OPEL Astra F Classic Caravan (T92) 1.6 i Sensor, wash water level (75 hp Petrol X 16 SZR)
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Voltage [V]: 12
- Rated Power [W]: 1,2
- Number of connectors: 2
- Corresponds to the original part in colour: black
- Combi Switch Function: Normally Open Contact
- Plug Type: Blade Terminal
- Assy. / disassy. by qualified personnel required!
- Item number: 6PR 005 345-031
- Our price: 28,49 €
- Manufacturer: HELLA
- EAN number: 4082300132151
- Condition: New
*** HELLA Electronics OE competence for over 60 years.
- Number of pins: 2
- Connector Shape: oval
- for OE number: 90346055
- Material: Plastic
- Item number: 150097310
- Our price: 8,59 €
- Manufacturer: AUTOMEGA
- EAN number: 4053184345227
- Condition: New
- Number of connectors: 2
- Length [mm]: 87
- Colour: black, white
- Item number: OP980026
- Our price: 11,49 €
- Manufacturer: hajus Autoteile
- EAN number: 9800260000014
- Condition: New
- Length [mm]: 87
- Number of connectors: 2
- Colour: black, white
- Weight [kg]: 0,02
- Item number: 38943
- Our price: 12,49 €
- Manufacturer: FEBI BILSTEIN
- EAN number: 4027816389439
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Length [mm]: 87
- Number of connectors: 2
- Colour: black, white
- Weight [kg]: 0,02
- Item number: 40 93 8943
- Our price: 18,99 €
- Manufacturer: SWAG
- EAN number: 4044688389435
- Condition: New
These products are designed to be used as originally These products are designed to be used as originally intended and not modified for purpose. Please ensure the intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Diameter: 240
- Construction Year to: 08 / 2002
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness: 10
- Height: 42
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Minimum thickness [mm]: 8
- Test Mark: E1 90R-02C0967 / 2594
- Item number: BG3403
- Manufacturer: DELPHI
- EAN number: 5012759086483
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 256
- Construction Year to: 03 / 2004
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness: 24
- Height: 41
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 21
- Test Mark: E1 90R-02C0277 / 1786
- Item number: BG3404
- Manufacturer: DELPHI
- EAN number: 5012759086490
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 236
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness: 20
- Height: 41
- Centering Diameter [mm]: 60,1
- Number of Holes: 4
- Minimum thickness [mm]: 17
- Test Mark: E4 90R-02C0703 / 2623
- Item number: BG2278
- Manufacturer: DELPHI
- EAN number: 5012759422779
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Quantity Unit: Axle Set
- Height: 63,0
- Width [mm]: 160,0
- Test Mark: ECE R-90
- Brake Disc Thickness: 17,5
- Production Number: 6001640
- Item number: 6001640
- Our price: 26,49 €
- Manufacturer: KRAFT
- EAN number: 5901159122610
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Lucas II
- Wear Warning Contact: incl. wear warning contact
- Quantity Unit: Axle Set
- Height: 42,3
- Width [mm]: 95,3
- Test Mark: ECE R-90
- Brake Disc Thickness: 15,2
- Production Number: 6001650
- Item number: 6001650
- Our price: 16,99 €
- Manufacturer: KRAFT
- EAN number: 5900427194434
- Condition: New
- Fitting Position: Front Axle
- Diameter: 236
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness: 12,6
- Height: 41,2
- Centering Diameter [mm]: 108
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 10,7
- Item number: BDC3388
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593007147
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 236
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness: 20
- Height: 41
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 18,2
- Item number: BDC3205
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593006355
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 256
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness: 23,9
- Height: 41
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 21
- Item number: BDC3680
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593240384
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 236
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness: 20
- Height: 41
- Centering Diameter [mm]: 60
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 17
- Weight [kg]: 4,542
- Brake Disc Hub Height [mm]: 21,2
- Packaging width [cm]: 24
- Packaging height [cm]: 9
- Packaging Depth [cm]: 24
- Item number: V51-80003
- Manufacturer: VAICO
- EAN number: 4046001549816
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Diameter: 280
- Construction Year from: 04 / 2004
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness: 25
- Height: 42
- Centering Diameter [mm]: 70
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Item number: BG3405
- Manufacturer: DELPHI
- EAN number: 5012759086506
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 264
- Construction Year from: 04 / 2004
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness: 10
- Height: 42
- Centering Diameter [mm]: 65,5
- Number of Holes: 5
- Minimum thickness [mm]: 8
- Test Mark: E4 90R-02C0747 / 2816
- Item number: BG3406
- Manufacturer: DELPHI
- EAN number: 5012759086513
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 280
- Construction Year from: 04 / 2004
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness: 25
- Height: 43,2
- Centering Diameter [mm]: 60
- Number of Holes: 4
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0957 / 2551
- Item number: BG3989
- Manufacturer: DELPHI
- EAN number: 5012759370292
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter: 260
- Brake Disc Type: solid
- Drilled: no
- not for country specific design: China (Taiwan)
- Brake Disc Thickness: 10
- Height: 69,5
- Centering Diameter [mm]: 57
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 8
- Item number: BDC3827
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593256637
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter: 236
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness: 20
- Height: 41
- Centering Diameter [mm]: 59
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Minimum thickness [mm]: 18
- No. of holes 2: 6
- Brake Disc Hub Height [mm]: 21
- Packaging width [cm]: 24
- Packaging height [cm]: 9
- Packaging Depth [cm]: 24
- Item number: V51-80005
- Manufacturer: VAICO
- EAN number: 4046001551420
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Thickness: 16,5
- Quantity Unit: Axle Set
- Height 1 [mm]: 48,4
- Height 2 [mm]: 58,3
- Width 2 [mm]: 140,0
- Width 1 [mm]: 141,2
- Test Mark: E1 90R-01067 / 071
- MAPP code available
- Article number of recommended accessories: 24.8190-0707.2
- Observe dimensions
- Item number: 13.0460-7051.2
- Our price: 23,99 €
- Manufacturer: ATE
- EAN number: 4006633128094
- Condition: New