Audi A3 Saloon 40 TDI quattro Gear lever repair kit (184 hp Diesel DJGA)
- for PR number: 0EN
- Vehicle Equipment: for vehicles with gear shift cable
- Supplementary Article / Supplementary Info Info 2: with slide bearing, with fuse
- Supplementary Article / Supplementary Info: with retaining
- Item number: 118 291
- Our price: 20,19 €
- Manufacturer: TOPRAN
- EAN number: 4063926039956
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
price incl. 19% VAT
excl. delivery costs
-
- Transmission Type: 6-Speed Manual Transmission
- for PR number: 0EC
- Vehicle Equipment: for vehicles with gear shift cable
- Supplementary Article / Supplementary Info Info 2: with slide bearing, with fuse
- Supplementary Article / Supplementary Info: with retaining
- Material: Plastic
- Item number: 27-1499
- Our price: 21,15 €
- Manufacturer: MAXGEAR
- EAN number: 5905141961232
- Condition: New
-
- Transmission Type: 6-Speed Manual Transmission
- for PR number: 0EC
- Vehicle Equipment: for vehicles with gear shift cable
- Supplementary Article / Supplementary Info Info 2: with slide bearing, with fuse
- Supplementary Article / Supplementary Info: with retaining
- Item number: 118 292
- Our price: 21,59 €
- Manufacturer: TOPRAN
- EAN number: 1363060000014
- Condition: New
Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for PR number: 0EN
- Vehicle Equipment: for vehicles with gear shift cable
- Supplementary Article / Supplementary Info Info 2: with slide bearing, with fuse
- Supplementary Article / Supplementary Info: with retaining
- Item number: 27-1500
- Our price: 25,26 €
- Manufacturer: MAXGEAR
- EAN number: 5905141961249
- Condition: New

- for PR number: 0EJ
- Vehicle Equipment: for vehicles with gear shift cable
- Fitting Position: Front, at gearshift linkage
- Supplementary Article / Supplementary Info: with retaining
- Supplementary Article / Supplementary Info Info 2: with slide bearing, with fuse
- Transmission ID: MQ 250
- Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission
- Item number: 121 474
- Our price: 30,71 €
- Manufacturer: TOPRAN
- EAN number: 221024924503700245037
- Condition: New
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- for PR number: 1ZA
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Inner Diameter [mm]: 146
- Machining: High-carbon
- No. of holes 2: 9
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: C3W039ABE
- Manufacturer: ABE
- EAN number: 5901655214055
- Condition: New
- Fitting Position: Rear Axle
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,3
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 20
- Thread Size: 15,5
- Drilled: no
- Item number: C4W014ABE
- Manufacturer: ABE
- EAN number: 5900427206786
- Condition: New
-
- Fitting Position: Rear Axle
- for PR number: 1KY
- Diameter [mm]: 310
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22
- Height [mm]: 48,5
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 20
- Test Mark: E1 90R-02C0289 / 1665
- Drilled: no
- Item number: BG3975
- Manufacturer: DELPHI
- EAN number: 5012759370155
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Supplementary Info: ORIGINAL Quality
- for PR number: 1ZA, 1ZD
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Wheel Bolt Bore Diameter [mm]: 15,3
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Required quantity: 2
- Drilled: no
- Item number: 115 521 1094
- Manufacturer: MEYLE
- EAN number: 4040074429006
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KE
- Diameter [mm]: 272
- Brake Disc Type: solid
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48,3
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- fulfils ECE norm: ECE-R90
- Bore Diameter up to [mm]: 15,3
- Drilled: no
- Item number: 0 986 479 677
- Manufacturer: BOSCH
- EAN number: 4047024749801
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Fitting Position: Front Axle
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5416
- Manufacturer: QUINTON HAZELL
- EAN number: 5050438069259
- Condition: New
price incl. 19% VAT
excl. delivery costs
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 50
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 22
- Drilled: no
- Item number: BDC5418
- Manufacturer: QUINTON HAZELL
- EAN number: 5016593840775
