Vehicle identification number: 0588860
Audi A3 8P Sportback 2.0 TFSI Sport suspension (200 hp Petrol BPY)
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1065
- Product line: Pro-Kit
- Suspension: for vehicles without electronic suspension control
- Vehicle Equipment: for vehicles without level control
- Registration Type: with General Operating Permit (ABE)
- Item number: E10-15-007-06-22
- Our price: 215,28 €
- Manufacturer: EIBACH
- EAN number: 4050278000963
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1155
- Product line: Pro-Kit
- Suspension: for vehicles without electronic suspension control
- Vehicle Equipment: for vehicles without level control
- Registration Type: with General Operating Permit (ABE)
- Item number: E10-15-007-07-22
- Our price: 215,28 €
- Manufacturer: EIBACH
- EAN number: 4050278000970
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-40
-
- Observe service information
- Lowered Suspension ca. [mm]: 45-50
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1130
- Product line: Sportline
- Vehicle Equipment: for vehicles without level control
- Registration Type: with General Operating Permit (ABE)
- Item number: E20-15-007-04-22
- Our price: 223,92 €
- Manufacturer: EIBACH
- EAN number: 4050278009034
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- for components see parts list
- Lowered Suspension [mm]: 35
- Axle Load front axle to [kg]: 1020
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Quantity Unit: Set
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: min 30, max 45
- Vehicle type: 8P, 5P, 1Z, 1K, 1KM, 1KP
- Item number: 29261-1
- Our price: 198,72 €
- Manufacturer: H&R
- EAN number: 4048419026927
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- for components see parts list
- Lowered Suspension [mm]: 35
- Axle Load front axle from [kg]: 1021
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Quantity Unit: Set
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: min 30, max 45
- Vehicle type: 8P, 5P, 1Z, 1K, 1KM, 1KP
- Item number: 29261-2
- Our price: 198,72 €
- Manufacturer: H&R
- EAN number: 4048419026934
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- for components see parts list
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Quantity Unit: Set
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: 45-50
- Vehicle type: 8P, 5P, 1Z, 1K, 1KM
- Item number: 29260-1
- Our price: 230,53 €
- Manufacturer: H&R
- EAN number: 4048419026866
- Condition: New
low Version
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Pipe Diameter [mm]: 50
- Axle Load front axle to [kg]: 1020
- Lowered Suspension [mm]: 35
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Follow installation instructions
- Item number: 40261-3
- Our price: 661,60 €
- Manufacturer: H&R
- EAN number: 4048419070432
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Pipe Diameter [mm]: 50
- Axle Load front axle from [kg]: 1021
- Lowered Suspension [mm]: 35
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Follow installation instructions
- Item number: 40261-4
- Our price: 661,60 €
- Manufacturer: H&R
- EAN number: 4048419070449
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Registration Type: with TÜV® certificate
- Suspension: for vehicles without electronic suspension control
- Pipe Diameter [mm]: 50
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Follow installation instructions
- Item number: 31043-7
- Our price: 668,30 €
- Manufacturer: H&R
- EAN number: 4048419059437
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Suspension: for vehicles without electronic suspension control
- Pipe Diameter [mm]: 50
- Registration Type: with TÜV® certificate
- Lowered Suspension to [mm]: 50
-
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Follow installation instructions
- Item number: 40260-2
- Our price: 668,30 €
- Manufacturer: H&R
- EAN number: 4048419070401
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- Registration Type: with TÜV® certificate
- Lowered rear axle [mm]: 40
- Suspension: for vehicles without electronic suspension control
- Pipe Diameter [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Lowered front axle [mm]: 55
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P+8PA, 5P+5PN, 5P, 1Z, 1F, 1K, 1KP, 1KM, 3C, 3CC, 3c
- Quantity Unit: Set
- for components see parts list
- Spring Design: Coil Spring
- Follow installation instructions
- Item number: 31043-2
- Our price: 672,15 €
- Manufacturer: H&R
- EAN number: 4048419059383
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Registration Type: with TÜV® certificate
- Suspension: for vehicles without electronic suspension control
- Pipe Diameter [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Follow installation instructions
- Item number: 31043-3
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419059390
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Registration Type: with TÜV® certificate
- Suspension: for vehicles without electronic suspension control
- Pipe Diameter [mm]: 50
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Follow installation instructions
- Item number: 31043-6
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419059420
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Suspension: for vehicles without electronic suspension control
- Pipe Diameter [mm]: 55
- Registration Type: with TÜV® certificate
- Lowered Suspension to [mm]: 50
-
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Follow installation instructions
- Item number: 40260-1
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419070395
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Pipe Diameter [mm]: 55
- Axle Load front axle to [kg]: 1020
- Lowered Suspension [mm]: 35
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Follow installation instructions
- Item number: 40261-1
- Our price: 674,07 €
- Manufacturer: H&R
- EAN number: 4048419070418
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- Axle Load front axle from [kg]: 1021
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Pipe Diameter [mm]: 55
- Lowered Suspension [mm]: 35
- Suspension Strut Outer Diameter [mm]: 55
- Lowered Suspension ca. [mm]: 35
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P, 5P, 1Z, 1K, 1KP, 1KM
- Quantity Unit: Kit
- for components see parts list
- Spring Design: Coil Spring
- Follow installation instructions
- Item number: 40261-2
- Our price: 674,73 €
- Manufacturer: H&R
- EAN number: 4048419070425
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle, Front Axle
-
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- for RPO number: DQ058
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Item number: 1140-2611
- Our price: 874,93 €
- Manufacturer: KONI
- EAN number: 8712167134451
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle, Front Axle
-
- Axle Load front axle from [kg]: 1021
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- for RPO number: DQ059
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 55
- Item number: 1140-2612
- Our price: 874,93 €
- Manufacturer: KONI
- EAN number: 8712167134468
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle, Front Axle
-
- Axle Load front axle to [kg]: 1020
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- for RPO number: DQ060
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 50
- Item number: 1140-2613
- Our price: 874,93 €
- Manufacturer: KONI
- EAN number: 8712167134475
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Rear Axle, Front Axle
-
- Axle Load front axle from [kg]: 1021
- Lowered front axle to [mm]: 35
- Lowered rear axle to [mm]: 35
- for RPO number: DQ061
- Shock Absorber System: Twin-Tube, adjustable
- Housing diameter in clamping area [mm]: 50
- Item number: 1140-2614
- Our price: 874,93 €
- Manufacturer: KONI
- EAN number: 8712167134482
- Condition: New
Front: for original struts only Front: for original struts Ø 55 mm only / Rear: only for car Front: OE struts only Rear: Lmax = 480mm s with torsion-beam rear suspension. Excl: HD Suspension and DCC
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- 1
- 2
- 3
- 4