Golf 1j5 1.9 TDI 4motion Shift valve, automatic transmission (150 hp Diesel ARL)

- Transmission Type: Automatic transmission with manual shift, Dual-Clutch Transmission
- Transmission Code: 0B5 DL501 S-tronic, 8HP 8HP55 8HP65
- Always compare old and new part (in particular OE No.)
- Weight [kg]: 0,11
- Item number: 53SKV029
- Our price: 78,49 €
- Manufacturer: ESEN SKV
- EAN number: 5906302204076
- Condition: New
- Transmission Type: Automatic Transmission
- Valve type: Solenoid Valve
- Supplementary Info: Original VEMO Quality
- Transmission Code: JF506E
- Number of pins: 1
- Socket colour: black
- Weight [kg]: 0,065
- Packaging width [cm]: 4, 3,2
- Packaging height [cm]: 6,7, 2,7
- Packaging Depth [cm]: 6,8, 4,2
- Item number: V48-77-0004
- Our price: 90,99 €
- Manufacturer: VEMO
- EAN number: 4046001885860
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs
- Transmission Type: Automatic Transmission
- Valve type: Solenoid Valve
- Supplementary Info: Original VEMO Quality
- Transmission Code: JF506E
- Number of pins: 1
- Socket colour: black
- Weight [kg]: 0,072
- Packaging width [cm]: 4,9
- Packaging height [cm]: 9,2
- Packaging Depth [cm]: 9
- Item number: V48-77-0003
- Our price: 119,49 €
- Manufacturer: VEMO
- EAN number: 4046001885853
- Condition: New
Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- for PR number: 1KE
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 9
- Height [mm]: 33,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- Test Mark: E1 90R-02C0967 / 2516
- Item number: BG3738
- Manufacturer: DELPHI
- EAN number: 5012759280355
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 280
- for PR number: 1LS, 1ZM, 1ZE
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- for article number: LP1514
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 19
- Test Mark: E1 90R-02C0964 / 2558
- Item number: BG3036
- Manufacturer: DELPHI
- EAN number: 5012759062746
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- for PR number: 1KE
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 8,9
- Height [mm]: 33,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 7
- for article number: A1592P
- Item number: A1592P
- Manufacturer: LPR
- EAN number: 8032532068748
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22
- Height [mm]: 37
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 20
- Item number: BDC4764
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593866157
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34,5
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 23
- Item number: BDC4768
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593866171
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- for PR number: 2EE, 2EL
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 36,6
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 135,0
- Bore Diameter [mm]: 15,8
- Item number: BAR22163
- Manufacturer: Barum
- EAN number: 4006633331265
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 2EE, 2EL
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2820.2
- Our price: 37,49 €
- Manufacturer: ATE
- EAN number: 4006633339483
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KE
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Product line: Ceramic
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0258 / 0193
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-2894.2
- Our price: 36,99 €
- Manufacturer: ATE
- EAN number: 4006633339629
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Brake System: ATE
- for PR number: 1ZD, 1ZE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,8
- Product line: Ceramic
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1242 / 1629
- Warning Contact Length [mm]: 145
- MAPP code available
- Spring Clip Diameter [mm]: 43
- Permissible up to vehicle capacity [kW]: 225
- Item number: 13.0470-7122.2
- Our price: 76,49 €
- Manufacturer: ATE
- EAN number: 4006633091756
- Condition: New
Technically it is possible to combine ATE Ceramic brake pads with the PowerDisc or with perforated brake discs. The brak ing power with such a pairing is the same as with an origina l ATE brake pad or OE brake pad. However, when the two compo nents interact they can generate more noise in braking. ATE Ceramic brake pads were developed for comfort-oriented drive rs. We therefore recommend using them with normal brake disc s, i.e. smooth ones.
- Fitting Position: Front Axle
- Diameter [mm]: 312
- for PR number: 1LJ
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34,2
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Test Mark: E1 90R-02C0957 / 2581
- Item number: BG3528
- Manufacturer: DELPHI
- EAN number: 5012759140611
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 256
- for PR number: 2EE
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 22
- Height [mm]: 36
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0091 / 1610
- Item number: BG3611
- Manufacturer: DELPHI
- EAN number: 5012759159798
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 34,2
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 22
- Item number: BDC4735
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583825
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 232
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 9
- Height [mm]: 39,3
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 7
- Item number: BDC4753
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593583863
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 2EE, 2EL
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0192, E1 90R-02A0650 / 0200
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2820.2
- Our price: 25,99 €
- Manufacturer: ATE
- EAN number: 4006633289542
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KE
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,2
- Quantity Unit: Axle Set
- Height [mm]: 52,9
- Width [mm]: 87,6
- Test Mark: E1 90R-02A0333 / 0221, E1 90R-02A0650 / 0200
- MAPP code available
- Article number of recommended accessories: 13.0460-0072.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2894.2
- Our price: 27,49 €
- Manufacturer: ATE
- EAN number: 4006633201643
- Condition: New
- Fitting Position: Front Axle
- Brake System: ATE
- for PR number: 1ZD, 1ZE
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 19,8
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 1
- Height [mm]: 74,0
- Width [mm]: 156,3
- Thickness 2 [mm]: 20,3
- Test Mark: E9 90R-02A1259 / 1629
- Warning Contact Length [mm]: 145
- MAPP code available
- Spring Clip Diameter [mm]: 43
- Item number: 13.0460-7122.2
- Our price: 55,49 €
- Manufacturer: ATE
- EAN number: 4006633058230
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 239
- for PR number: 1KE
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Brake Disc Thickness [mm]: 8,9
- Height [mm]: 33,4
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 100,0
- Minimum thickness [mm]: 7,0
- Inner Diameter [mm]: 132,5
- MAPP code available
- Test Mark: E1 90R-02C0165 / 1150
- Bore Diameter [mm]: 15,8
- Item number: 24.0109-0133.1
- Manufacturer: ATE
- EAN number: 4006633031509
- Condition: New
price incl. 19% VAT
excl. delivery costs