RENAULT Duster (HS_) 1.6 16V Steering rack (114 hp Petrol H4M 438)
- Number of mounting bores: 2
- Distance of mounting bores [mm]: 307
- Pressure Line Connection Thread Size: M16x1,5
- Backflow Connector Thread Size: M18x1,5
- Manufacturer Restriction: TRW
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles with power steering
- Observe technical data
- Overall Length [mm]: 1446,7
- Operating Mode: Hydraulic
- Item number: JRP1225
- Our price: 381,50 €
- Manufacturer: TRW
- EAN number: 3322937738441
- Condition: Remanufactured
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
- Axle Joint Thread Size: M14x1,5
- Input shaft height [mm]: 90
- Manufacturer Restriction: TRW
- Connector type: klin
- Bore Diameter [mm]: 14
- Left- / right-hand drive vehicles: for left-hand drive vehicles
- Vehicle Equipment: for vehicles without servotronic steering
- Observe technical data
- Overall Length [mm]: 1065
- Operating Mode: Hydraulic
- for shaft diameter [mm]: 16.5
- Shaft Length [mm]: 204
- Housing material: Aluminium, Steel
- Item number: RIV20249
- Our price: 237,50 €
- Manufacturer: RIVOLV
- EAN number: 5901655833829
- Condition: New
price incl. 19% VAT
- New Part
- Supplementary Article / Supplementary Info Info 2: with filter
- Operating Mode: Hydraulic
- Item number: 29107
- Our price: 244,50 €
- Manufacturer: MAPCO
- EAN number: 4043605166951
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: internally vented
- Drilled: no
- Braking / Drive Dynamics: for vehicles with ESP
- Brake Disc Thickness [mm]: 24
- Height [mm]: 44
- Centering Diameter [mm]: 68
- Minimum thickness [mm]: 21,8
- Item number: R1036V
- Manufacturer: LPR
- EAN number: 8032928096164
- Condition: New
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Braking / Drive Dynamics: for vehicles without ESP
- Thickness [mm]: 17,1
- Quantity Unit: Axle Set
- Height [mm]: 52,4
- Width [mm]: 116,3
- Test Mark: E9 90R-02A1251 / 4464, E1 90R-02A0653 / 0208
- MAPP code available
- Number of bolts / screws: 2
- Item number: 13.0460-2709.2
- Our price: 31,99 €
- Manufacturer: ATE
- EAN number: 4006633314497
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 280,0
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Braking / Drive Dynamics: for vehicles with ESP
- Brake Disc Thickness [mm]: 24,0
- Height [mm]: 44
- Centering Diameter [mm]: 68,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 21,8