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1KR
-
- for PR number: 2EJ
-
- for PR number: 2EG
-
- for PR number: 1KE
- Fitting Position: Rear Axle
- Diameter [mm]: 272
- Brake Disc Type: solid
- Supplementary Info: Original VAICO Quality
- Brake Disc Thickness [mm]: 9,7
- Height [mm]: 48,2
- Centering Diameter [mm]: 65
- Rim Hole Number: 5
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 8
- Brake Disc Hub Height [mm]: 38,2
- Packaging width [cm]: 28
- Packaging height [cm]: 10
- Packaging Depth [cm]: 28
- Drilled: no
- Item number: V10-40086
- Manufacturer: VAICO
- EAN number: 4046001550584
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
- for PR number: 1KJ, 1KY, 1KZ
- Vehicle Equipment: for vehicles with electric parking brake
- Fitting Position: Rear Axle
- Diameter [mm]: 310,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 22,0
- Height [mm]: 48,5
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 20,0
- Inner Diameter [mm]: 169,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0118 / 0945
- Bore Diameter [mm]: 15,3
- Drilled: no
- Item number: 24.0122-0219.1
- Manufacturer: ATE
- EAN number: 4006633229630
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZA, 1ZD
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0858 / 1214
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0158.1
- Manufacturer: ATE
- EAN number: 4006633312677
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Rear Axle
- for PR number: 1KE, 1KR
- paired article number: FDB4434
- Diameter [mm]: 272
- Brake Disc Type: solid
- Product line: PREMIER
- Brake Disc Thickness [mm]: 10
- Height [mm]: 48
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 9
- Bolt Hole Circle Ø [mm]: 112
- Minimum thickness [mm]: 9
- Weight [kg]: 6,2
- Tightening Torque [Nm]: 120
- Test Mark: R90 homologated
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Packing Type: Box
- Packaging length [cm]: 27,5
- Packaging width [cm]: 27,5
- Packaging height [cm]: 10,5
- Drilled: no
- Item number: DDF1895
- Manufacturer: FERODO
- EAN number: 4044197541324
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- Fitting Position: Front Axle
- for PR number: 1ZA, 1ZD
- Diameter [mm]: 312
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25
- Height [mm]: 49,9
- Surface: Oiled
- Centering Diameter [mm]: 65
- Number of Holes: 5
- Minimum thickness [mm]: 22
- Test Mark: E1 90R-02C0277 / 1198
- Drilled: no
- Item number: BG3953
- Manufacturer: DELPHI
- EAN number: 5012759360545
- Condition: New
-
- for PR number: 1ZE, 1ZP
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 144,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 0010
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0145.1
- Manufacturer: ATE
- EAN number: 4006633113472
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZA, 1ZD
- Fitting Position: Front Axle
- Diameter [mm]: 312,0
- Brake Disc Type: Vented
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 146,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0115 / 1001
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0125-0158.1
- Manufacturer: ATE
- EAN number: 4006633209489
- Condition: New
price incl. 19% VAT
excl. delivery costs
-
- for PR number: 1ZE, 1ZP
- Fitting Position: Front Axle
- Diameter [mm]: 288
- Brake Disc Type: Vented
- Product line: PowerDisc
- Brake Disc Thickness [mm]: 25,0
- Height [mm]: 49,9
- Surface: Coated
- Centering Diameter [mm]: 65,0
- Number of Holes: 5
- Bolt Hole Circle Ø [mm]: 112,0
- Minimum thickness [mm]: 22,0
- Inner Diameter [mm]: 144,0
- Machining: High-carbon
- MAPP code available
- No. of holes 2: 9
- Test Mark: E1 90R-02C0858 / 1210
- Bore Diameter [mm]: 15,3
- Supplementary Article / Supplementary Info Info 2: with bolts / screws
- Drilled: no
- Item number: 24.0325-0145.1
- Manufacturer: ATE
- EAN number: 4006633128186
- Condition: New
For vehicles without ABS, a PowerDisc can be used on the rea r axle only if there is one on the front axle. The General Operating Permit (ABE) for the PowerDisc applies to operation on German roads in accordance with the German Road Traffic Registration Ordinance (StVZO). Other countries may require additional type approvals for use on roads.
price incl. 19% VAT
excl. delivery costs