BMW 1 Hatchback (F40) 120 d Sender unit, interior temperature (190 hp Diesel B47 C20 B)
- Number of pins: 2
- Connector Shape: rectangular, angled
- Vehicle Equipment: for vehicles with air conditioning
- Housing Colour: black
- Mounting Type: Clipped
- Item number: 502 531
- Our price: 7,29 €
- Manufacturer: TOPRAN
- EAN number: 1076290000012
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
- Number of pins: 2
- Connector Shape: rectangular, angled
- Vehicle Equipment: for vehicles with air conditioning
- Mounting Type: Clipped
- Item number: 502 807
- Our price: 11,99 €
- Manufacturer: TOPRAN
- EAN number: 4063926375511
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Number of pins: 2
- Item number: 20716
- Our price: 5,99 €
- Manufacturer: OSSCA
- EAN number: 6915093207165
- Condition: New
- Fitting Position: Air duct
- Number of pins: 2
- Item number: 55605
- Our price: 23,49 €
- Manufacturer: AIC
- EAN number: 4046283556052
- Condition: New
Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use.
For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules.
If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at:
Phone: 040 - 25 30 66 55 Email: [email protected]
This often avoids extensive troubleshooting that is disproportionate to normal repair times.
The following applies to complaints: The more complete the processes are submitted, the faster they can be processed.
Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Braking System: for vehicles with a standard brake system
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 9,2
- Test Mark: ECE R90 APPROVED
- Item number: 150.2930.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764816
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Braking System: for vehicles with a standard brake system, for vehicles with M-sport brakes
- Product line: COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18,4
- Weight [kg]: 5,5
- Test Mark: ECE R90 APPROVED
- Item number: 150.2932.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764465
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Brake Disc Type: internally vented, Perforated
- Drilled: yes
- Surface: Coated
- Machining: High-carbon
- Braking System: for vehicles with a standard brake system, for vehicles with M-sport brakes
- Product line: SPORT COAT Z
- Brake Disc Thickness [mm]: 20
- Height [mm]: 51
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18,4
- Weight [kg]: 5,5
- Test Mark: ECE R90 APPROVED
- Item number: 150.2932.52
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764830
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: BREMBO
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: Photo corresponds to scope of supply
- Braking System: for vehicles with M-performance brakes
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Height [mm]: 91
- Width [mm]: 114
- Test Mark: ECE R90 APPROVED
- Item number: 25028.180.1
- Our price: 69,99 €
- Manufacturer: ZIMMERMANN
- EAN number: 4250238761518
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: without accessories
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
-
- for brake disc diameter [mm]: 300
- Alternatively
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,6
- Height 2 [mm]: 46,3
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,2
- Thickness 1 [mm]: 15,9
- Thickness 2 [mm]: 15,9
- WVA Number: 25331, 25332
- Test Mark: E9 90R-02A0825 / 3972
- FMSI Code: D1762-8993
- Friction Lining Material: Semi-Metallic
- Item number: LP2719
- Our price: 29,49 €
- Manufacturer: DELPHI
- EAN number: 5012759519745
- Condition: New
2 pairs of pads
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,8
- Height 2 [mm]: 46,2
- Width [mm]: 123,2
- WVA Number: 25331 25332
- Item number: SKBP-0011668
- Our price: 19,49 €
- Manufacturer: STARK
- EAN number: 4059191484232
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Construction Year to: 06 / 2024
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Vehicle Equipment: for vehicles without sports package
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,2
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,8
- Item number: 0 986 479 C94
- Manufacturer: BOSCH
- EAN number: 4047025571081
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Braking System: for vehicles with M-sport brakes
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,9
- Height 2 [mm]: 46,7
- Width 2 [mm]: 123,0
- Width 1 [mm]: 123,0
- Test Mark: E1 90R-02A0169 / 0175
- MAPP code available
- Article number of recommended accessories: 24.8190-0986.2
- Observe dimensions
- Item number: 13.0460-7315.2
- Our price: 64,49 €
- Manufacturer: ATE
- EAN number: 4006633433662
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- for brake disc diameter [mm]: 300
- Quantity Unit: Axle Set
- Height 1 [mm]: 48
- Height 2 [mm]: 46,7
- Width 2 [mm]: 123,2
- Width 1 [mm]: 123,2
- Thickness 1 [mm]: 15,2
- Thickness 2 [mm]: 15,2
- Weight [kg]: 0,92
- Item number: 35030
- Our price: 20,49 €
- Manufacturer: A.B.S.
