Hyundai i40 VF 1.7 CRDi Clutch kit (141 hp Diesel D4FD)
Recommended part replacement interval for your car for the part category Clutch kit: every 100.000 km
- Supplementary Article / Supplementary Info: without central slave cylinder
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of Teeth: 23
- Transmission Type: 6-Speed Manual Transmission
- Product line: KIT2P
- New Part
- Hub Profile: 26,14 x 23,16
- Weight [kg]: 7,52
- Clutch: for vehicles with push type clutch
- Item number: 828472
- Our price: 205,00 €
- Manufacturer: VALEO
- EAN number: 3276428284729
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Number of Teeth: 23
- Transmission Type: Manual Transmission
- Friction Lining Outer Diameter [mm]: 240
- Number of Parts [parts]: 2
- Item number: J20005017
- Our price: 159,49 €
- Manufacturer: HERTH+BUSS JAKOPARTS
- EAN number: 4029416438487
- Condition: New
price incl. 19% VAT
- Transmission Type: 6-Speed Manual Transmission
- Packaging width [cm]: 34
- Packaging height [cm]: 33
- Packaging Depth [cm]: 7,2
- Item number: A52-0016
- Our price: 244,50 €
- Manufacturer: ACKOJA
- EAN number: 4046001748769
- Condition: New
In the warranty, we always make a distinction between wear Products supplied by us are without exception intended for parts and vehicle parts. All wear parts are subject to a the designated use. Please note that our products are usually delivered without reduced warranty period and a maximum mileage.
installation instructions. Brake components such as brake disks, brake pads, etc. Installation may only be carried out by trained specialist maximum of 1000 km (break-in period). Therefore, warranty personnel. claims for brake parts are only reviewed with an There is no guarantee for inappropriate, improper or installation invoice and a record of the wheel hub run-out unintended use.
measurement, including photos.
For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced.
If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Diameter [mm]: 240
- Number of Teeth: 23
- Transmission Type: 6-Speed Manual Transmission
- Observe service information
- only available in set
- Item number: 3000 952 017
- Our price: 267,00 €
- Manufacturer: SACHS
- EAN number: 4059923094371
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Diameter [mm]: 240
- Number of Teeth: 23
- Transmission Type: 6-Speed Manual Transmission
- Product line: XTend
- only available in set
- Item number: 3000 954 417
- Our price: 185,99 €
- Manufacturer: SACHS
- EAN number: 4013872851386
- Condition: New
Only available as KIT without releaser
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing
- Diameter [mm]: 240
- Number of Teeth: 23
- Product line: Clutch Set (2P)
- Multi-piece: two-piece
- Item number: KY-121R
- Our price: 291,00 €
- Manufacturer: AISIN
- EAN number: 5411450701129
- Condition: New
(Two-piece,with clutch pressure plate,with clutch plate,without releaser)
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info: with central slave cylinder
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of Teeth: 20
- Transmission Type: 6-Speed Manual Transmission
- Construction Year to: 07 / 2018
- Hub Profile: 23.1x26.1
- Multi-piece: three-piece
- Friction Lining Outer Diameter 1 [mm]: 240
- Item number: JT18361081
- Our price: 423,00 €
- Manufacturer: RYMEC
- EAN number: 5056147853974
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, Requires special tools for mounting, Check and replace dual-mass flywheel if necessary.
- Diameter [mm]: 240
- Engine Features / Arrangement: for engines with dual-mass flywheel
- Adjustment: with automatic adjustment
- Item number: 624 3561 09
- Our price: 384,50 €
- Manufacturer: LuK
- EAN number: 4014870133870
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing
- Diameter [mm]: 240
- Number of Teeth: 23
- Product line: CSC Kit (3P)
- Multi-piece: three-piece
- Item number: CKY-121R
- Our price: 401,00 €
- Manufacturer: AISIN
- EAN number: 5411450701204
- Condition: New
(Three-piece,with clutch pressure plate,with clutch plate,without releaser,with central slave cylinder)
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info: with central slave cylinder
- Diameter [mm]: 240
- Adjustment: with automatic adjustment
- Item number: 624 3561 33
- Our price: 268,50 €
- Manufacturer: LuK
- EAN number: 4014870561925
- Condition: New
- Diameter [mm]: 240
- Number of Teeth: 23
- Transmission Type: 6-Speed Manual Transmission
- Alternative Repair Kit: 3000 954 417
- only available in set
- Item number: 3000 990 543
- Our price: 437,00 €
- Manufacturer: SACHS
- EAN number: 4059923018681
