Citroen Berlingo MF 2.0 HDI Diesel particulate filter (90 hp Diesel RHY (DW10TD))

Highly effective fluid for cleaning clogged passenger car diesel particulate filters when installed. Dissolves hardened, dense and encrusted contaminants on the surface of diesel particulate filters. Secures optimum vehicle handling, engine performance and low fuel consumption. Regular cleaning in combination with flushing can help avoid expensive repairs.

Highly effective, solvent-free additive combination. Dissolves dirt and cleans diesel particulate filters when dismantled. Thus relieving you of the usual filter change, which in turn reduces operating costs.

Upstream catalytic converters must be no older than 5 Upstream catalytic converters must be no older than 5 years,have not run more than 80tkm and be free of defects. years,have not run more than 80tkm and be free of defects. Otherwise the catalytic converter must be replaced. Otherwise the catalytic converter must be replaced.



the oxidation-catalyst has to be replaced. the oxidation-catalyst has to be replaced.

Upstream catalytic converters must be no older than 5 Upstream catalytic converters must be no older than 5 years,have not run more than 80tkm and be free of defects. years,have not run more than 80tkm and be free of defects. Otherwise the catalytic converter must be replaced. Otherwise the catalytic converter must be replaced.



the oxidation-catalyst has to be replaced. the oxidation-catalyst has to be replaced.

The existing middle muffler is replaced when the The original DPF® City filter COMBI-package replaces the original DPF® City filter Combi-package is fitted series catalyst.

The connecting pipe is replaced when fitting The original DPF® City filter COMBI-package replaces the series catalyst. the original DPF® City filter Combi-package.

High-performance additive for use in all diesel aggregates to reduce soot and exhaust gas emissions and to increase engine performance. Suitable for all kind of diesel fuels.

Highly efficient additive combination for cleaning of dismantled diesel particulate filters (DPF). Dissolves contamination in the DPF and regenerates its full functionality. Application: suitable for all DPF types. 1. Application ratio 1:4 with water (in case of strong contamination use 1:1 ratio). 2. Demount the DPF and fill in the cleaning liquid - approx. 3 to 5 litres (depending on the filter size). 3. Let the product take effect for approx. 8 to 10 hours. 4. Check filling level regularly and refill if necessary. 5. Empty particulate filter. 6. Thoroughly rinse the filter with clear water after the cleaning process. 7. Reassemble the diesel particulate filter and do a test drive for at least 15 min.

Highly efficient cleaning fluid for cleaning DPF. Dissolves contaminations in the diesel particulate filter and regenerates its full functionality. Application: Make sure that the exhaust system has no leaks and is working properly. 1. Dismantle the temperature and/or pressure sensors. 2. Dilute the fluid with water at a ratio of 1:3 (for heavy contamination use 1:2). 3. Fill the fluid into the air pressure pistol, apply air pressure (2.5 – 4.0 bar) and adjust pressure at the device. 4. Turn on the engine and let the idle during the cleaning. 5. Reassemble the sensors and carry out a test drive. The soot particles that have been dissolved during the cleaning process will be burnt during the regular regeneration process.