BMW E87 116 d Steering hose / pipe (116 hp Diesel N47 D20 C)
- Left- / right-hand drive vehicles: for left-hand / right-hand drive vehicles
- Fitting Position: from fluid reservoir to hydraulic pump
- Item number: 58461
- Our price: 25,44 €
- Manufacturer: AIC
- EAN number: 4046283584611
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
price incl. 19% VAT
excl. delivery costs

- Fitting Position: from the oil reservoir to the hydraulic steering pump
- Item number: 8516 11016
- Our price: 27,50 €
- Manufacturer: TRISCAN
- EAN number: 5710476455062
- Condition: New
- Item number: ZV1715B
- Our price: 151,44 €
- Manufacturer: ZZVF
- EAN number: 2000000002212
- Condition: New
-
- Construction Year to: 05 / 2011
- Braking System: for vehicles with Performance brakes
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Brembo
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,9
- Height [mm]: 73,5
- Width [mm]: 164,7
- Test Mark: E1 90R-011134 / 1134
- MAPP code available
- Article number of recommended accessories: 13.0460-0238.2, 24.8190-0287.2, 24.8190-0288.2
- Observe dimensions
- Item number: 13.0460-4848.2
- Our price: 64,69 €
- Manufacturer: ATE
- EAN number: 4006633324939
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 02 / 2010, 05 / 2011
- Braking System: for vehicles without Performance brakes
- Fitting Position: Rear Axle
- Construction Year from: 03 / 2010
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,4
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 51,0
- Height 2 [mm]: 44,6
- Width 2 [mm]: 95,2
- Width 1 [mm]: 95,2
- Test Mark: E1 90R-02A0258 / 0332
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0265.2, 24.8190-0285.2
- Number of bolts / screws: 2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2713.2
- Our price: 68,96 €
- Manufacturer: ATE
- EAN number: 4006633339421
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2011
- Braking System: for vehicles without Performance brakes
- Fitting Position: Rear Axle
- Diameter [mm]: 280,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 65,5
- Surface: Coated
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 8,4
- Inner Diameter [mm]: 160,8
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0248 / 0708
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0110-0314.1
- Manufacturer: ATE
- EAN number: 4006633268189
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2011
- Braking System: for vehicles without Performance brakes
- Fitting Position: Front Axle
- Diameter [mm]: 284,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 73,3
- Surface: Coated
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 20,4
- Inner Diameter [mm]: 151,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0115 / 0229
- Bore Diameter [mm]: 16,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0122-0239.1
- Manufacturer: ATE
- EAN number: 4006633269834
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 279,8
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 65,5
- Surface: Coated
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 8,4
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,8
- Drilled: no
- Item number: 0 986 479 217
- Manufacturer: BOSCH
- EAN number: 4047024096509
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2011
- Braking System: for vehicles without Performance brakes
- Diameter [mm]: 284
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Drilled: no
- Item number: 25760
- Manufacturer: MAPCO
- EAN number: 4043605415431
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Height [mm]: 73
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Minimum thickness [mm]: 20,4
- Drilled: no
- Item number: B2013V
- Manufacturer: LPR
- EAN number: 8032928002950
- Condition: New
price incl. 19% VAT
- Diameter [mm]: 284
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Height [mm]: 73
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 20,4
- Drilled: no
- Item number: BDC5433
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069228
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 280
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Fitting Position: Rear Axle
- Height [mm]: 65,7
- Centering Diameter [mm]: 75
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 8,4
- Drilled: no
- Item number: BDC5434
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438121070
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 02 / 2010, 05 / 2011
- Braking System: for vehicles without Performance brakes
- Fitting Position: Front Axle
- Construction Year from: 03 / 2010
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,6
