: 4059191207701
- Condition: New
- Fitting Position: Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16,9
- Paired product: V10-5346
- External Thread [mm]: M14x1,5
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Axle alignment required after fitting
- Article number of the recommended special tool: V99-1020
- Item number: V10-5345
- Manufacturer: VAICO
- EAN number: 4062375049578
- Condition: New
Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- Fitting Position: Upper, Front, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Length [mm]: 268
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 1
- Mounting points diameter [mm]: 10,2
- Width [mm]: 40
- with environmental seal: Carbon Neutral
- Item number: 273C0097
- Manufacturer: RIDEX
- EAN number: 4059191216550
- Condition: New
- Fitting Position: Rear Axle Left, outer, Lower
- Control / Trailing Arm Type: Control Arm
- Paired product: SCA-10276
- Item number: SCA-10277
- Manufacturer: KAVO PARTS
- EAN number: 2220122290482
- Condition: New
- Fitting Position: Rear, Lower, Front Axle Right
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 16,8
- Paired product: 37252
- Rod / Strut: Push Rod
- only in connection with: Ball joint+HYDRO SB
- Observe service information
- Version: with HYDRO SB
- Item number: 37253
- Manufacturer: SIDEM
- EAN number: 5413978248889
- Condition: New
- Fitting Position: Upper, Front, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Length [mm]: 268
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 1
- Mounting points diameter [mm]: 10,2
- Width [mm]: 40
- with environmental seal: Carbon Neutral
- Item number: 273C0097P
- Manufacturer: RIDEX PLUS
- EAN number: 4059191999125
- Condition: New
- Fitting Position: Front, Lower, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Paired product: 116 050 0225
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Required quantity: 1
- Replace in pairs only
- replacement in pairs recommended
- Item number: 116 050 0224
- Manufacturer: MEYLE
- EAN number: 4040074363713
- Condition: New
- Fitting Position: Front, Lower, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Length [mm]: 351
- Paired product: 116 050 0224 / HD
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Replace in pairs only
- Bore Diameter [mm]: 17
- Item number: 116 050 0225/HD
- Manufacturer: MEYLE
- EAN number: 4040074232699
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 4-year warranty on all MEYLE-HD parts. With mounting materials, to fit most models. Please check deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. fit accuracy before installation. technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
- Fitting Position: Front Axle Right, Lower, Front
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Article / Supplementary Info Info 2: with rubber mount, without ball joint
- Item number: 821 1070 10
- Manufacturer: FAG
- EAN number: 4014870621643
- Condition: New
- Fitting Position: Front, Lower, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Paired product: 116 050 0225 / HD
- Supplementary Article / Supplementary Info Info 2: without ball joint, with rubber mount
- Required quantity: 1
- Supplementary Article / Supplementary Info: with fastening / mounting material
- Replace in pairs only
- Bore Diameter [mm]: 17
- Item number: 116 050 0224/HD
- Manufacturer: MEYLE
- EAN number: 4040074232705
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 4-year warranty on all MEYLE-HD parts. With mounting materials, to fit most models. Please check deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. fit accuracy before installation. technically improved with reinforced inner parts, using higher quality materials or optimized design solution.
- Fitting Position: Front Axle, Left, Lower, Rear
- Manufacturer Restriction: rear bush Ø65mm
- Control / Trailing Arm Type: Control Arm
- Paired product: AU-TC-10800
- Supplementary Article / Supplementary Info Info 2: with ball joint, with rubber mount
- Packing Type: Box
- Packaging length [cm]: 55,8
- Packaging width [cm]: 25,7
- Packaging height [cm]: 9,1
- Item number: AU-TC-10799
- Manufacturer: MOOG
- EAN number: 4044197663583
- Condition: New
- Fitting Position: Rear, Left, Upper
- Paired product: TC2336
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Length [mm]: 286
- Height [mm]: 60
- Supplementary Article / Supplementary Info Info 2: with ball joint
- Width [mm]: 45
- Item number: TC2335
- Manufacturer: DELPHI
- EAN number: 5012759467718
- Condition: New
- Fitting Position: Rear, Lower, Front Axle Left
- Control / Trailing Arm Type: Trailing Arm
- Material: Aluminium
- Cone Size [mm]: 16,8
- Paired product: 37253
- Rod / Strut: Push Rod
- only in connection with: Ball joint+HYDRO SB
- Observe service information
- Version: with HYDRO SB
- Item number: 37252
- Manufacturer: SIDEM
- EAN number: 5413978248872
- Condition: New
- Fitting Position: Upper, Front, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Length [mm]: 269
- Paired product: 116 050 0167 / HD
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 1
- reinforced version
- Replace in pairs only
- Item number: 116 050 0168/HD
- Manufacturer: MEYLE
- EAN number: 4040074002520
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 'Improved performance and service life: larger ball pin 4-year warranty on all MEYLE-HD parts. deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. life: larger ball pin diameter of MEYLE-HD ball joint technically improved with reinforced inner parts, using distributes forces over a larger surface area and minimizes higher quality materials or optimized design solution. part wear.
- Fitting Position: Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Cone Size [mm]: 12
- Thread Size 1: M12
- Thread Size 2: M10
- Item number: RH04-0032
- Manufacturer: REINHOCH
- EAN number: 5901655168907
- Condition: New
- Fitting Position: Upper, Front, Front Axle Left
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Cone Size [mm]: 16
- Length [mm]: 268
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 1
- Mounting points diameter [mm]: 10,2
- Width [mm]: 40
- with environmental seal: Carbon Neutral
- Item number: GCB730039
- Manufacturer: goCORE
- EAN number: 4067448638376
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front, Lower, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Paired product: 116 050 0224
- Supplementary Article / Supplementary Info Info 2: without ball joint
- Required quantity: 1
- Replace in pairs only
- replacement in pairs recommended
- Item number: 116 050 0225
- Manufacturer: MEYLE
- EAN number: 4040074363720
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Upper, Front, Front Axle Right
- Control / Trailing Arm Type: Control Arm
- Material: Aluminium
- Supplementary Info: Quality
- Length [mm]: 269
- Paired product: 116 050 0168 / HD
- Supplementary Article / Supplementary Info Info 2: with rubber mount, with ball joint
- Required quantity: 1
- reinforced version
- Replace in pairs only
- Item number: 116 050 0167/HD
- Manufacturer: MEYLE
- EAN number: 4040074002568
- Condition: New
'Improved design for longer service life: MEYLE-HD parts 'Improved performance and service life: larger ball pin 4-year warranty on all MEYLE-HD parts. deliver enhanced durability. Compared to OE, MEYLE-HD is Engineered and quality approved in Germany. life: larger ball pin diameter of MEYLE-HD ball joint technically improved with reinforced inner parts, using distributes forces over a larger surface area and minimizes higher quality materials or optimized design solution. part wear.
- 3
- 4
- 5
- 6
- 7