Hyundai Tucson jm 2.0 CRDi Diesel particulate filter (113 hp Diesel D4EA)

These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.

Highly efficient additive combination for cleaning of dismantled diesel particulate filters (DPF). Dissolves contamination in the DPF and regenerates its full functionality. Application: suitable for all DPF types. 1. Application ratio 1:4 with water (in case of strong contamination use 1:1 ratio). 2. Demount the DPF and fill in the cleaning liquid - approx. 3 to 5 litres (depending on the filter size). 3. Let the product take effect for approx. 8 to 10 hours. 4. Check filling level regularly and refill if necessary. 5. Empty particulate filter. 6. Thoroughly rinse the filter with clear water after the cleaning process. 7. Reassemble the diesel particulate filter and do a test drive for at least 15 min.

Highly efficient cleaning fluid for cleaning DPF. Dissolves contaminations in the diesel particulate filter and regenerates its full functionality. Application: Make sure that the exhaust system has no leaks and is working properly. 1. Dismantle the temperature and/or pressure sensors. 2. Dilute the fluid with water at a ratio of 1:3 (for heavy contamination use 1:2). 3. Fill the fluid into the air pressure pistol, apply air pressure (2.5 – 4.0 bar) and adjust pressure at the device. 4. Turn on the engine and let the idle during the cleaning. 5. Reassemble the sensors and carry out a test drive. The soot particles that have been dissolved during the cleaning process will be burnt during the regular regeneration process.