- EAN number: 8717109634365
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Braking System: for vehicles with a standard brake system
- Product line: COAT Z
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Hole Arrangement / Number: 6 / 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Weight [kg]: 9,2
- Test Mark: ECE R90 APPROVED
- Item number: 150.2930.20
- Manufacturer: ZIMMERMANN
- EAN number: 4250238764472
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Wear Warning Contact: prepared for wear warning indicator
- Thickness [mm]: 16
- Quantity Unit: Axle Set
- Height [mm]: 46,6
- Width [mm]: 123
- Test Mark: E9 90R-02A0120 / 3972
- Manufacturer Restriction: ATE
- Item number: GDB2063
- Our price: 31,99 €
- Manufacturer: TRW
- EAN number: 3322938267414
- Condition: New
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: prepared for wear warning indicator
- Article number of recommended accessories: 98052100
- Thickness [mm]: 16,2
- Quantity Unit: Axle Set
- Height 1 [mm]: 47,8
- Height 2 [mm]: 46,2
- Width [mm]: 123,2
- WVA Number: 25331
- Weight [kg]: 0,9
- Packaging length [cm]: 12,5
- Packaging width [cm]: 8,1
- Packaging height [cm]: 8
- Item number: 2533101
- Our price: 51,99 €
- Manufacturer: TEXTAR
- EAN number: 4019722469275
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Drilled: no
- Surface: Coated
- Braking System: for vehicles with a standard brake system
- Product line: COATED
- Brake Disc Thickness [mm]: 24
- Height [mm]: 45,2
- Centering Diameter [mm]: 67
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22,4
- Hub Diameter [mm]: 160
- Weight [kg]: 9,11
- Item number: 18448
- Manufacturer: A.B.S.
- EAN number: 8717109647709
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Brake System: TRW
- Wear Warning Contact: prepared for wear warning indicator
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
-
- Suspension: for vehicles without M technology
- Article number of recommended accessories: 98052000
- Thickness [mm]: 18,6
- Quantity Unit: Axle Set
- Height 1 [mm]: 74,6
- Height 2 [mm]: 70,1
- Width [mm]: 129,2
- WVA Number: 25617
- Weight [kg]: 2,1
- Packaging length [cm]: 15,2
- Packaging width [cm]: 8,8
- Packaging height [cm]: 8,4
- Item number: 2561701
- Our price: 63,49 €
- Manufacturer: TEXTAR
- EAN number: 4019722477096
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 300
- Construction Year to: 06 / 2024
- Brake Disc Type: Vented, internally vented
- Drilled: no
- Surface: Coated
- Machining: High-carbon
- Brake Disc Thickness [mm]: 20
- Height [mm]: 50,6
- Centering Diameter [mm]: 67
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 18,4
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 16,7
- Item number: 0 986 479 C95
- Manufacturer: BOSCH
- EAN number: 4047025568104
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: TRW
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Suspension: for vehicles without M technology
- Thickness [mm]: 18
- Quantity Unit: Axle Set
- Height 1 [mm]: 74,6
- Height 2 [mm]: 70,1
- Width [mm]: 129
- Article number of recommended accessories: KS0268
- Item number: 05P1985
- Our price: 67,99 €
- Manufacturer: LPR
- EAN number: 8032928163798
- Condition: New