Vehicle identification number: 0588ABQ
Audi A6 C6 Allroad 2.7 TDI quattro Sender unit, intake air temperature (163 hp Diesel CAND)
- Item number: FT01840
- Our price: 4,99 €
- Manufacturer: FAST
- EAN number: 5904157863196
- Condition: New
- Item number: P104116
- Our price: 15,99 €
- Manufacturer: PREXAparts
- EAN number: 4251162239616
- Condition: New
- TecDoc Engine Number: BSG
- Number of pins: 4
- Supplementary Article / Supplementary Info Info 2: with seal ring
- Weight [kg]: 0,04359
- Product line: Original Quality
- Packaging width [cm]: 4, 5,4
- Packaging height [cm]: 6,7, 4,9
- Packaging Depth [cm]: 6,8, 6,2
- Item number: V10-72-1039
- Our price: 27,99 €
- Manufacturer: VEMO
- EAN number: 4046001343711
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- TecDoc Engine Number: CAND
- Engine Code: CAND
- Length [mm]: 62
- Width [mm]: 54
- Height [mm]: 40
- Colour: black
- Number of connectors: 4
- Product line: Original Quality
- Packaging width [cm]: 4, 5,4
- Packaging height [cm]: 6,7, 4
- Packaging Depth [cm]: 6,8, 6,2
- Item number: V10-72-1107
- Our price: 49,49 €
- Manufacturer: VEMO
- EAN number: 4046001393235
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- Brake Disc Type: Vented
- Drilled: no
- for combined PR number: 1KW+2EE
- Brake Disc Thickness [mm]: 22
- Height [mm]: 42,5
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Item number: 25839
- Manufacturer: MAPCO
- EAN number: 4043605449443
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 347
- for PR number: 1ZL
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 30
- Height [mm]: 59,5
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Item number: 25873
- Manufacturer: MAPCO
- EAN number: 4043605420688
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Brake System: ATE
- for PR number: 1LG
- Wear Warning Contact: incl. wear warning contact
- Thickness [mm]: 20
- Quantity Unit: Axle Set
- Number of wear indicators [per axle]: 2
- Height [mm]: 72,9
- Width [mm]: 156,4
- Width 2 [mm]: 155,2
- Width 1 [mm]: 156,4
- Number of pads: 4
- Warning Contact Length [mm]: 210
- Item number: C1A042ABE
- Our price: 31,99 €
- Manufacturer: ABE
- EAN number: 5900427187238
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 347
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 30
- Height [mm]: 59,5
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 28
- Item number: BG9955
- Manufacturer: DELPHI
- EAN number: 5012759360743
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 347
- for PR number: 1ZL
- Construction Year to: 05 / 2011
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 30
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 28
- Item number: A1008V
- Manufacturer: LPR
- EAN number: 8032928001731
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 321
- for PR number: 1LG
- Construction Year to: 05 / 2011
- Brake Disc Type: internally vented
- Drilled: no
- Brake Disc Thickness [mm]: 30
- Height [mm]: 59,7
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 28
- Item number: A1019V
- Manufacturer: LPR
- EAN number: 8032928035293
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Girling
- Quantity Unit: Axle Set
- Height [mm]: 55,8
- Width [mm]: 105,3
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 17,1
- Production Number: 6010090
- Item number: 6010090
- Our price: 22,99 €
- Manufacturer: KRAFT
- EAN number: 5900427194250
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KD
- Construction Year to: 05 / 2011
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 16,9
- Quantity Unit: Axle Set
- Height [mm]: 56,4
- Width [mm]: 105,2
- Test Mark: E1 90R-02A0498 / 0349
- Vehicle Equipment: for vehicles with electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0517.2
- Number of bolts / screws: 4
- Item number: 13.0460-2749.2
- Our price: 34,99 €
- Manufacturer: ATE
- EAN number: 4006633330015
- Condition: New
for vehicles with electric handbrake
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KD
- Construction Year to: 05 / 2011
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Thickness [mm]: 17,1
- Quantity Unit: Axle Set
- Height [mm]: 55,9
- Width [mm]: 105,3
- Test Mark: E1 90R-02A0498 / 0349, E9 90R-02A1163 / 0750
- Vehicle Equipment: for vehicles without electric parking brake
- MAPP code available
- Article number of recommended accessories: 13.0460-0035.2, 13.0460-0259.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2880.2
- Our price: 34,99 €
- Manufacturer: ATE
- EAN number: 4006633119153
- Condition: New
for vehicles without electric handbrake
- Fitting Position: Rear Axle
- Paired product: FDB1636
- Diameter [mm]: 302
- for PR number: 1KD
- Brake Disc Type: solid
- Drilled: no
- Surface: Coated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Vehicle Equipment: for vehicles with electric parking brake
- Product line: PREMIER
- Brake Disc Thickness [mm]: 12
- Height [mm]: 42,4
- Centering Diameter [mm]: 66
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Weight [kg]: 10,68
- Tightening Torque [Nm]: 120
- Packing Type: Box
- Packaging length [cm]: 30,5
- Packaging width [cm]: 30,5
- Packaging height [cm]: 9,6
- Item number: DDF1850C
- Manufacturer: FERODO
- EAN number: 4044197564446
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 321
- for PR number: 1LG
- Construction Year to: 05 / 2011
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 30
- Height [mm]: 59,7
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Inner Diameter [mm]: 144,8
- Item number: 25876
- Manufacturer: MAPCO
- EAN number: 4043605425874
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 321
- for PR number: 1LG
- Brake Disc Type: Vented
- Drilled: no
- Machining: High-carbon
- Brake Disc Thickness [mm]: 30
- Height [mm]: 59,5
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 28
- Thread Size: 15,3
- Item number: C3A030ABE
- Manufacturer: ABE
- EAN number: 5900427198678
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 330
- for PR number: 1KW
- Brake Disc Type: Vented
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 22
- Height [mm]: 42,5
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0592 / 2013
- Item number: BG4087
- Manufacturer: DELPHI
- EAN number: 5012759422304
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Brake Disc Thickness [mm]: 12
- Height [mm]: 42,4
- Centering Diameter [mm]: 68
- Number of Holes: 5
- Minimum thickness [mm]: 10
- Test Mark: E1 90R-02C0100 / 1556
- Item number: BG4088
- Manufacturer: DELPHI
- EAN number: 5012759416280
- Condition: New
price incl. 19% VAT
excl. delivery costs
Sample photo only
- Fitting Position: Rear Axle
- for PR number: 1KW
- Supplementary Article / Supplementary Info: with accessories
- Supplementary Article / Supplementary Info Info 2: with adhesive film
- Quantity Unit: Axle Set
- Item number: 0897.00
- Our price: 28,49 €
- Manufacturer: REMSA
- EAN number: 8427975021977
- Condition: New
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- for PR number: 1KW, 2EE
- Construction Year to: 05 / 2011
- Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with brake caliper screws
- Vehicle Equipment: for vehicles with electric parking brake
- Thickness [mm]: 17,4
- Quantity Unit: Axle Set
- Height [mm]: 59,0
- Width [mm]: 116,1
- Test Mark: E1 90R-02A0498 / 0489
- MAPP code available
- Article number of recommended accessories: 13.0460-0023.2
- Number of bolts / screws: 4
- Observe dimensions
- Item number: 13.0460-2888.2
- Our price: 54,49 €
- Manufacturer: ATE
- EAN number: 4006633201506
- Condition: New