W202 C 280 2.8 Sport suspension (193 hp Petrol M 104.941)

Please note additional information and vehicle-specific technical notes!

Please note additional information and vehicle-specific technical notes!

Please note additional information and vehicle-specific technical notes!

Please note additional information and vehicle-specific technical notes!

Please note additional information and vehicle-specific technical notes!

Please note additional information and vehicle-specific technical notes!

11.) In order to achieve the indicated lowering the 12.) Vehicles fitted with BMW M-Technic, MB-Sportsline, 20.) For vehicles with factory mounted trailer coupling we 22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup 3.) On models up to year 12/95 the rubber-pads from models Please note additional information and vehicle-specific 1/96-up have to be used and Audi recommend a stronger rear spring ( 29749-3 / 29749-4). standard technical notes! dust cover if not co-packed. rubber pads should be exchanged if necessary (size 1-4). Sportsuspension etc. will show less lowering as they are already factory lowered. Check good condition of these items prior to fitment, For Mercedes W 203 (part no. 31004-1) this refers to the rear axle only. exchange if in doubt.

11.) In order to achieve the indicated lowering the 12.) Vehicles fitted with BMW M-Technic, MB-Sportsline, 22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup 7.) Vehicles with big equipment which increases the front Please note additional information and vehicle-specific and Audi axle standard technical notes! dust cover if not co-packed. load, stronger front springs shall be used. rubber pads should be exchanged if necessary (size 1-4). Sportsuspension etc. will show less lowering as they are already factory lowered. Check good condition of these items prior to fitment, For Mercedes W 203 (part no. 31004-1) this refers to the rear axle only. exchange if in doubt.

11.) In order to achieve the indicated lowering the 12.) Vehicles fitted with BMW M-Technic, MB-Sportsline, 22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup 7.) Vehicles with big equipment which increases the front For cars with special equipment. Please note additional information and vehicle-specific and Audi axle standard technical notes! dust cover if not co-packed. load, stronger front springs shall be used. rubber pads should be exchanged if necessary (size 1-4). Sportsuspension etc. will show less lowering as they are already factory lowered. Check good condition of these items prior to fitment, For Mercedes W 203 (part no. 31004-1) this refers to the rear axle only. exchange if in doubt.

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC

spring pads must be observed

Set (VA+HA)