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 53,2
- Height 2 [mm]: 65,3
- Width [mm]: 131,3
- Test Mark: E1 90R-02A0325 / 0366, E9 90R-02A1162 / 0974
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0264.2, 24.8190-0277.2, 24.8190-0284.2
- Number of bolts / screws: 2
- Observe dimensions
- Item number: 13.0460-2710.2
- Our price: 61,11 €
- Manufacturer: ATE
- EAN number: 4006633270021
- Condition: New
-
- Construction Year to: 02 / 2010, 05 / 2011
- Braking System: for vehicles without Performance brakes
- Fitting Position: Rear Axle
- Construction Year from: 03 / 2010
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,4
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 51,0
- Height 2 [mm]: 44,6
- Width 2 [mm]: 95,2
- Width 1 [mm]: 95,2
- Test Mark: E1 90R-02A0333 / 0500
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0265.2, 24.8190-0285.2
- Number of bolts / screws: 2
- Observe dimensions
- Item number: 13.0460-2713.2
- Our price: 51,36 €
- Manufacturer: ATE
- EAN number: 4006633274708
- Condition: New
-
- Construction Year to: 02 / 2010, 05 / 2011
- Braking System: for vehicles without Performance brakes
- Fitting Position: Front Axle
- Construction Year from: 03 / 2010
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,6
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 53,2
- Height 2 [mm]: 65,3
- Width [mm]: 131,3
- Test Mark: E1 90R-02A0258 / 0276
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0264.2, 24.8190-0277.2, 24.8190-0284.2
- Number of bolts / screws: 2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2710.2
- Our price: 80,66 €
- Manufacturer: ATE
- EAN number: 4006633339407
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2011
- Braking System: for vehicles without Performance brakes
- Fitting Position: Rear Axle
- Diameter [mm]: 280,0
- Brake Disc Type: solid
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 10,0
- Height [mm]: 65,5
- Surface: Coated
- Centering Diameter [mm]: 75,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 7,6
- Inner Diameter [mm]: 160,8
- Machining: High-carbon
- MAPP code available
- Bore Diameter [mm]: 14,5
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0310-0314.1
- Manufacturer: ATE
- EAN number: 4006633335782
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
-
- Construction Year to: 05 / 2011
- Braking System: for vehicles without Performance brakes
- Fitting Position: Front Axle
- Diameter [mm]: 284,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 73,3
- Surface: Coated
- Centering Diameter [mm]: 79,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120,0
- Minimum thickness [mm]: 19,6
- Inner Diameter [mm]: 151,5
- Machining: High-carbon
- MAPP code available
- Test Mark: E1 90R-02C0858 / 1210
- Bore Diameter [mm]: 16,6
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0322-0239.1
- Manufacturer: ATE
- EAN number: 4006633332040
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 284
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Fitting Position: Front Axle
- Height [mm]: 73,1
- Surface: Coated
- Centering Diameter [mm]: 79
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 120
- Minimum thickness [mm]: 20,4
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,6
- Drilled: no
- Item number: 0 986 479 213
- Manufacturer: BOSCH
- EAN number: 4047024096479
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- Construction Year to: 06 / 2011
- Quantity Unit: Axle Set
- Brake System: Lucas-Girling
- Thickness [mm]: 16,8
- Material: Low-Metallic
- Height 1 [mm]: 65
- Height 2 [mm]: 53,3
- Width [mm]: 131,3
- WVA Number: 23916
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate, with mounting manual
- Article number of recommended accessories: 1987473045, 1987473050, 1987473058, 1987473513, 1987473524, 1987474780, 1987473548, 1987473624, 1987474154, 1987474413, 1987474469, 1987473543
- Observe technical data
- Item number: 0 986 494 120
- Our price: 37,57 €
- Manufacturer: BOSCH
- EAN number: 4047024221161
- Condition: New
-
- Fitting Position: Rear Axle
- Construction Year to: 06 / 2011
- Quantity Unit: Axle Set
- Thickness [mm]: 16,9
- Material: Low-Metallic
- Height 1 [mm]: 44,9
- Height 2 [mm]: 51
- Width [mm]: 95,4
- WVA Number: 23623
- Test Mark: ECE-R90
- Supplementary Article / Supplementary Info Info 2: with bolts / screws, with mounting manual
- Article number of recommended accessories: 1987473069, 1987474316, 1987474154, 1987473515
- Number of bolts / screws: 4
- Observe technical data
- Number of springs: 4
- Item number: 0 986 494 269
- Our price: 31,01 €
- Manufacturer: BOSCH
- EAN number: 4047024645370
- Condition: New