Vehicle identification number: 0603AMY
Passat B6 Variant 1.8 TSI Sport suspension (160 hp Petrol CDAA)
- for components see parts list
- Lowered Suspension [mm]: 40
- Axle Load front axle to [kg]: 1069
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: 40, 30
- Vehicle type: 3T, 3C(B6 / B7 / 362), 3CC(357 / 358)
- Colour: white
- Item number: 29162-3
- Our price: 211,82 €
- Manufacturer: H&R
- EAN number: 4048419022820
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- for components see parts list
- Axle Load front axle from [kg]: 1070
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Fitting Position: Front Axle, Rear Axle
- Quantity Unit: Set
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: min 20, max 40
- Vehicle type: 3T, 3C(B6 / B7 / 362), 3C(362), 3CC(357 / 358)
- Colour: white
- Item number: 29162-4
- Our price: 211,82 €
- Manufacturer: H&R
- EAN number: 4048419022837
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- EG type approval number to: e1*2001 / 116*0307*36
- Axle Load rear axle to [kg]: 1160
- Axle Load front axle to [kg]: 1180
- Product line: Pro-Kit
- Vehicle Equipment: for vehicles without level control
- Registration Type: with General Operating Permit (ABE)
- Item number: E10-85-016-04-22
- Our price: 246,23 €
- Manufacturer: EIBACH
- EAN number: 4050278007962
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Lowered rear axle [mm]: 40
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Vehicle Equipment: for vehicles without level control
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle from [kg]: 1066
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-7
- Our price: 668,30 €
- Manufacturer: H&R
- EAN number: 4048419059437
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Lowered rear axle [mm]: 40
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Vehicle Equipment: for vehicles without level control
-
- Axle Load rear axle from [kg]: 1031
-
- Axle Load front axle to [kg]: 1065
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle from [kg]: 1031
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-8
- Our price: 668,30 €
- Manufacturer: H&R
- EAN number: 4048419059444
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Lowered rear axle [mm]: 40
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Vehicle Equipment: for vehicles without level control
-
- Axle Load rear axle from [kg]: 1031
-
- Axle Load front axle from [kg]: 1066
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle from [kg]: 1031
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-9
- Our price: 668,30 €
- Manufacturer: H&R
- EAN number: 4048419059451
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Lowered rear axle [mm]: 40
-
- Suspension: for vehicles without electronic suspension control
-
- Pipe Diameter [mm]: 55
-
- Registration Type: with TÜV® certificate
-
- Vehicle Equipment: for vehicles without level control
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle to [kg]: 1065
-
- Lowered front axle [mm]: 55
- Fitting Position: Front Axle, Rear Axle
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P+8PA, 5P+5PN, 5P, 1Z, 1F, 1K, 1KP, 1KM, 3C, 3CC, 3c
- Quantity Unit: Set
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-2
- Our price: 672,15 €
- Manufacturer: H&R
- EAN number: 4048419059383
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Lowered rear axle [mm]: 40
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Vehicle Equipment: for vehicles without level control
-
- Axle Load rear axle from [kg]: 1031
-
- Axle Load front axle to [kg]: 1065
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle from [kg]: 1031
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-4
- Our price: 672,15 €
- Manufacturer: H&R
- EAN number: 4048419059406
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Lowered rear axle [mm]: 40
-
- Suspension: for vehicles without electronic suspension control
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Vehicle Equipment: for vehicles without level control
-
- Axle Load rear axle from [kg]: 1031
-
- Axle Load front axle from [kg]: 1066
-
- Lowered front axle [mm]: 55
- Fitting Position: Front Axle, Rear Axle
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle from [kg]: 1031
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Design: Suspension Strut
- Vehicle type: 1Z, 3T, 3C, 3c
- Quantity Unit: Set
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-5
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419059413
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Lowered rear axle [mm]: 40
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 55
-
- Vehicle Equipment: for vehicles without level control
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle from [kg]: 1066
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-3
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419059390
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Lowered rear axle [mm]: 40
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Vehicle Equipment: for vehicles without level control
-
- Axle Load rear axle to [kg]: 1030
-
- Axle Load front axle to [kg]: 1065
-
- Lowered front axle [mm]: 55
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-6