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info Info 2: without clutch release bearing
- Diameter [mm]: 240
- Number of Teeth: 23
- Centering Diameter [mm]: 26
- TecDoc Engine Number: D4FD
- Number of Parts [parts]: 2
- Item number: 201-07122
- Our price: 371,50 €
- Manufacturer: IAP QUALITY PARTS
- EAN number: 226359146875261468752
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info Info 2: with flywheel
- Diameter [mm]: 240
- Transmission Code: 6MT2WD
- Transmission Type: Manual Transmission
- Engine Code: D4FD
- Construction Year from: 04 / 2015
- Diameter 1 [mm]: 241,5
- Diameter 2 [mm]: 240
- Adjustment: with automatic adjustment
- Quantity Unit: Set
- Item number: 10S0551-OYO
- Our price: 686,50 €
- Manufacturer: Oyodo
- EAN number: 226984177677271776772
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info: with central slave cylinder, with dual-mass flywheel
- Supplementary Article / Supplementary Info Info 2: without screw set
- Clutch Pressure Plate Outer Diameter [mm]: 240
- Number of Teeth: 20
- Transmission Type: 6-Speed Manual Transmission
- Hub Profile: 23.1x26.1
- Multi-piece: four-piece
- Adjustment: without automatic adjustment
- Friction Lining Outer Diameter 1 [mm]: 240
- Item number: DF3042
- Our price: 753,00 €
- Manufacturer: RYMEC
- EAN number: 5056147854292
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info: with clutch pressure plate
- Supplementary Article / Supplementary Info Info 2: with clutch disc, without clutch release bearing, with flywheel
- Diameter [mm]: 240
- Number of Teeth: 23
- Product line: SuperKit (3P)
- Multi-piece: three-piece
- Engine Features / Arrangement: for engines with dual-mass flywheel
- Item number: SKY-121R
- Our price: 765,50 €
- Manufacturer: AISIN
- EAN number: 5411450701167
- Condition: New
(for engines with dual-mass flywheel,Three-piece,with clutch pressure plate,with clutch plate,without releaser,with flywheel,Check and replace dual-mass flywheel if necessary.)
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info: with clutch pressure plate, with central slave cylinder
- Supplementary Article / Supplementary Info Info 2: with clutch disc, with flywheel
- Diameter [mm]: 240
- Number of Teeth: 23
- Product line: Super CSC Kit (4P)
- Multi-piece: four-piece
- Engine Features / Arrangement: for engines with dual-mass flywheel
- Item number: SCKY-121R
- Our price: 837,50 €
- Manufacturer: AISIN
- EAN number: 5411450701174
- Condition: New
(for engines with dual-mass flywheel,Four-piece,with clutch pressure plate,with clutch plate,with flywheel,with central slave cylinder,Check and replace dual-mass flywheel if necessary.)
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- for flywheel manufacturer: VALEO
- Diameter [mm]: 220
- Clutch Pressure Plate Outer Diameter [mm]: 263
- Transmission Type: 7-Speed Dual-Clutch Transmission
- Construction Year to: 07 / 2018
- Construction Year from: 04 / 2015
- TecDoc Engine Number: D4FD
- New Part
- Weight [kg]: 15,78
- Clutch: for vehicles with double clutch
- Outer Diameter 2 [mm]: 215
- Number of Teeth 1: 28
- Number of Teeth 2: 46
- Item number: 855102
- Our price: 1078,50 €
- Manufacturer: VALEO
- EAN number: 3276428551029
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info Info 2: Requires special tools for mounting, with bearing(s), with release fork
- Diameter [mm]: 273
- Number of Teeth: 28
- Transmission Type: 7-Speed Automatic Transmission
- Clutch Type: for dual plate clutches
- Item number: DKY-002
- Our price: 1081,00 €
- Manufacturer: AISIN
- EAN number: 5411450754149
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info: with dual-mass flywheel, with central slave cylinder
- Transmission Type: Manual Transmission
- Emission Standard: Euro 6
- Product line: FULLPACK DMF (CSC)
- New Part
- Weight [kg]: 21,14
- Item number: 837411
- Our price: 1075,50 €
- Manufacturer: VALEO
- EAN number: 3276428374116
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- Supplementary Article / Supplementary Info Info 2: with clutch release bearing, with release fork, Requires special tools for mounting
- for flywheel manufacturer: VALEO
- Diameter [mm]: 235
- Clutch Pressure Plate Outer Diameter [mm]: 273
- Transmission Type: 7-Speed Dual-Clutch Transmission
- New Part
- Weight [kg]: 17,86
- Clutch: for vehicles with double clutch
- Outer Diameter 2 [mm]: 229
- Number of Teeth 1: 28
- Number of Teeth 2: 46
- Item number: 855101
- Our price: 1157,50 €
- Manufacturer: VALEO
- EAN number: 3276428551012
- Condition: New
- Accumulate your bonuses through purchasing items marked “BONUS";
- Pay for up to 10% of your order with the accumulated bonuses;
price incl. 19% VAT
- 1
- 2