Renault Trafic FL 1.9 dCi Reverse lights (102 hp Diesel F9Q 760)

Fully ECE compliant auxiliary high beam, with 13 high power Wide beam pattern: improved near field illumination. Improved road safety: light beam range of 36m, LEDs, 1100 lumens and 36m headlight range. Over / under voltage protection, thermal management system, shatterproof polycarbonate lens, Thermoplastic housing

Fully ECE compliant auxiliary high beam, with 14 high power Wide beam pattern: improved near field illumination. Improved road safety: light beam range of 36m, LEDs, 1100 lumens and 36m headlight range. Over / under voltage protection, thermal management system, shatterproof polycarbonate lens, Thermoplastic housing

Clear lens. Clear lens, without optical pattern. Reversing lamp with fixing screws

Regarding single or double function lamps with LEDs without flasher function

In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.