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419059420
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 30
- Vehicle Equipment: for vehicles without level control
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Axle Load rear axle to [kg]: 1160
- Axle Load front axle to [kg]: 1070
- Product line: B12 Pro-Kit
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Item number: E90-85-016-03-22
- Our price: 917,49 €
- Manufacturer: EIBACH
- EAN number: 4050278034098
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 25
- Vehicle Equipment: for vehicles without level control
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Suspension: for vehicles without electronic suspension control
- Axle Load rear axle to [kg]: 1160
- Axle Load front axle to [kg]: 1180
- Product line: B12 Pro-Kit
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Item number: E90-85-016-04-22
- Our price: 917,49 €
- Manufacturer: EIBACH
- EAN number: 4050278034104
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension ca. [mm]: 35-70
- Axle Load rear axle to [kg]: 1250
-
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-70
- Axle Load front axle to [kg]: 1180
-
- Observe service information
- Axle Load rear axle to [kg]: 1250
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-016-04-22
- Our price: 954,12 €
- Manufacturer: EIBACH
- EAN number: 4050278037501
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Suspension: for vehicles without electronic suspension control
-
- Registration Type: with TÜV® certificate
-
- Pipe Diameter [mm]: 50
-
- Vehicle Equipment: for vehicles without level control
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 40
-
- Lowered front axle to [mm]: 60
-
- Lowered front axle from [mm]: 30, 40
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Vehicle Equipment: for vehicles without level control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 29258-5
- Our price: 1116,10 €
- Manufacturer: H&R
- EAN number: 4048419026712
- Condition: New
Not for cars with electronic damper control. Only for cars without self-levelling Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific technical notes!
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Pipe Diameter [mm]: 55
-
- Suspension: for vehicles without electronic suspension control
-
- Registration Type: with TÜV® certificate
-
- Vehicle Equipment: for vehicles without level control
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 40
-
- Lowered front axle from [mm]: 30
- Lowered front axle to [mm]: 60
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Vehicle Equipment: for vehicles without level control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 29258-4
- Our price: 1127,97 €
- Manufacturer: H&R
- EAN number: 4048419026705
- Condition: New
Not for cars with electronic damper control. Only for cars without self-levelling Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific technical notes!
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Pipe Diameter [mm]: 55
-
- Registration Type: with TÜV® certificate
-
- Vehicle Equipment: for vehicles without level control
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 30
-
- Lowered front axle to [mm]: 70
-
- Lowered front axle from [mm]: 40
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Lowered front axle to [mm]: 70
- Lowered front axle from [mm]: 40
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 35258-3
- Our price: 1263,25 €
- Manufacturer: H&R
- EAN number: 4048419110411
- Condition: New
Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific technical notes!
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Pipe Diameter [mm]: 50
-
- Registration Type: with TÜV® certificate
-
- Vehicle Equipment: for vehicles without level control
-
- Lowered rear axle to [mm]: 60
-
- Lowered rear axle from [mm]: 30
-
- Lowered front axle to [mm]: 70
-
- Lowered front axle from [mm]: 40
- Lowered rear axle from [mm]: 30
- Lowered rear axle to [mm]: 60
- Lowered front axle to [mm]: 70
- Lowered front axle from [mm]: 40
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 35258-4
- Our price: 1263,25 €
- Manufacturer: H&R
- EAN number: 4048419110428
- Condition: New
Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific technical notes!
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Lowered rear axle [mm]: 30
- Lowered front axle [mm]: 30
- Follow installation instructions
- Quantity Unit: Set
- Fitting Position: Front Axle, Rear Axle
- Surface: Phosphatized
- Quantity: 4
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate, with GOCA certificate
- Colour: red
- Material: Spring Steel
- Item number: IA 62304
- Our price: 145,50 €
- Manufacturer: AutoStyle
- EAN number: 8714767342076
- Condition: New
price incl. 19% VAT
-
- Fitting Position: Rear Axle
- Lowered Suspension [mm]: 30
- Axle Load rear axle to [kg]: 1100
-
- Fitting Position: Front Axle
- Lowered Suspension [mm]: 30
- Axle Load front axle to [kg]: 1100
- Shock Absorber Type: Oil Pressure
- Registration Type: with TÜV® certificate
- Item number: 123280194
- Our price: 557,25 €
- Manufacturer: METZGER
- EAN number: 4250173378987
- Condition: New
Set (VA+HA)
- 1
- 2