BMW E30 Touring 320i 2.0 Sway bar (126 hp Petrol M20 B20 (206KA))
- Fitting Position: Front Axle
- Diameter [mm]: 20
- adjustable: can be adjusted three times
- Stabiliser Bar Type: Solid Stabiliser Bar
- Item number: AS2003320VA
- Our price: 219,00 €
- Manufacturer: EIBACH
- EAN number: 4050278087537
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 16
- adjustable: can be adjusted three times
- Stabiliser Bar Type: Solid Stabiliser Bar
- Item number: AS2003320HA
- Our price: 219,00 €
- Manufacturer: EIBACH
- EAN number: 4050278087506
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- Observe service information
- Registration Type: with certificate
- Vehicle Equipment: for vehicles without level control
- Product line: Anti-Roll-Kit
- Item number: E2003-320
- Our price: 371,50 €
- Manufacturer: EIBACH
- EAN number: 4050278009928
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
- Fitting Position: Front Axle, Rear Axle
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Diameter [mm]: 22, 18
- adjustable: can be adjusted three times, can be adjusted twice
- Quantity Unit: Kit
- Stabiliser Bar Type: Tubular Stabiliser Bar
- Stabiliser Diameter [mm]: 22, 18
- Vehicle type: 3 / 1, 3 / R
- Item number: 33577-1
- Our price: 392,50 €
- Manufacturer: H&R
- EAN number: 4048419064134
- Condition: New
55.) When fitting H&R stabilizers use OE mounting parts if 60.) FA stabilizer may also be used without rear 61.) For cars BMW E30 without OE-rear axle stabilizer the following original BMW spare parts are needed for mounting not stabilizer. In co-packed. Check that these parts are in a like-new the H&R stabilizer (2 of each) this case vehicle might tend to understeer. condition; renew them in case they are not. retaining clip stabilizer 33551129195 hexagon screw with disc 07119915066 sway bar link 33551126932 hexagon screw 07119912501 self locking hexagon nut 07129946400 sway bar link holder 33321127717 self locking collar nut 31331092887
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 35,2
- Centering Diameter [mm]: 66
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 20,4
- Item number: BDC3480
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593007390
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: ATE
- Material: Low-Metallic
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Thickness [mm]: 16
- Quantity Unit: Axle Set
- Height [mm]: 37,6
- Width [mm]: 125,2
- WVA Number: 20675
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474032, 1987474904, 1987474903, 1987474128
- Observe technical data
- Item number: 0 986 466 751
- Our price: 22,49 €
- Manufacturer: BOSCH
- EAN number: 4047024022973
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 10
- Height [mm]: 60,1
- Centering Diameter [mm]: 62
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,5
- Item number: 0 986 478 034
- Manufacturer: BOSCH
- EAN number: 3165141023558
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Machining: High-carbon
- Brake Disc Thickness [mm]: 22
- Height [mm]: 35,3
- Centering Diameter [mm]: 66
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 20,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 14,5
- Item number: 0 986 478 036
- Manufacturer: BOSCH
- EAN number: 3165141102680
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: Lucas-Girling
- Material: Low-Metallic
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 52
- Width [mm]: 95
- WVA Number: 21173
- Test Mark: ECE-R90
- Article number of recommended accessories: 1987474905
- Observe technical data
- Item number: 0 986 491 730
- Our price: 18,49 €
- Manufacturer: BOSCH
- EAN number: 4047024022874
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Article number of recommended accessories: 82028800
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 37,6
- Width [mm]: 125,4
- WVA Number: 20675
- Weight [kg]: 0,7
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2067502
- Our price: 23,99 €
- Manufacturer: TEXTAR
- EAN number: 5025427710863
- Condition: New
- Fitting Position: Front Axle
- Brake System: Lucas
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Article number of recommended accessories: 98008300
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 51,9
- Width [mm]: 94,7
- WVA Number: 21173
- Weight [kg]: 1,1
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2117302
- Our price: 25,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722079160
- Condition: New
- Fitting Position: Front Axle
- Wear Warning Contact: excl. wear warning contact
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Height [mm]: 52
- Width [mm]: 95
- Item number: BP533
- Our price: 36,49 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593242807
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 10
- Height [mm]: 60
- Centering Diameter [mm]: 62
- Number of Holes: 4
- Minimum thickness [mm]: 8,4
- Tightening Torque [Nm]: 120
- Item number: 08.3947.24
- Manufacturer: BREMBO
- EAN number: 8020584013472
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 17
- Quantity Unit: Axle Set
- Height [mm]: 37,6
- Width [mm]: 125
- Item number: BP244
- Our price: 44,99 €
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593129757
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Product line: PREMIER ECO FRICTION
- Quantity Unit: Axle Set
- Height [mm]: 39
- Width [mm]: 126
- WVA Number: 20675, 20756
- Test Mark: R90 Homologated
- Weight [kg]: 0,73
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 14,986
- Packaging width [cm]: 10,668
- Packaging height [cm]: 4,572
- Item number: FDB296
- Our price: 24,49 €
- Manufacturer: FERODO
- EAN number: 5016687018578
- Condition: New
- Fitting Position: Front Axle
- Brake System: Akebono
- Wear Warning Contact: not prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with piston clip
- Product line: PREMIER
- Quantity Unit: Axle Set
- Height [mm]: 57,2
- Width [mm]: 176
- WVA Number: 24250
- Test Mark: R90 Homologated
- Weight [kg]: 2,236
- Quantity per axle: 1, 4
- Packing Type: Box
- Packaging length [cm]: 20,6
- Packaging width [cm]: 12,6
- Packaging height [cm]: 8
- Item number: FDB4002
- Our price: 48,99 €
- Manufacturer: FERODO
- EAN number: 4044197396627
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 260
- Brake Disc Type: internally vented
- Drilled: no
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Product line: Prime
- Brake Disc Thickness [mm]: 22
- Height [mm]: 35
- Centering Diameter [mm]: 66
- Number of Holes: 4
- Minimum thickness [mm]: 20,4
- Tightening Torque [Nm]: 120
- Item number: 09.4883.10
- Manufacturer: BREMBO
- EAN number: 8020584488317
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Brake Disc Thickness [mm]: 10
- Centering Diameter [mm]: 62
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Thickness [mm]: 60
- Minimum thickness [mm]: 8,4
- Number of mounting bores: 1
- Observe service information
- Item number: 04091
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816040910
- Condition: New
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: AKEBONO
- Thickness [mm]: 19,1
- Quantity Unit: Axle Set
- Length [mm]: 176
- Height [mm]: 57,2
- WVA Number: 24250
- Test Mark: ECE R90 APPROVED
- Brake Type: Disc Brake
- for OE number: 05080868AA
- Item number: PA-018AF
- Our price: 48,99 €
- Manufacturer: JAPANPARTS
- EAN number: 8033001304572
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 258
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 10
- Height [mm]: 60,1
- Centering Diameter [mm]: 62
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8,4
- Weight [kg]: 4,462
- Brake Disc Hub Height [mm]: 50
- Packaging width [cm]: 26
- Packaging height [cm]: 12
- Packaging Depth [cm]: 26
- fulfils ECE norm: R90
- Item number: V20-40019
- Manufacturer: VAICO
- EAN number: 4046001184284
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.