Audi A3 8P Sportback 1.8 FSI Sport suspension (150 hp Petrol BPU)
- Fitting Position: Front Axle, Rear Axle
- for components see parts list
- Lowered Suspension [mm]: 35
- Axle Load front axle to [kg]: 1020
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Quantity Unit: Set
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: min 30, max 45
- Vehicle type: 8P, 5P, 1Z, 1K, 1KM, 1KP
- Item number: 29261-1
- Our price: 187,99 €
- Manufacturer: H&R
- EAN number: 4048419026927
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- for components see parts list
- Lowered Suspension [mm]: 35
- Axle Load front axle from [kg]: 1021
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Follow installation instructions
- Quantity Unit: Set
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: min 30, max 45
- Vehicle type: 8P, 5P, 1Z, 1K, 1KM, 1KP
- Item number: 29261-2
- Our price: 199,49 €
- Manufacturer: H&R
- EAN number: 4048419026934
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- for components see parts list
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Quantity Unit: Set
- Spring Design: Coil Spring
- Lowered Suspension ca. [mm]: 45-50
- Vehicle type: 8P, 5P, 1Z, 1K, 1KM
- Item number: 29260-1
- Our price: 217,00 €
- Manufacturer: H&R
- EAN number: 4048419026866
- Condition: New
low Version
price incl. 19% VAT
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1065
- Product line: Pro-Kit
- Suspension: for vehicles without electronic suspension control
- Vehicle Equipment: for vehicles without level control
- Registration Type: with General Operating Permit (ABE)
- Item number: E10-15-007-06-22
- Our price: 190,49 €
- Manufacturer: EIBACH
- EAN number: 4050278000963
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Observe service information
- Lowered Suspension ca. [mm]: 30
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1155
- Product line: Pro-Kit
- Suspension: for vehicles without electronic suspension control
- Vehicle Equipment: for vehicles without level control
- Registration Type: with General Operating Permit (ABE)
- Item number: E10-15-007-07-22
- Our price: 190,49 €
- Manufacturer: EIBACH
- EAN number: 4050278000970
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-40
-
- Observe service information
- Lowered Suspension ca. [mm]: 45-50
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1130
- Product line: Sportline
- Vehicle Equipment: for vehicles without level control
- Registration Type: with General Operating Permit (ABE)
- Item number: E20-15-007-04-22
- Our price: 197,99 €
- Manufacturer: EIBACH
- EAN number: 4050278009034
- Condition: New
price incl. 19% VAT
- Axle Load front axle to [kg]: 1020
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Lowered Suspension [mm]: 35
- Follow installation instructions
- Item number: 40261-3
- Our price: 576,00 €
- Manufacturer: H&R
- EAN number: 4048419070432
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-7
- Our price: 585,50 €
- Manufacturer: H&R
- EAN number: 4048419059437
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 40260-2
- Our price: 585,50 €
- Manufacturer: H&R
- EAN number: 4048419070401
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P+8PA, 5P+5PN, 5P, 1Z, 1F, 1K, 1KP, 1KM, 3C, 3CC, 3c
- Quantity Unit: Set
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-2
- Our price: 588,50 €
- Manufacturer: H&R
- EAN number: 4048419059383
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle from [kg]: 1066
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-3
- Our price: 590,50 €
- Manufacturer: H&R
- EAN number: 4048419059390
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Lowered rear axle [mm]: 40
- Lowered front axle [mm]: 55
- Axle Load rear axle to [kg]: 1030
- Axle Load front axle to [kg]: 1065
- Suspension Strut Outer Diameter [mm]: 50
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 31043-6
- Our price: 590,50 €
- Manufacturer: H&R
- EAN number: 4048419059420
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 50 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Lowered Suspension from [mm]: 45
- Lowered Suspension to [mm]: 50
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate
- Follow installation instructions
- Item number: 40260-1
- Our price: 590,50 €
- Manufacturer: H&R
- EAN number: 4048419070395
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup low Version Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Axle Load front axle to [kg]: 1020
- Suspension Strut Outer Diameter [mm]: 55
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Lowered Suspension [mm]: 35
- Follow installation instructions
- Item number: 40261-1
- Our price: 590,50 €
- Manufacturer: H&R
- EAN number: 4048419070418
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle, Rear Axle
- Axle Load front axle from [kg]: 1021
- Suspension Strut Outer Diameter [mm]: 55
- Lowered Suspension ca. [mm]: 35
- Shock Absorber Design: Suspension Strut
- Vehicle type: 8P, 5P, 1Z, 1K, 1KP, 1KM
- Quantity Unit: Kit
- for components see parts list
- Suspension: for vehicles without electronic suspension control
- Spring Design: Coil Spring
- Registration Type: with TÜV® certificate, with General Operating Permit (ABE)
- Lowered Suspension [mm]: 35
- Follow installation instructions
- Item number: 40261-2
- Our price: 591,00 €
- Manufacturer: H&R
- EAN number: 4048419070425
- Condition: New
22.) Cup-Kit shock absorbers: Use OE bump-stop, spring-cup Not for cars with electronic damper control. Note DCC: The installation of this suspension into cars Only for FA-strut clamp ø 55 mm Please note additional information and vehicle-specific and technical notes! with an electronic damping adjustment (DCC , Magnetic Ride dust cover if not co-packed. etc.) must be done in an authorized (Audi - , VW-, etc.) Check good condition of these items prior to fitment, workshop. The signal of the electronic damping adjustment exchange if in doubt. in the display has to be deactivated (e.g. by interference-free complex resistance plugs which are connected to the valve connectors of the front and rear damping adjustment).
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Lowered Suspension ca. [mm]: 30
- for PR number: G08, G07
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1065
- Product line: B12 Pro-Kit
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Item number: E90-15-007-13-22
- Our price: 801,00 €
- Manufacturer: EIBACH
- EAN number: 4050278035712
- Condition: New
disconect AMM
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 30
-
- Lowered Suspension ca. [mm]: 30
- for PR number: G08, G07
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1155
- Product line: B12 Pro-Kit
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Item number: E90-15-007-19-22
- Our price: 801,00 €
- Manufacturer: EIBACH
- EAN number: 4050278035736
- Condition: New
disconect AMM
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Fitting Position: Front Axle
- Lowered Suspension ca. [mm]: 35-40
-
- Lowered Suspension ca. [mm]: 45-50
- for PR number: G07, G08
- Registration Type: Conditions see certificate, with General Operating Permit (ABE)
- Axle Load rear axle to [kg]: 1005
- Axle Load front axle to [kg]: 1130
- Product line: B12 Sportline
- Suspension Strut Outer Diameter [mm]: 55
- Shock Absorber System: Monotube
- Shock Absorber Type: Gas Pressure
- Item number: E95-15-007-08-22
- Our price: 899,50 €
- Manufacturer: EIBACH
- EAN number: 4050278035880
- Condition: New
disconect AMM
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Observe service information
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 1035
- Axle Load rear axle to [kg]: 1150
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-014-01-22
- Our price: 966,00 €
- Manufacturer: EIBACH
- EAN number: 4050278018364
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
-
- Observe service information
- Lowered Suspension ca. [mm]: 35-65
- Axle Load front axle to [kg]: 1105
- Axle Load rear axle to [kg]: 1150
- Product line: Pro-Street-S
- Suspension Strut Outer Diameter [mm]: 55
- Suspension: Threaded Suspension (height adjustable)
- Registration Type: with certificate
- Follow installation instructions
- Item number: PSS65-85-014-03-22
- Our price: 966,00 €
- Manufacturer: EIBACH
- EAN number: 4050278018388
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- 1
- 2