- Inner Diameter [mm]: 140,0
- MAPP code available
- Test Mark: E1 90R-02C0118 / 0324
- Bore Diameter [mm]: 15,8
- Item number: 24.0124-0221.1
- Manufacturer: ATE
- EAN number: 4006633337427
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: Lucas
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws, with anti-squeak plate
- Braking / Drive Dynamics: for vehicles without ESP
- Thickness [mm]: 17
- Product line: Prime
- Quantity Unit: Axle Set
- Height [mm]: 52
- Width [mm]: 116
- WVA Number: 23973
- Item number: P 68 033
- Our price: 20,99 €
- Manufacturer: BREMBO
- EAN number: 8020584056967
- Condition: New
- Fitting Position: Front Axle
- Brake System: TRW
- Wear Warning Contact: with acoustic wear warning
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Quantity Unit: Axle Set
- Height 1 [mm]: 51,9
- Height 2 [mm]: 51,9
- Width 2 [mm]: 116,1
- Width 1 [mm]: 116,5
- Thickness 1 [mm]: 16,6
- Thickness 2 [mm]: 16,6
- WVA Number: 23973, 24403
- Test Mark: E9 90R-01823 / 754
- FMSI Code: D1491-8691 D1858-908
- Friction Lining Material: Semi-Metallic
- Item number: LP1865
- Our price: 24,49 €
- Manufacturer: DELPHI
- EAN number: 5012759281451
- Condition: New
3 Plain pads, 1 pad + spring W.I.
- Fitting Position: Front Axle
- Brake System: Lucas / TRW
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 17,1
- Quantity Unit: Axle Set
- Height [mm]: 52,4
- Width [mm]: 116,3
- Braking / Drive Dynamics: for vehicles without ESP
- Item number: 6758
- Our price: 22,49 €
- Manufacturer: MAPCO
- EAN number: 4043605407115
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,3
- Product line: COTEC
- Quantity Unit: Axle Set
- Height [mm]: 52,5
- Width [mm]: 116,4
- Test Mark: E9 90R - 01107 / 754
- Manufacturer Restriction: TRW
- Item number: GDB3332
- Our price: 23,49 €
- Manufacturer: TRW
- EAN number: 3322937334544
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator
- Braking / Drive Dynamics: for vehicles with ESP
- Supplementary Info: Q+, original equipment manufacturer quality
- Quantity Unit: Axle Set
- Height 1 [mm]: 59,5
- Height 2 [mm]: 64,6
- Width 2 [mm]: 155,2
- Width 1 [mm]: 155,1
- Thickness 1 [mm]: 18
- Thickness 2 [mm]: 18
- Weight [kg]: 1,815
- Manufacturer Restriction: ATE
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 16
- Item number: V46-0287
- Our price: 28,49 €
- Manufacturer: VAICO
- EAN number: 4046001452529
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter [mm]: 280
- Brake Disc Type: Vented
- Drilled: no
- Braking / Drive Dynamics: for vehicles with ESP
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 24
- Height [mm]: 44
- Centering Diameter [mm]: 68
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 114,3
- Minimum thickness [mm]: 21,8
- Weight [kg]: 7,28
- Brake Disc Hub Height [mm]: 20
- Packaging width [cm]: 28
- Packaging height [cm]: 9
- Packaging Depth [cm]: 28
- fulfils ECE norm: R90
- Item number: V46-80017
- Manufacturer: VAICO
- EAN number: 4046001550485
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Brake System: TRW
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height [mm]: 52,3
- Width [mm]: 116
- WVA Number: 23973
- Test Mark: R90 Homologated
- Weight [kg]: 1,5
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 10,5
- Packaging width [cm]: 10,5
- Packaging height [cm]: 4,5
- Number of threaded bolts: 4
- Item number: FDB1617
- Our price: 21,99 €
- Manufacturer: FERODO
- EAN number: 5016687328271
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with piston clip, with anti-squeak plate
- Braking / Drive Dynamics: for vehicles with ESP
- Thickness [mm]: 18
- Supplementary Info: PRIME LINE - Ring
- Product line: Prime
- Quantity Unit: Axle Set
- Height 1 [mm]: 59
- Height 2 [mm]: 65
- Width [mm]: 155
- WVA Number: 24538, 24914
- directional
- Item number: P 68 050
- Our price: 25,99 €
- Manufacturer: BREMBO
- EAN number: 8020584090817
- Condition: New
Achtung! Beläge sind an Laufrichtung gebunden. Bitte beim Einbau beachten.
- Fitting Position: Front Axle
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Quantity Unit: Axle Set
- Length [mm]: 116
- Width [mm]: 52
- Thickness 1 [mm]: 17
- Test Mark: ECE R90 Approved
- for brake disc diameter [mm]: 269
- Observe service information
- Item number: 16523
- Our price: 19,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816165231
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Construction Year to: 01 / 2018
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Quantity Unit: Axle Set
- Height 1 [mm]: 52,6
- Width 1 [mm]: 116,5
- Thickness 1 [mm]: 16,9
- Net weight [kg]: 1,19
- Item number: 222258
- Our price: 28,99 €
- Manufacturer: NK
- EAN number: 5703858636777
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: Lucas II
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with adhesive film, with bolts / screws
- Thickness [mm]: 17,3
- Quantity Unit: Axle Set
- Length [mm]: 116,4
- Height [mm]: 52,5
- Weight [kg]: 1,365
- Item number: 0987.00
- Our price: 20,99 €
- Manufacturer: REMSA
- EAN number: 8427975022844
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- Supplementary Article / Supplementary Info: with accessories, with spring
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Length [mm]: 155,2
- Height 1 [mm]: 64,7
- Height 2 [mm]: 59,4
- Item number: 1248.10
- Our price: 25,99 €
- Manufacturer: REMSA
- EAN number: 8427975031174
- Condition: New
- Fitting Position: Front Axle
- Brake System: LUCAS
- Wear Warning Contact: excl. wear warning contact, not prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,4
- Supplementary Info: Q+, original equipment manufacturer quality
- Quantity Unit: Axle Set
- Height [mm]: 52,4
- Width [mm]: 116,3
- Weight [kg]: 1,271
- Braking / Drive Dynamics: for vehicles without ABS
- Packaging width [cm]: 9
- Packaging height [cm]: 9
- Packaging Depth [cm]: 12,7
- Item number: V46-0157
- Our price: 19,99 €
- Manufacturer: VAICO
- EAN number: 4046001387739
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Brake System: ATE, TEVES
- Braking / Drive Dynamics: for vehicles with ESP
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Height 1 [mm]: 64,8
- Width 2 [mm]: 155,1
- Item number: 05P1493
- Our price: 64,99 €
- Manufacturer: LPR
- EAN number: 8032928088008
- Condition: New