Vehicle identification number: 0710501
Mercedes CL203 C 180 2.0 Steering angle sensor (129 hp Petrol M 111.951)
- Number of connectors: 4
- Weight [kg]: 0,075
- Voltage [V]: 12
- Observe service information
- Item number: 33742
- Our price: 233,58 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816337423
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
- Vehicle Identification Number (VIN) to: F 326375
- Number of pins: 4
- Item number: 53604
- Our price: 246,33 €
- Manufacturer: AIC
- EAN number: 4046283536047
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Vehicle Identification Number (VIN) to: A 407463
- Weight [kg]: 0,075
- Supplementary Info: Q+, original equipment manufacturer quality
- Number of pins: 4
- Item number: V30-72-0751
- Our price: 325,90 €
- Manufacturer: VEMO
- EAN number: 4046001685224
- Condition: New
Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- Number of connectors: 4
- Weight [kg]: 0,075
- Voltage [V]: 12
- Observe service information
- Item number: 10 93 3742
- Our price: 374,07 €
- Manufacturer: SWAG
- EAN number: 4044688337429
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter [mm]: 278
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Fitting Position: Rear Axle
- Height [mm]: 55,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 7,3
- Inner Diameter [mm]: 164
- Bore Diameter [mm]: 13,2
- Drilled: no
- Item number: 45741
- Manufacturer: MAPCO
- EAN number: 4043605451729
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles with sports package
- Diameter [mm]: 290
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 55
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 8,3
- Test Mark: E1 90R-02C0241 / 1553
- Drilled: no
- Item number: BG3239
- Manufacturer: DELPHI
- EAN number: 5012759066904
- Condition: New
-
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 278
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Height [mm]: 54
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 7,3
- Drilled: no
- Item number: M2183P
- Manufacturer: LPR
- EAN number: 8032532071991
- Condition: New
-
- Fitting Position: Rear Axle
- Brake System: Ate
- Diameter [mm]: 290
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 55,2
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Drilled: no
- Item number: BDC4541
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593603851
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 345
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 30
- Fitting Position: Front Axle
- Height [mm]: 46,4
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 28
- Drilled: no
- Item number: BDC5516
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438158168
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,8
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 69,8
- Height 2 [mm]: 62,1
- Width [mm]: 131,1
- Test Mark: E1 90R-02A0334 / 0279
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2727.2
- Our price: 52,65 €
- Manufacturer: ATE
- EAN number: 4006633309530
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 15,3
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 72,8
- Width [mm]: 63,8
- Test Mark: E1 90R-02A0498 / 0365, E9 90R-02A1163 / 1226
- MAPP code available
- Article number of recommended accessories: 13.0460-0229.2
- Observe dimensions
- Item number: 13.0460-4064.2
- Our price: 31,88 €
- Manufacturer: ATE
- EAN number: 4006633067775
- Condition: New
-
- Fitting Position: Front Axle
- for brake disc diameter [mm]: 288
- for brake disc thickness [mm]: 25
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,8
- Product line: Ceramic
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 69,8
- Height 2 [mm]: 62,1
- Width [mm]: 131,1
- Test Mark: E1 90R-02A0258 / 0280
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2726.2
- Our price: 58,66 €
- Manufacturer: ATE
- EAN number: 4006633339469
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 278,0
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9,0
- Fitting Position: Rear Axle
- Height [mm]: 55,5
- Surface: Coated
- Centering Diameter [mm]: 67,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 7,3
- Inner Diameter [mm]: 164,0
- MAPP code available
- Test Mark: E1 90R-02C0248 / 0934
- Bore Diameter [mm]: 13,2
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0109-0114.1
- Manufacturer: ATE
- EAN number: 4006633280853
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 278
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Fitting Position: Rear Axle
- Height [mm]: 53,6
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Thickness [mm]: 9
- Minimum thickness [mm]: 7,3
- Inner Diameter [mm]: 164
- Tightening Torque [Nm]: 110
- Machining: High-carbon
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- fulfils ECE norm: ECE-R90
- Drilled: no
- Item number: C4M003ABE
- Manufacturer: ABE
- EAN number: 5900427205789
- Condition: New
- Diameter [mm]: 290
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 10,0
- Fitting Position: Rear Axle
- Height [mm]: 55,5
- Surface: Coated
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8,3
- Inner Diameter [mm]: 164
- Vehicle Equipment: for vehicles with sports package
- Bore Diameter [mm]: 13,3
- Drilled: no
- Item number: C4M011ABE
- Manufacturer: ABE
- EAN number: 5900427205826
- Condition: New
-
- Fitting Position: Front Axle
- Vehicle Equipment: for vehicles without sports package
- Diameter [mm]: 288
- Brake Disc Type: internally vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Minimum thickness [mm]: 22,4
- Drilled: no
- Item number: M2601V
- Manufacturer: LPR
- EAN number: 8032532072219
- Condition: New
-
- Fitting Position: Front Axle
- Rim Size [inch]: 15.0
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 46,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Drilled: no
- Item number: BDC4539
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583498
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- Brake System: Ate
- Diameter [mm]: 278
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 9
- Height [mm]: 53,5
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 13,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 7,3
- Drilled: no
- Item number: BDC4673
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583764
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for brake disc diameter [mm]: 288
- for brake disc thickness [mm]: 25
- Fitting Position: Front Axle
- Quantity Unit: Axle Set
- Brake System: Lucas / TRW
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 19,8
- Supplementary Article / Supplementary Info: with accessories
- Height 1 [mm]: 69,8
- Height 2 [mm]: 62,1
- Width [mm]: 131,1
- Test Mark: E1 90R-02A0334 / 0279, E9 90R-02A1162 / 0349
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- MAPP code available
- Article number of recommended accessories: 24.8190-0410.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2726.2
- Our price: 41,17 €
- Manufacturer: ATE
- EAN number: 4006633309523
- Condition: New
- Quantity Unit: Axle Set
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 15,3
- Product line: Ceramic
- Fitting Position: Rear Axle
- Supplementary Article / Supplementary Info: with accessories
- Height [mm]: 72,8
- Width [mm]: 63,8
- Test Mark: E1 90R-02A0258 / 0367
- MAPP code available
- Article number of recommended accessories: 13.0460-0229.2
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-4064.2
- Our price: 43,99 €
- Manufacturer: ATE
- EAN number: 4006633339759
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.