Vehicle identification number: 8566AAA
Ford Focus Mk2 2.5 ST Seal, drive shaft (225 hp Petrol HYDA)
- Rotation Direction: Can be used in clockwise and anticlockwise direction
- Packaging length [cm]: 5,5
- Packaging width [cm]: 5,5
- Packaging height [cm]: 1,0
- Item number: 95NES-40551010C
- Our price: 7,59 €
- Manufacturer: FEBEST
- EAN number: 4056111140940
- Condition: New
- Thickness [mm]: 12
- Inner Diameter [mm]: 40
- Packaging length [cm]: 6,2
- Packaging width [cm]: 6,2
- Packaging height [cm]: 1,3
- Diameter [mm]: 55
- Item number: 95LDS-40551213C
- Our price: 10,99 €
- Manufacturer: FEBEST
- EAN number: 4056111100999
- Condition: New
- Fitting Position: Exhaust Side, Outlet
- Thickness [mm]: 12
- Inner Diameter [mm]: 40
- Material: ACM (Polyacrylate)
- Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Diameter [mm]: 55
- Item number: 70-0010
- Our price: 11,49 €
- Manufacturer: MAXGEAR
- EAN number: 5901619582572
- Condition: New
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Surface: Oiled
- Supplementary Article / Supplementary Info Info 2: without bolts / screws
- Product line: PREMIER
- Brake Disc Thickness [mm]: 11
- Height [mm]: 51
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Weight [kg]: 10,4
- Tightening Torque [Nm]: 140
- Packing Type: Box
- Packaging length [cm]: 31
- Packaging width [cm]: 31
- Packaging height [cm]: 7
- Item number: DDF1616
- Manufacturer: FERODO
- EAN number: 4044197459919
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Construction Year from: 02 / 2008
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 11
- Height [mm]: 50,5
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Item number: 25820
- Manufacturer: MAPCO
- EAN number: 4043605449382
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 265
- Construction Year to: 02 / 2011
- Brake Disc Type: solid
- Drilled: no
- suitable for rim size [inch]: 15, 16
- Brake Disc Thickness [mm]: 10,9
- Height [mm]: 40,7
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 10
- Thread Size: 13,75
- Item number: C4G009ABE
- Manufacturer: ABE
- EAN number: 5900427205543
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 11
- Height [mm]: 50,8
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Thread Size: 15,8
- Item number: C4G012ABE
- Manufacturer: ABE
- EAN number: 5900427205574
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,5
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Minimum thickness [mm]: 23
- Test Mark: E1 90R-02C0373 / 0060
- Item number: BG3895
- Manufacturer: DELPHI
- EAN number: 5012759309148
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 280
- Construction Year to: 01 / 2008
- Brake Disc Type: solid
- Drilled: no
- Rim Size [inch]: 17.0
- Brake Disc Thickness [mm]: 11
- Number of Holes: 5
- Minimum thickness [mm]: 9
- Item number: F1010P
- Manufacturer: LPR
- EAN number: 8032928082150
- Condition: New
price incl. 19% VAT
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Construction Year from: 02 / 2008
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 11
- Height [mm]: 50,8, 51
- Centering Diameter [mm]: 63,4
- Item number: F1018P
- Manufacturer: LPR
- EAN number: 8032928084734
- Condition: New
price incl. 19% VAT
- Fitting Position: Front Axle
- Diameter [mm]: 300
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: ORIGINAL Quality
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,7
- Centering Diameter [mm]: 63,5
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 13,7
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 23
- Required quantity: 2
- Item number: 515 521 5027
- Manufacturer: MEYLE
- EAN number: 4040074415474
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Quantity Unit: Axle Set
- Height [mm]: 51,9
- Width [mm]: 123,0
- Test Mark: ECE R-90
- Brake Disc Thickness [mm]: 15,8
- Production Number: 6015105
- Item number: 6015105
- Our price: 21,49 €
- Manufacturer: KRAFT
- EAN number: 5900427194465
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 280, 280,0
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 10,9
- Height [mm]: 40,8
- Centering Diameter [mm]: 63,6
- Number of Holes: 5
- Production Number: 6052206
- Item number: 6052206
- Manufacturer: KRAFT
- EAN number: 5900427205598
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 280
- Construction Year to: 01 / 2008
- Brake Disc Type: solid
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 11
- Height [mm]: 40,8
- Centering Diameter [mm]: 63,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Weight [kg]: 5,19
- Brake Disc Hub Height [mm]: 29,85
- Packaging width [cm]: 30
- Packaging height [cm]: 9
- Packaging Depth [cm]: 30
- fulfils ECE norm: R90
- Item number: V25-40009
- Manufacturer: VAICO
- EAN number: 4046001551987
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Brake System: ATE
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 16,6
- Quantity Unit: Axle Set
- Height [mm]: 52,0
- Width [mm]: 123,0
- Test Mark: E9 90R-02A1382 / 2272
- MAPP code available
- Observe mounting information
- Item number: 13.0460-7195.2
- Our price: 34,49 €
- Manufacturer: ATE
- EAN number: 4006633149839
- Condition: New
Replaces brake pad with springs with retroactive effect. See item picture for further information.
- Fitting Position: Front Axle
- Brake System: ATE
- Construction Year to: 02 / 2011
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Thickness [mm]: 18,8
- Quantity Unit: Axle Set
- Height 1 [mm]: 72,9
- Height 2 [mm]: 72,9
- Width 2 [mm]: 156,3
- Width 1 [mm]: 155,1
- Test Mark: E9 90R-02A1259 / 0708
- MAPP code available
- Item number: 13.0460-7204.2
- Our price: 45,49 €
- Manufacturer: ATE
- EAN number: 4006633188449
- Condition: New
- Fitting Position: Rear Axle
- Brake System: LUCAS
- Construction Year from: 02 / 2008
- Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact
- Supplementary Article / Supplementary Info Info 2: with anti-squeak plate
- Vehicle Equipment: for vehicles without electric parking brake
- Thickness [mm]: 16
- Quantity Unit: Axle Set
- Height [mm]: 43,2
- Width [mm]: 95,2
- Item number: 6854
- Our price: 15,99 €
- Manufacturer: MAPCO
- EAN number: 4043605455598
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Brake Disc Type: Vented
- Drilled: no
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,5
- Centering Diameter [mm]: 63
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 13,8
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 23
- Item number: BDC5488
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438084962
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Rear Axle
- Diameter [mm]: 302
- Brake Disc Type: solid
- Drilled: no
- Brake Disc Thickness [mm]: 11
- Height [mm]: 51
- Centering Diameter [mm]: 63
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 9
- Item number: BDC5561
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438158403
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 320
- Construction Year to: 02 / 2011
- Brake Disc Type: Vented
- Drilled: no
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 25
- Height [mm]: 48,7
- Centering Diameter [mm]: 63,5
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 108
- Minimum thickness [mm]: 23
- Brake Disc Hub Height [mm]: 23,5
- Packaging width [cm]: 32
- Packaging height [cm]: 10
- Packaging Depth [cm]: 32
- Item number: V25-80022
- Manufacturer: VAICO
- EAN number: 4046001550621
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
price incl. 19% VAT
excl. delivery costs